FCC ID: PY320100477 Orbi Cable Modem Router

Set up and activate using the NETGEAR Orbi app Set up using the Orbi Cable Modem Router web interface Quick Start Guide Model CBR750 Set up your Orbi cable modem router and activate your Internet service with the NETGEAR Orbi app. Note: Do not attempt to mount or hang your cable modem router on the wall or ceiling. Doing so might create a hazardous situation and might damage your cable modem router, which might not be covered by NETGEARs warranty. If you do not want to use the NETGEAR Orbi app, set up your cable modem router using the instructions in Set Up Using the Orbi Cable Modem Router Web Interface, and activate your Internet service using the instructions in Activate Your Internet Service. 1. Scan a QR code or search for NETGEAR Orbi in the Apple App Store or Google Play Store. 2. Download and launch the NETGEAR Orbi app on your mobile device and follow the prompts. 7. Launch a web browser and set up your cable modem router. You are automatically redirected to the cable modem router web interface. If youre not redirected, enter orbilogin.com or 192.168.1.1 in the address field of the web browser. Follow the prompts. You are asked to do the following:

Agree to the Terms and Conditions Change your routers admin credentials and set up security questions Set up your WiFi network name and password 8. Make sure that you can log in to the cable modem router web interface after the setup. In a new web browser window, enter orbilogin. com or 192.168.1.1 and then enter the cable modem router admin user name and password. If the BASIC Home page displays, you are ready to activate your Internet service. 9. Activate your Internet service. For information about how to activate your Internet service, see Activate Your Internet Service. Activate your Internet service Before you start the self-activation process, collect the following information:

Your ISP account information Cable modem router model number, which is CBR750 Cable modem router serial number Cable modem router MAC address Your cable modem routers serial number and MAC address are on the cable modem router label. The following table lists contact information for ISPs that support your cable modem router. ISP Cox Contact Information https://www.cox.com/activate 1-800-234-3993 Mediacom https://maestro.mediacomcc.com/

walledgarden/page/login.jsp 1-855-Mediacom (1-855-633-4226) Optimum Sparklight Spectrum Xfinity https://install.optimum.com/JointInstall/

1-877-810-6750 https://support.sparklight.com/

1-877-692-2253 https://activate.spectrum.net/

1-833-267-6094 https://xfinity.com/activate https://www.xfinity.com/support/internet/

activate-purchased-modem/

1-800-XFINITY (1-800-934-6489) Note: Your ISPs contact information might change. You can also find the contact information in your monthly Internet service billing statement. 1. Visit your ISPs website and follow the onscreen instructions to activate your Internet service. 2. To determine the accurate Internet speed, visit your ISPs speed test website and perform a speed test. 1. Collect your Internet service provider (ISP) account information. Collect your ISP account information, such as your account mobile phone number, user name, password, and account number. 2. Turn off and disconnect existing modems and routers. If you are replacing a modem that is currently connected in your home, unplug the modem and plug the new cable modem router into the same outlet. 3. Connect a coaxial cable. Use a coaxial cable to connect the coaxial cable connector on the cable modem router to the cable wall outlet. 4. Connect the power adapter. Connect the power adapter to cable modem router and plug the power adapter into an electrical outlet. The startup procedure takes about one minute. When it is complete, the Power LED lights solid white. 5. Wait for the Online LED to light solid white. This process might take up to 10 minutes. Note: When the Online LED lights, your cable modem router is still not connected to the Internet. You must activate your cable modem router with your ISP. 6. Connect your computer or mobile device to the Orbi cable modem router with Ethernet or WiFi:

Ethernet. Use an Ethernet cable to connect a computer to an Ethernet port on the cable modem router. WiFi. Use the WiFi network name (SSID) and password on the cable modem router label to connect. January 2020 Support Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support to register your product, get help, access the latest downloads and user manuals, and join our community. We recommend that you use only official NETGEAR support resources. Customer-owned cable modem routers might not be compatible with certain Internet service providers

(ISPs). Check with your ISP to confirm that this NETGEAR cable modem router is allowed on your ISPs network. If you are experiencing trouble installing your NETGEAR product, contact NETGEAR at 1-866-874-8924. For regulatory compliance information, visit http://www.netgear.com/about/regulatory/. See the regulatory compliance document before connecting the power supply. Note to CATV System Installer: The Coaxial cable shield shall be connected to the grounding system of the building, as close to the point of cable entry as practical. NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134, USA NETGEAR INTERNATIONAL LTD Floor 1, Building 3 University Technology Centre Curraheen Road, Cork, T12EF21, Ireland NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEAR trademarks are used for reference purposes only. Package contents Orbi Cable Modem Router LEDs Orbi Cable Modem Router overview 2 3 4 5 Orbi Cable Modem Router

(Model CBR750) Power adapter Ethernet cable 1 6 1 2 3 4 5 6 7 8 9 9 10 7 8 Ring LED Power LED Downstream LED Upstream LED Online LED Ethernet ports Coaxial cable connector Reset button DC power connector 10 Sync button (also used for WPS connection) Downstream Solid amber. One downstream channel is Power Upstream Online Solid white. The cable modem router is receiving power and is functioning normally. Off. The cable modem router is not receiving power. Solid red. The cable modem router is too warm and might overheat. locked. Solid white. Two or more downstream channels are locked. Blinking white. The cable modem router is scanning for a downstream channel. Off. No downstream channel is locked. Solid amber. One upstream channel is locked. Solid white. Two or more upstream channels are locked. Blinking white. The cable modem router is scanning for a upstream channel. Off. No upstream channel is locked. Solid white. The cable modem router is online. Blinking white. The cable modem router is synchronizing with the cable providers cable modem termination system (CMTS). Off. The cable modem router is offline. Note: If the Downstream and Upstream LEDs blink white after the Online LED lights solid white, the downstream and upstream channels are in partial service. Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. For operation within 5.15 ~ 5.25GHz / 5.47 ~5.725GHz frequency range, it is restricted to indoor environment. This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules.

Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 32cm between the radiator & your body.

FCC LABEL LOCATION The label will be permanently affixed at a conspicuous location on the device. EUT Bottom Label

(Fig. 1) FCC ID: PY3320100477

NOTE:

1. REFER TO NETGEAR SPEC. DOC-00093 FOR COLOR TOLERANCES. 2. INK COLOR IS SHOWN TO THE RIGHT. 3. DIE LINES ARE MAGENTA COLOR AND DO NOT PRINT. 4. MAC & SERIAL NUMBERS TO BE PRINTED BY THE ODM. 5. See NTGR DOC-00112 for SN standard. 6. SN, MAC address, to be encoded QR (2D) barcode. A. EACH DATA ELEMENT IS TO BE SEPARATED BY A SEMICOLON WITH NO SPACE, AND TO BE PRINTED IN THIS EXACT ORDER. ELEMENT: SN:SERIAL NUMBER;SK:NETGEAR SKU NAME;MAC:MAC ADDRESS;

EXAMPLE: 510789235724097;ORBI BASE STATION;8A:00:27:C5:84:B3 The definition and sequence of QR code WIFI:S:SSID;T:WPA2;P:PASSWORD;SN:SERIAL NUMBER;SK:NETGEAR SKU NAME;MAC:MAC ADDRESS;

The information of string

[WIFI:S:SSID]->(WIFI:S:Orbi_setup)->fix character

[T:WPA2;P:]-> (T:WPA2;P:)->fix character

[SN:SERIAL NUMBER] ->(SN:)->/ (SERIAL NUMBER)->(EX:@62NDYMSC00001@)

[SK:NETGEAR SKU NAME] -> (SK:)->/ NETGEAR SKU NAME->&By work order and 7. INSURE COUNTRY OF ORIGIN IS CORRECT. A. IF COUNTRY OF ORIGIN IS PRE-PRINTED, UNHIDE THE APPROPRIATE COUNTRY OF ORIGIN LAYER AND INCLUDE COUNTRY OF ORIGIN ON LABEL. B. IF COUNTRY OF ORIGIN IS POST-PRINTED USING A THERMAL PRINTER (OR EQUIVALENT), OMIT TEXT FROM ARTWORK (USE LAYERS). REV 01 DESCRIPTION OF REVISION UPDATED FCC ID ENG APPD DATE R HU 03FEB2020 6 7 Made in Taiwan Made in Thailand 12.5mm 12.5mm Pantone Cool Gray 11C AUTHOR:

SHEET:

AHAN 1 of 1 TITLE:

AW,PLBL,CBR750NA,V1 THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR WHEREWITH IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR IN PART TO ANYONE WITHOUT THE PERMISSION OF NETGEAR, INC. P/N:

AW-14438-02 REV:

01

NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA Tel:408-890-3657/Fax:408-907-8097 P O W E R O F A T T O R N E Y Date: 2020/02/05 FCC ID: PY320100477 To whom it may concern:

We, the undersigned, hereby authorize Amanda Wu of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Amanda Wu of BV CPS Taoyuan on our behalf shall have the same effect as acts of our own. If you have any questions regarding the authorization, please dont hesitate to Contact us. Thank you!

Sincerely yours,

David Kay / Regulatory Compliance Director Tel: 4088903657 Fax: 4089078097 E-mail: david.kay@netgear.com

NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA Tel:408-890-3657/Fax:408-907-8097 Date: 2020/02/05 FCC ID: PY320100477 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below:

Schematics Block Diagram Operational Description Software Operational Description Operational Description-Antenna Specification The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours,

David Kay / Regulatory Compliance Director Tel: 4088903657 Fax: 4089078097 E-mail: david.kay@netgear.com

NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA Tel:408-890-3657/Fax:408-907-8097 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request FCC ID: PY320100477 Date: February 5, 2020 Pursuant to Sections 0.457 and 0.459 of the commissions rules, we request short-term confidential treatment for the following information until 180 days in order to ensure sensitive business information remains confidential until the actual marketing of the device:

External photos Test Setup photos Users manual Internal Photos Sincerely yours,

David Kay / Regulatory Compliance Director Tel: 4088903657 Fax: 4089078097 E-mail: david.kay@netgear.com

NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA Tel:408-890-3657/Fax:408-907-8097 Date: 2020/02/05 G E N E R A L D E C L A R A T I O N We, NETGEAR, INC. declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non-

US channels in all the operational mode(s) for the following product. FCC ID: PY320100477 If you have any questions regarding the authorization, please dont hesitate to contact us. Thank you!

David Kay / Regulatory Compliance Director Tel: 4088903657 Fax: 4089078097 E-mail: david.kay@netgear.com