FCC ID: PY322100556 Orbi Router, Orbi Satellite

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/5987610.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 32 cm between the radiator & your body.

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/5987611.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Lets get started Device Manager Internet Speed Devices (8) Traffic Meter Data used: 35 GB Security Activated Network Map WiFi Settings ORBI66 3 Do more with the app Check out everything you can do on the Orbi app! Pause the Internet, run a speed test, set smart parental controls, and more. 1 Download the Orbi app and install your Orbi WiFi system On your mobile phone, download the Orbi app and follow the setup instructions. 2 Secure your devices with NETGEAR Armor Tap the Security icon in your Orbi app to verify that your NETGEAR Armor is activated. Your Orbi comes with NETGEAR Armor cybersecurity. Armor blocks online threats like hackers and phishing attempts on your devices. Contents Orbi Router Overview Orbi Satellite X 2 Ethernet Cable Power Adapter X 3

(varies by region) 1 2 3 4 65 1 3 4 65 Orbi Router Orbi Satellite 1 2 3 4 5 6 Sync Button Internet Port Ethernet Ports Power LED Power Connector Reset Button Troubleshooting Support and Community If youre having problems with the installation, try one of the following:

Turn off your modem and Orbi router and disconnect them. Reboot your modem. Reconnect your Orbi router to your modem, and try installing with the Orbi app again. If youre still unable to install your Orbi router using the Orbi app, manually install it using the router web interface. Visit orbilogin.com to access the router web interface. For more information, visit netgear.com/orbihelp. NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134, USA NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any nonNETGEAR trademarks are used for reference purposes only. NETGEAR INTERNATIONAL LTD Floor 1, Building 3, University Technology Centre Curraheen Road, Cork, T12EF21, Ireland April 2022 Visit netgear.com/support to get your questions answered and access the latest downloads. You can also check out our NETGEAR Community for helpful advice at community.netgear.com. Regulatory and Legal Si ce produit est vendu au Canada, vous pouvez accder ce document en franais canadien https://www.netgear.com/support/download/.

(If this product is sold in Canada, you can access this document in Canadian French at https://www.netgear.com/support/download/.) For regulatory compliance information including the EU Declaration of Conformity, visit https://www.netgear.com/about/regulatory/. See the regulatory compliance document before connecting the power supply. For NETGEARs Privacy Policy, visit https://www.netgear.com/about/privacy-policy. By using this device, you are agreeing to NETGEARs Terms and Conditions at https://www.netgear.com/about/terms-and-conditions. If you do not agree, return the device to your place of purchase within your return period.

oro} Router Model: RBR8G0 MALLE SIele NET ES1 19D) LUNN CLES This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful XE led GUC aielas)) interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: PY322100556 Gorm Gorm http://orbilogin. 3 smn For indoor use only ESET password _) NETGEAR, INC. } Input: 12V == 3.54 Made in Vietnam |_admin 13990-01 orb} Satellite Model: RBS860 MALLE SeLe NET ES1 19D) UV NON CLES This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful XE led GUC aielas)) interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: PY322100556 Gorm Gorm http://orbilogin. 3 smn For indoor use only ESSE password) NETGEAR, INC. } Input: 12V == 3.5A Made in Vietnam |_admin 13991-01

Brand: NETGEAR Model name: RBR860, RBS860 FCC ID: PY322100556 IC: 4054A-22100556 EUT Bottom of the EUT:

Label location

NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this Date: 2022-06-23 FCC ID: PY322100556 To the attention of Federal Communications Commission Authorization and Evaluation Division outlined below:

Schematics Block Diagram Operational Description Software Operational Description application. Sincerely yours,

David Kay, Regulatory Compliance Director Tel: 4088903160 Fax: 4089078097 E-mail: david.kay@netgear.com

NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA Date: 2022-06-23 FCC ID: PY322100556 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the commissions rules, we request short-term confidential treatment for the following information until 180 days in order to ensure sensitive business information remains confidential until the actual marketing of the device:

External photos Test Setup photos Users manual Internal Photos Sincerely yours,

David Kay, Regulatory Compliance Director NETGEAR, INC. Tel: 4088903160 Fax: 4089078097 E-mail: david.kay@netgear.com

NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA Date: 2022-06-23 FCC ID: PY322100556 A U T H O R I Z A T I O N L E T T E R To Whom It May Concern:

NETGEAR, INC. hereby authorizes Trista Tsai / Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan), to act on its behalf in all matters relating to the Federal Communication Commission (FCC) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Trista Tsai /

Specialist of BV CPS Taoyuan on Netgear Incorporateds behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please dont hesitate to contact us. Sincerely yours,

David Kay, Regulatory Compliance Director NETGEAR, INC. Tel: 4088903160 Fax: 4089078097 E-mail: david.kay@netgear.com

NETGEAR, INC. 350 East Plumeria Drive, San Jose, CA 95134, USA Date: June 23, 2022 We, NETGEAR, INC. declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non-US channels in all the operational mode(s) for the following product. FCC ID: PY322100556 If you should have any question(s) regarding this declaration, please dont hesitate to contact us. Thank you!

David Kay, Regulatory Compliance Director NETGEAR, INC. Tel: 4088903160 Fax: 4089078097 E-mail: david.kay@netgear.com