FCC ID: T58WF2419D 300Mbps Wireless N Router

R netis Wireless N Router Quick Installation Guide FCC Caution:

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC RF Radiation Exposure Statement:

1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment. 3. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. 1.Package Contents netis Wireless N Router Quick Installation Guide netis Wireless N Router Quick Installation Guide Wireless N Router Power Adapter Ethernet Cable QIG

*This QIG is for all netis 300Mbps Wireless N Router, including models- WF2419/3001473

* The product model shown in this QIG is WF2419, as an example. 2.Hardware Connection xDSL/Cable Modem LINE IN POWER Notebook with wireless network adapter POWER CABLE 5 CABLE Computer with wired network adapter 2.1. Power off your Modem. 2.2. Connect the WAN port on netis Router to the Modem's LAN port with an Ethernet cable. 2.3. Connect your computer to one of the LAN ports on netis Router with an Ethernet cable. 2.4. Power on your Modem. 2.5. Plug the provided Power Adapter into the PWR jack of netis Router and the other end to a standard electrical socket. Then wait for one minute. 1 netis Wireless N Router Quick Installation Guide 3.Configure the Router via Web Management Page 3.1. Set the IP address of the wired network adapter on your computer asAutomatic or DHCP. For Windows 8/ 7/Vista 1) Go to Settings (Win 8)/ Start (Win 7/Vista)> Control Panel. 2) Left-click on Network and Internet> Network and Sharing Center> Change adapter settings (Win 8/7)/ Manage network connections (Win Vista). 3) Right-click on Local Area Connection and left-click on Properties. 4) Double-click on Internet Protocol Version 4 (TCP/IPv4). 5) Select Obtain an IP address automatically and Obtain DNS server address automatically then left-click on OK. For Windows XP/2000 1) Go to Start> Control Panel. 2) Left-click on Network and Internet Connections> Network Connections. 3) Right-click on Local Area Connection and left-click on Properties. 4) Double-click on Internet Protocol (TCP/IP). 5) Select Obtain an IP address automatically and Obtain DNS server address automatically then left-click on OK. For MAC OS 1) Click on the Apple menu> System Preferences. 2) Click on the Network icon. 3) Click on Ethernet in the left side box and click on Advanced in the lower right corner. 4) In the top options, select TCP/IP. 5) In the pull-down menu next to Configure IPv4, select Using DHCP. 6) Click OK then Apply. 3.2. Open your browser and type web management page. http://netis.cc in the address field to visit router's http://netis.cc 2 netis Wireless N Router Quick Installation Guide 3. 3. Select the language as you need on the top box,default is in English. 1) In Quick Setup page, select your Internet Connection Type. If DHCP (Cable Modem) is selected, the router will automatically receive the IP parameters from your ISP (Internet Service Provider). If Static IP is selected, please enter the IP Address/Subnet Mask/Default Gateway/DNS Servers given by your ISP. If PPPoE is selected, please enter the Username and Password given by your ISP. 2) Under Wireless Setup, configure your wireless network name (SSID) and password. 3) Left-click on Save to make your settings take effect. Tip 1:

Default address: http://netis.cc Default SSID: netis_XXXXXX Default wireless password: password

(XXXXXX: Last 6 digits of LAN MAC Address) Tip 2:

You can click on button on the top for other Internet connection types and further settings. 3 netis Wireless N Router Quick Installation Guide 4.Troubleshooting Q A How do I restore my netis Router's configuration to its default settings?

With the router powered on, use a pin to press and hold the Default button on the rear panel for 8 to 10 seconds before releasing it. The router will reboot and all configurations are back to factory default. Q A What can I do if my Internet cannot be accessed?

1) Check to verify the hardware connections are correct. Please refer to the Hardware Connection step. 2) Login to netis Router's web management page and ensure that you set the correct Internet Connection Type. For cable modem users, please configure MAC Clone additionally. On the left-side menu, left-click on > Network> WAN. And in the middle page, left-click on Advanced> MAC Clone and then Save it. 3) Reboot the modem first and then netis Router. Wait for one minute before you check the Internet again. 4) If Internet access is not available, please connect your computer directly to your modem and try the Internet again. If the Internet is still not working, please contact your ISP for further help. Technical Support:support@netis-systems.com NETIS SYSTEMS CO., LTD. www.netis-systems.com MADE IN CHINA 4 4

Differences Declaration To whom concern, We company NETIS SYSTEMS CO., LTD.Here by declares:

The product model(s) WF2419 are the same PCB layout, electronic schematic and Antenna with 3001473, which tested in Shenzhen Huatongwei International Inspection Co., Ltd. They are the same model that has 2 names. Sincerely yours, Name (in print):

Company name: NETIS SYSTEMS CO., LTD. Company address: Floor 8, Building B, TongFang Information Harbor, No.11 Langshan Road, Nanshan District, Shenzhen, China Tel: +86 0755-86186777 E-Mail: wangay@netcoretec.com

NETIS SYSTEMS CO., LTD. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2020-01-06 Subject; Request for Long Term Confidentiality FCC ID: T58WF2419D To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Kinki Wang Title: Manager

NETIS SYSTEMS CO., LTD. Letter of Authorization Company:

Address: Floor 8, Building B, TongFang Information Harbor, No.11 Langshan NETIS SYSTEMS CO., LTD. Road, Nanshan District, Shenzhen, China Product Name: 300Mbps Wireless N Router Model Number: WF2419, 3001473 FCC Identifier: T58WF2419D We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Kinki Wang Title: Manager Signature:

Date: 2020-01-06