FCC ID: YIG-OT-BC003-PU Baby monitor

5.5 Full HD 1080p Baby Monitor User Guide ASIA PACIFIC E-mail: support.jp@sunvalley.co.jp Tel: 03-5542-023810-18/

JP Importer: SUNVALLEY JAPAN Address: 104-003218-6 PMOF EUROPE E-mail: europe@sunvalley-group.de EU Importer: ZBT International Trading GmbH Address: Halstenbeker Weg 98C, 25462 Rellingen, Deutschland NORTH AMERICA E-mail: support@vava.com Tel: 1-888-456-8468 (Monday-Friday: 9:00 17:00 PST) US Distributor: SUNVALLEYTEK INTERNATIONAL INC. Address: 46724 Lakeview Blvd, Fremont, CA 94538 MANUFACTURER Shenzhen NearbyExpress Technology Development Co.,Ltd. Address: 333 Bulong Road, Shenzhen, China, 518129 Learn more about the EU Declaration of Conformity: www.vava.com MADE IN CHINA CONTENTS SAFETY INSTRUCTIONS CAUTION PACKAGE CONTENTS PRODUCT DIAGRAM GETTING STARTED 1. Charging & Powering Baby Monitor 2. Powering Camera 3. Pairing The Baby Monitor & The Camera 4. Placing The Camera 5. Wall Mounting Camera 6. Wide-angle Lens (Optional) FUNCTIONS & OPERATIONS Monitor Interface Overview 1. Monitor Settings 2. Add / View / Delete A Camera 3. Digital Zoom & Circulating 4. Pan-n-tilt 5. Volume Adjustment 6. Night Vision 7. Alarm 8. Talkback 9. Wide-angle Viewing (Optional) 10. Temperature Alert SPECIFICATIONS TROUBLESHOOTING FCC STATEMENT IC STATEMENT 01 01 02 03 05 05 05 05 06 06 07 08 08 09 10 10 11 11 11 11 12 12 12 13 15 17 18 SAFETY INSTRUCTIONS 3ft Keep cord out of the reach of children (more than 3ft / 0.9m away) in case of STRANGULATION. NEVER place the camera or cord in or near the crib or playpen. NEVER mount the camera directly above the crib or playpen to avoid the risk of injury. Only use the AC adapters provided. Never use the unit near water, including near a bathtub, sink, laundry machine tube, wet basement, etc. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices that produce heat. Only use attachments and accessories specified by the manufacturer. Unplug this device when unused for long periods of time. Do not insert anything into the upgrade pinholes. This operation is only intended for professionals. This product is NOT intended to replace the proper supervision of children. You MUST check your childs activity regularly. This product is not intended for use as a medical camera and its use should not replace adult supervision. Unplug the product during lightning storms. Please check the operating range and condition of the camera carefully at the initial installation, and on a regular basis after that. Check the reception regularly. Test the camera before use and after changing the cameras location. For indoor use only. Clean the camera with a dry cloth only. Do not block any ventilation openings. Microphone feedback might occur when the monitor is too close to the camera. Please keep them at least 1.5m / 4.9ft apart. PACKAGE CONTENTS CAUTION NOT toys. Do not allow children to play with them. The lens and lens hood are small parts, keep them out of your babys reach at all times. 01 Baby Monitor & Camera (Model: VA-IH006) Monitor Adapter with USB-C Charging Cable Camera Adapter USB-C Charging Cable Quick Start Guide User Guide User Guide Quick Start Guide 02 PRODUCT DIAGRAM Baby Monitor Camera 1 2 3 1 2 MENU ZOOM OK TALK SHORT CUT MIC 3 4 5 6 7 8 9 10 11 12 13 14 15 17 18 16 RESET 1 2 3 4 5 6 7 8 9 Antenna USB-C Port On/Off Button Menu Button Power Indicator Charging Indicator Zoom Button Left Button Up Button 10 11 12 13 14 15 16 17 18 Right Button OK Button Down Button Talk Button Power Button Short Cut Back Stand Speaker Reset Pinhole 4 5 6 7 8 1 2 3 4 Camera Antenna Camera Vents Lens Mounting Hole 5 6 7 8 Reset Pinhole Temperature Sensor Speaker USB-C Charging Cable 03 04 4. Placing the Camera Place the camera 1.5-2m / 4.9-6.6ft away from your baby for safety reason and for a better view when in night vision mode. 1.5-2m / 4.9-6.6ft 5. Wall Mounting Camera 1) Select the spot to mount the camera, keeping it beyond your babys 2) Insert the screw (not included) pre-installed on wall into the mounting reach. hole of the camera. GETTING STARTED 1. Charging & Powering Baby Monitor 1) Connect the monitor adapter to the monitor and a power outlet. 2) Unplug the unit when its power indicator turns off, indicating a full 3) Press the Power button on the monitor to power on with the power charge. indicator lighting green. 2. Powering Camera Connect the camera to power source via the USB-C Charging Cable and camera adapter. Only use the power adapters included in the package. Do not place the camera and power cord within the reach of your baby. 3. Pairing the Baby Monitor & the Camera By default, one camera has been paired with the monitor when manufactured. When you power on the monitor and camera, the two will automatically pair. To add more cameras, press the Pair Button at the bottom of the camera, press Menu button, select through > > , and then the monitor will auto-pair with the camera. Once theyre paired successfully, the camera number with icon will be shown at the top left. Microphone feedback might occur when the monitor is too close to the camera. Please keep them at least 1.5m / 4.9ft apart. It is recommended to pair in the baby's room, or wherever you intend to place the camera. 05 06 Its strongly recommended to use a screw and screw anchor. Dont release the camera until youre sure it is firmly mounted. FUNCTIONS & OPERATIONS Monitor Interface Overview Top Status Indications Signal 4 levels Current Camera Camera 1 / Camera 2 Zoom 2X / 4X Current Temperature C / F Night Vision Auto ON in a dim environment Current Time Alarm Mute Talk-back Battery AM / PM ON / OFF ON / OFF 5 levels Mute all system sounds 07 Bottom Menu Brief Add Camera Max. 2 cameras View Camera Select to view each at a time Delete Camera Select to delete cameras Speaker Volume 0-6 levels (mute when its 0) Brightness Camera Alarm Settings 1-7 levels To add / view / delete cameras OFF / 2Hr / 4Hr /6Hr / Set Time

(hour / minute / AM, PM) Time System sound volume Temperature scale Auto-sleep time Restore to factory setting Customer service contacts Time setting: Set the current time by setting hour, minute, and System sound volume: Select between Low, High, and Mute. Temperature scale: Select between C and F. Screen auto-sleep time: Select between 1min, 2min, 5min, and 1. Monitor Settings Press Menu Button, Left and Right Buttons, and then OK Button to set the monitor:

1) AM/ PM. 2) 3) 4) OFF. 5) Restore to factory settings: Press OK Button to confirm resetting;

Restoring factory settings will be shown when restoring, and you cant press any button to control the device during this period. The monitor will auto restart when its done. 6) address for customer service. Customer service contacts: Check the email, Tel. number, and 08 To mute the sound during poor monitor-camera connection, please set the system sound volume to mute. When the monitor screen is under sleep mode, the power indicator flashes green slowly while the audio is still on; press any button to awake. You can also short press the Power Button to turn the screen off. Press and hold the Power Button to power on / off the monitor. 2. Add / View / Delete a Camera 1) Press Menu button, select through > > to add a camera. 2) Select through > to view a camera. 3) Select through > to delete a camera. You can switch viewing different cameras; the current camera number will be shown with the Camera icon on the monitor. You can only select one camera to view at one time. 3. Digital Zoom & Circulating Press Zoom Button to zoom in to 2X / 4X when viewing the camera. A third pressing of the button will restore to the original image. Press and hold OK Button 4 seconds to start auto circulating, press OK again to stop. The current zoom level number will be shown with the Zoom icon on the monitor. 4. Pan-n-Tilt When viewing the camera, press Left / Right / Up / Down Button to view at different angles, 38 degrees vertically and 169 degrees horizontally. 5. Volume Adjustment Press Menu Button -> OK Button -> Left / Right Button to volume down /

up, and OK Button to saving your settings. For system sound adjustment, please go to Monitor Settings >

System sound volume . 6. Night Vision The night vision is automatically activated in a dim environment. The camera has 12 high-intensity infrared LEDs for picking up clear images in the dark. Black and white images can be captured within 2m distance. 7. Alarm Press Menu Button > Right Button to locate Alarm menu > OK Button >

Up / Down Button to select the timer setting. You can set a 2Hr, 4Hr or 6Hr alarm, or set the hour and minute otherwise. When the alarm time is reached, a beep will be heard. Press OK Button to stop; otherwise itll keep beeping for 30s, beeping again in 1min, stops after its alerted 3 times. When the timer is set, the Alarm icon will be shown on the monitor. Before setting, please check that the monitor time is your current time. 09 10 8. Talkback Press and hold Talk Button to talk to your baby, release it to exit the talking mode. SPECIFICATIONS Monitor When you enter the talking mode, the icon will be shown on the monitor. When its mute or the speaker volume is too low, you may not be able to hear the baby. When youre pressing the Talk Button, the camera will not transfer the sound to the monitor. Please release the button to listen to your baby. 9. Temperature Alert The monitor will prompt too high (>35C / 95F) and too low (<0C /

32F) temperatures with the HH and LL icon, accompanied with a

& icon and a beep alert. When the monitor is mute, you may not be able to hear the baby. Image Compression h.264 (frame rate = 18fs) Operating Range 280 - 300m (antenna vertically positioned at 90) Model Sonix IC Resolution Connectivity Image Aspect Temperature Alert Volume Control Brightness Antenna Power Input Zoom Two-Way Talk Multi-Camera OT-BC003-PU SN93700 IPS (1920 x 1080), PPI=293 2.4GHz FHD 1080 Yes 7 levels 7 levels Rotatable (max. 90 degree) 5V / 2A (1.5m long USB C cable) Zoom In (2X) Zoom In (4X) Yes Max. 2 cameras Storage Temperature

-10C ~ 55C / 14 - 131F Operation Temperature 0C ~ 40C / 32 - 104 F 11 12 1080p (1980x1080), 3.0M, 1/4"

Connectivity 2.4GHz Image Compression h.264 (frame rate = 18fs) Product not powering on?

Camera Cmos Power Input Pan-n-Tilt Zoom Night Vision IR LED Light Sensor Two-Way Talk 5V / 2A, 2.5m-long USB-C Charging Cable 38 degrees vertical (Up=90, Down=18) 169 degrees horizontal (Left=135, Right=135) Zoom In (2X) Zoom In (4X) Yes Yes Storage Temperature

-10C ~ 55C / 14 - 131F Operation Temperature 0C ~ 40C / 32 - 104 F Lens Focal Length 1.5m to infinity Black & White image, up to 2m clear range Non-visible IR LED with wavelength 940nm (x 12 pcs) Baby monitor cant connect with the camera?

TROUBLESHOOTING Check that the camera and monitor are turned on. Check the camera is connected to power properly (it cannot be charged; its power off once disconnected from power). Check that the monitor is of enough battery (itll auto shut off when battery level icon flashes red slowly on the monitor). Check whether the camera is near the monitor (recom-

mended to keep within 1.5-2m / 4.9-6.6ft). Check whether the monitor is of low battery. Charge it in time to restore good connection. Check whether the camera is well connected to power. Check whether there are any large metallic objects including doors, refrigerators, mirrors, etc., are placed between the camera and monitor thus blocking the radio signals. Check whether theres any other 2.4GHz product is used nearby like WiFi routers, microwave ovens, which may interfere the connection. If nothing above is involved, please retry to pair:

Press and hold the OK button on monitor to enter pairing mode, and the monitor will connect with the camera nearby automatically. Check all connections to the camera (power cable plugging and pairing). Check whether the screen is in sleep mode. Press any button to awake it. Check whether the camera is within range of the monitor. Adjust the monitor antenna to vertical position for better signal transfer. Nothing shown when I view a camera?

13 14 No sound from the monitor?

Check whether the system sound volume is set High or Low. Itll be mute if set so. Black and white pictures?

Night vision LED may be ON. Please turn on room lights to force it out of the night mode. Choppy videos?

Check whether the camera is near the monitor and that therere no obstacles between them. Adjust the monitor antenna to vertical position for better signal transfer. Too much noise?

Volume may be set too high. Press Menu Button -> OK Button -> Left Button to volume down. The camera and monitor may be put too close; keep them at least 1.5m / 4.9ft apart. The camera may be too out of range. Please keep it within 10m / 32.8ft to the monitor. FCC STATEMENT changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 15 16 FCC 20cm Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IC STATEMENT This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. L'metteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR d'Innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :

1) L'appareil ne doit pas produire de brouillage;

2) L'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'valuation dans la section 2.5 de RSS 102 etla conformit l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne surl'exposition et la conformit de rf. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Cet metteur ne doit pas tre Co-plac ou ne fonctionnant en mme temps qu'aucune autre antenne oumetteur. Cet quipement devrait tre install et actionn avec une distance minimum de 20 centimtres entre le radiateur et votre corps. 17 18 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment The devices has been evaluated to meet general RF exposure requirement the device can be used in portable exposure condition without restriction

C5266091_X10_Ed.2 NETOP INDUSTRIAL CO., LTD. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC ID: YIG-OT-BC003-PU To Whom It May Concern, Date:30 May, 2022 Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No Short-Term Confidentiality NOTE 2 No No NOTE 1 NOTE 1 No No No No No No No No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. 1/1 C5266091_X10_Ed.2 In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Andy Wu Title:Director 1/1

C5266091_X8_Ed.1 NETOP INDUSTRIAL CO., LTD. Letter of Authorization Company:NETOP INDUSTRIAL CO., LTD. Address:Dapu Industrial Zone, gangzi Village,Changping Town Dongguan City, Guangdong Product Name:Baby monitor Model Number:OT-BC003-PU FCC Identifier:YIG-OT-BC003-PU We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. is allowed to forward all Name:Andy Wu Date: 30 May, 2022 Title:Director Signature of applicant:

1/1