User manual 4ch AHD SD Mobile DVR USER MANUAL Version 1.0 User manual Introduction The manual is about the features and specifications of one kind of car DVR, it is an integration of 4 monitoring and recording , Million Pixels Digital&Analog mixed car DVR, wireless data transmission . In the manual it describes the functions and considerations of the modules ,the connector signal definitions in the back panel, the interface definition and users operations.More details,please check following directory. State:
This manual may exist any technical describe inaccurate or misprint,also the contents will be update unscheduled without notice,new contents will be added in next version;
Were subject to improve or update product description or program,if any difference,all depend on real goods,please understand. 1 Parts list No Name MDVR Remote Control Keys WIFI antenna 1 2 3 4 Quantit y 1 1 2 1 Unit set pcs pcs pcs Device Type Basic Basic+WIFI Remark Optional User manual 2 Product introduction 2.1 Product features H.264 Compression Mode, Support 4CH real-time 1080P Million Pixels AHD input and Analog Standard Definition camera input, or 2CH HD input + 2CH SD input; Exclusive pre-allocate DVR Special File System Technology,Solving repeatedly wipe cause file fragmentation, solving SD card file system collapse, data loss and cannot find SD card and file garbled, ensure the integrity of the data. 8-33V Adaptive Wide Voltage input, Super Low Power Consumption Design; SD card storage
(maximum support two pieces 128GB SD card. ) It can be completely resist car Vibration,Dust and others cause data corruption; Support GPS/BD/G-SENSOR ; High Reliability Aviation plugs,High Cost Performance with reliable stability,simple and clear operation menu . HIS Solution,H.264 Compression Mode, Many stream recording,4CH Video+2CH Audio Input, Compatible with 4CH 1080P/720P Mega Pixels Analog High Definition Camera input /2CH AHD High Definition + 2CH Standard Definition mixed input / 4CH Analog Standard Definition Camera input. Real-time HD Video Recording, 1080P/D1/HD1/CIF for Optional,Adjustable Frame Rate Quality. Professional Power Design for all kinds of Vehicles, 8-36V DC; Wide Voltage, Over-load,Over-voltage,Short Circuit,Reverse Protection,Suitable for all kinds of vehicles. Support DC 12V/2.5Amp output, it can offer power for cameras,mini monitor and some peripheral device. SD card Data record storage (maximum support 128GB SD card. ) It can be completely resist car Vibration,Dust and others cause data corruption;
Watchdog Abnormal will trigger Restart Protection Function . It can better protect Device and Video. Exclusive pre-allocate DVR Special File System Technology,Solving repeatedly wipe cause file fragmentation, and ensure the integrity of the data. By accidents power-off protection function.Unique UPS Technology ensures the integrality of record when power failure occurs,even can for 10-15s. Flame out Time-lapse Video Recording Function ( Highest support long delay time 24 hours.) Auto Recording,Time Recording,Alarming Recording Modes for Different Request. Display vehicle traffic status, Vehicle numbers ,Route, Super-low speed vehicle Information, Convenient management.. Support WIFI connection All Aviation plugs, Super stable, High Anti-shock,Easy installation Plug in and out. Unique WINDOWS 8 interface, Easily Smart GUI Interface, Fluent system interface is intuitive and perfect. Support SD card Remote Software Upgrade/OTA remote upgrade automatically, partition backup technology upgrade don't crash. Can be batch functional customization according to customer's requirements;
User manual 2.2 Main Functions Main Sub-Item Instructions Video Channel 4Channel video + 4Channel Audio recording synchronously Resolution Support 4*1080P(1280*1080),4*D1(704*576),4*HD1(704*288), 4*CIF 352*288Each channel is individually adjustable. Image Quality 0-7 levels, 0 is the highest level. Recording Sub-System OSD Overlays information such as date time and vehicle ID Loop Rec Support SD card loop recording, loop cover previous video Record Mode Preview Disk overwritten Timed recording, alarm trigger recording and manual recording Support 1 channel and 4 channels preview. Support enlarge video image when alarm trigger and video rear view trigger Space pre-allocated Support disks overwritten function. Video Search Search video files anytime per day, type(n/a) Playback System Support 1 to 4 channels playback. Playback Support forward and backward play at the speed of: x2 ,x4,x8,x16. Support alarm spot search and time search. GUI Graphical User Interface Setup system parameters with the remote control. Optional Network Can expand WIFI module,support 801.2b/g/n, 801.2a/c ON/OFF System delay-time power on/off;
File System DVR special file recording System Technology,Exclusive car record file system,space pre-allocate,4ch single file Record,cyclic coveringTo avoid the storage of the media causes file fragments, with high reliability and high stability Others 2.3 Parameter Sheet Item OS Linux Parameter Language Chinese/English/Others (can be customized) Video Compression H.264 Compression Mode OSD Overlays information such as date time and vehicle ID Graphical User Can connect to external LED screen. Setup system parameters with the remote Interface control. Video Input 4CH 1080P AHD/ 4CH standard definition /2CH high definition+2CH standard definition mixed video input ,aviation plug. Video Output 1CH CVBS GUI S y s t e m R e c o r d V i d e o User manual Preview Support 1 channel and 4 channels preview.,Support Manual/Alarm Trigger full screen preview Resolution 1080P/D1/HD1/CIF, MAX:4 channels of 1080P Video Quality 0-7 levels, 0 is the highest level, 7 is the lowest level. PAL: 100f/s , CCIR625 line,50field;
NTSC: 120f/s, CCIR525 line,60field;
CIF: 256Kbps ~ 1.5Mbps, multi levels video quality optional;
Video Standard HD1: 600Kbps ~ 2.5Mbps, multi levels video quality optional;
D1: 800Kbps ~ 3Mbps, multi levels video quality optional;
720P : 1Mbps~4Mbps, multi levels video quality optional;
1080P: multi levels video quality optional;
Record Mode The default setting is auto recording after power on. Timed recording, alarm trigger recording and manual recording are supported. Audio Input 4CH ,Aviation Plug Audio Compression G.726 compression, 8KB/s speed Wireless transfer Support Built-in/External WIFI G-Sensor Support G-sensor(Optonal) Storage 1pieces SD Card,each max 128GB SD Card, Upgrade Support USB flash disk updating,SD card upgrade , OTA remote upgrade automatically File Format H.264 General video format Video Storage USB Front panel supports USB port, support USB flash disk upgrade to backup; hard disk box USB port, can back up video data Video Search Search video by Record Time/Record Type etc Video Playback Playback Max support 4CH Replay /Stop/Fast Forward/Fast Reverse at same time Support x 2,x4,x8,x16. fast forward or fast backward play Safety Management User/Admin 2 Levels Different Passwords , support screen lock Power Management Adaptive wide power input, support Wide Voltage, Over-loadOver-voltage Short CircuitReverse Protection..Support Time Setting/Delay power off Voltage &
Power Consumpti on Working Environme nt Voltage Input DC:+10V ~ +33V Voltage Output
+12V@2A Power-off UPS Technology,All video information can be saved automatically when the Protection power is cut off, and make sure that all the files can not be damaged. Power Consumption Normal Working 5W Stand-by Status 0.5W Temperature
-20 to +70 Humidity 20% to 80%
***** Above parameters any changes,please refer to actual product *****
User manual 2.4 Front Panel
** Status LED will alternate loop flash when device power on, it will quick loop flash when device is upgrading **
2.5 4CH MDVR Back Panel 1 Video inputch1 to ch4 2 Power input 3 WIFI 5 RJ45 4 Video output 4CH MDVR Back Panel items introduction Item Name Silk screen Functional Specification 1 2 Video&Audio Input interface Power Input interface IN1-IN 4 1-4Channels, with DC 12V output, POWER Input Voltage DC 8-33V, User manual 3 WIFI Antenna Port WIFI 4 5 Video&Audio Output interface AV OUT Video&Audio output interface, with DC 12V output RJ45 RJ45 Its used for connecting network cables The 4CH MDVR support channel AV1~ AV4, its Video&Audio Input interface use 4 Pin aviation plug, PIN DESCRIPTION 4 Pin aviation plug PIN FUNCTION 1 2 3 4
+12V GND Audio Input/output Video Input/output Power cable pin definitions Color Line Red Name DC+
Description Power-Positive User manual Black Yellow Red DC-
ACC GND ACC 12V-OUT 12V output Wiring: red and black wire are connected directly to the car battery. Red wire to positive, black to negative. Yellow line contacts FireWire, ignition switch mode is set to mode. The DVR device turns on when the vehicle power on,DVR turn off automatically the vehicle power off. Yellow line connected to the car keys to open the position (that is, before the automobile starter motor gear) all the dashboard lights. Note: 1) Before connecting wires,one need to make sure the battery voltage is between 6V ~
36VUU, otherwise it will be burned;
2) After connecting the cable, pay attention to insulation of the line between lines to prevent short circuit and burned out the battery;
3) yellow line must be connected to the firing line, otherwise the device will not support the ignition switch;
4) Special Note: 12V-OUT line can not be connected to the power input by mistake, which can not be connected to ground by mistake;
5) Note: DVR installation must be connected to battery positive and negative directly, can not be done with ground grounding, grounding will produce negative glitch host running. Positive and negative power supply line diameter must be 1.5 above. User manual 2.6 Remote Control System Key
: Turn on/ off key Info: Info. Key (retain)
:Lock. Press this key to lock remote input after exiting menu.
: Switch 1~4 screens. Number keys 1~4 can do this too. User manual Del:Delete key. Number/LetterInput key, you can input the number value to select a single channel preview. Menu-key Function Description MENUStart/Login/Exit menu EXITBack to the previous menu Last program Next program Modify the current item/last subproject Modify the current item/next subproject OKConfirm Play Keys
:Play/Pause
: Stop
:Fast forward. 1/2/4/8/60
: Rewind. 1/2/4/8/60 Frame forward User manual 3 Device Installation 3.1 Power Cable Connection This MDVR use DC power supply, Wide operating range 10 to 33V Use ignition switch to control video record delay time working Red wire connect positive of the car battery, black wire connect negative,while yellow wire connect independent ignition switch or independent positive. Do not use ignition switch to control video record delay time working(Office Test also using this mode) The red and yellow wire connect together to connect the battery positive,Black wire to connect the battery negative . Attention 1. The recorder is DC power supply; please attention the positive and negative polar. 2. The voltage is 8V~36V.Do not insert voltage that beyond this range. Under low voltage the recorder doesnt work, under high voltage will be harm to the recorder. 3. Please make sure the recorder is connect with the car power directly. Do not connect with the generator, the instantaneous voltage will harm to the recorder. 4. The initial power will beyond 30W when the DVR connect with the Camera (the consumed power is different due to the connect with different device), the power supply must beyond 30W. 5. The power cables must can stand beyond 60W.(For example, when the output voltage of car is 12V,the power cables must can bear 5A or more). 6. Please put the cover on the cables, the cover must be wear-resistant, heat-resistant, water-proof, grease-proof, in case of short circuit and open circuit. 7. Please install a 10A fuse box near the battery output positive polar for fear of the short circuit will damage the power supply. 4 Operation Interface Setup 4.1 User Loading When the password switch is set to Off: The host start and press [OK] key, will direct access to the main menu.. When the password switch is set to On: Move the cursor to landing column, Press [OK] key, then can enter the main menu. User manual
**********************************************************************************
The administrator default password is 111111(or device number before changed the password available);
User default password is 000000, only have query permissions;
**********************************************************************************
4.2 System Main Menu The main menu includes: Search, System setup, Rec setup, Network setup, Alarm setup and Peripheral, System Information, as below:
4.3 Search Query menu includes: Record, Log and Picture, User manual 2.1.1 Video Search
**** Green color display indicates current day and time exist video file ****
Search Date: Press the number key to enter date, default is current date. Start Time: Press the number key to enter date, default is 00:00. End Time: Press the number key to enter date, default is 23:59. Record Type: Press the [OK] button to select the query type: All videos \Alarm recording. Default is All videos. Storage Media: Press the [OK] button to select: all disks, disk 1, disk 2. Search:Move the cursor to Search button, press the [OK] key to enter the search results interface. User manual Press the arrow keys to select the video you want, press the keys to quickly flip, press to turn to first page or last page, press the play button to play the video, press [ESC] key to return to the previous menu Press the arrow keys to select Home, Previous, Next, Last and press [OK] button to display the next page information. 2.1.2 Log Query This menu is to query device operation and working log , you can choose the same type log via log categories. When select a single log, press the keys to quickly flip over, and press to turn to first page or last page. 2.1.3 Picture Search This menu is mainly for searching the screenshot pictures. User manual Zoom up single full screen will auto screen capture by default , it will be triggered by the alarm linkage or manually operate.
**** Pictures and device log all save in the second partition ****
4.4 System Setup Under System Setup menu includes: Power, time setup, user setup, terminal setup (menu setup and modifying need to choose save to take effect) User manual 2.4.1 Terminal Setup By remote control input settings: device number, phone number, license plate number, the provincial domain ID, the City ID, terminal type, manufacturer ID, terminal ID, the device management (data in accordance with the Department of standards, Chinese input can use the soft keyboard input) 2.4.2 User Management Password Enable: You can enable or disable password authentication to access the menu. Modify or setup password of users and the administrator by remote control.
**** ADMIN Pass : 111111, USER Pass : 000000 ****
2.4.3 Time Set This menu is to setup device parameters, such as date and time, etc. User manual Date Type: Different date format for choosing. Date: Press the number keys to enter current date. Time Synchronization: calibration mode: GPS, NTP and other school models available. Time Zone: Setup the time zone of the location of the device Timeout: optional remote control does not operate the exit time Real Time: Press the number key to enter the current time 2.4.4 Power Management This menu is to setup Power management modes and power distribution. Power mode:press the number keys to select the type, the default is ignition mode. Delay Off: Press the number keys to enter the time, the default is 5 minutes, can be set to 1440 minutes Screen time: Press the number keys to enter the time, the default is 60 minutes, can be set to 0-1440 minutes Power On: Press the number key to enter time, setup the timer start time Power Off: Press the number key to enter time, setup the timer off time User manual 2.4.5 Parameters Management Import:Import parameters from HDD or SD Card to current device.Import the system configuration parameters which has set up and restore the factory settings to the factory states Export:Export current device parameters to HDD or SD Card;
Default:Default to factory setting; This operation will clear all the setting on the device. If quantity Devices with same setting,please using Parameter Export/Import for configuration, after setting one device, export these parameters to U-Disk or SD Card then import to other rest devices to be fast setting. 2.4.6 FORMAT Format Disk choice, device will reboot disk after confirming, log and pictures and other related info will be reserved. Attention:
Device will format automatically when it starts, new SD card, can be formatted on the computer, in general, it doesnt need format disk in DVR by manual. User manual 2.5. REC Setup Recording setup menu includes: basic setup, Main stream, Sub stream, time recording, Storage management(configuration and modification must select Save to take effect) 2.5.1 Basic Setup This menu is to setup the basic video, audio and video parameters and can change into standard definition, AHD high definition and mixed mode. Video Type: PAL / NTSC, press [OK] key to select. Record Mode: Auto / timer / alarm recording, press [OK] key to select. Camera Type : Can switch the status of standard definition , high definition or mixed camera input. Resolution:Set the resolution of VGA output. Layout: optional: Single, 2-channel, 4 grids, nine grids and other video channel layout. Packket time:The time of a single record file. User manual Attention :
If the camera type and DVR setting mode(AHD HD/Analog/Mixture) dont match, then it will show video lost, In Mixture mode, 1,2CHANNEL is AHD high definition input, 3,4CHANNEL is analog standard definition input;
2.5.2 Main Stream This manual is to setup the code stream and definition of video channel. Enable: open or close the channel of pre-recording function, press [OK] key to select. Resolution: CIF, HD1, D1 and 1080P resolution for choosing, press [OK] key to select. FPS: 1-25 frame (P standard), 1-30 frame (N standard) channel recording frame rate for choosing. Image quality setup video quality under different resolution, 4-speed adjustable. Audio setup the audio recording on or off.
****************************************************************************************
According to the storage space and quality requirements, the resolution of each channel and stream can be configured individually
****************************************************************************************
2.5.3 Sub-stream This menu is used to set the parameters of the transmission stream. User manual Resolution Setup the transmission resolution, press [OK] key to enter. FPS Setup the transmission time frames, press [OK] key to enter. Image quality setup transmission quality grade, press [OK] key to enter.
****************************************************************************************
Sub-stream is the code stream which device upload via 3G/4G, high definition main code stream can be chose in the client-side platform
****************************************************************************************
2.5.4 Time Record Setup Setup the timer recording time periods, everyday can be set to two periods. Move the cursor to Timing Recording and press [OK] button to set up the following timing list.
****************************************************************************************
Timer recording start time is before the end time.
****************************************************************************************
User manual 2.5.5 Storage management pre-recorded: pre-recorded alarm recording time of 0-60 seconds to setup, press number keys to setup. Alarm delay: alarm delay recording time, 120-3600 seconds to set up, press number keys to setup. Alarm Fime: The storage time of alarm file, 3-45 days to set up, press number keys to setup. 2.6. Network Set Including: Center setup,Local Network , dialing setup,WIFI setup. 2.6.1 Center Setup Set Server IP and Port ;
User manual Monitoring Center:Set 3G /4G Video Center IP or domain,port information etc, Network Type:Set 3G network type, IP address/Domain optional;
Center IP:3G Server IP/Domain setup. Press right key to enter keyboard interface,input the numbers via remote controller,then press [OK] for setting,;
Port:Communication port between 3G device and Server,must be same with server configuration;
Remind In Info interface, W connected : it means device connected server already; B connected : it means device connected ministerial standard platform already, Connected : it means two platforms both connected device successfully. 2.6.2 Local Network Setup Device Local Network setup IP\Mask\Gateway\ DNS1 \DNS2\MAC:IP,Mask,Gateway,MAC setting for LAN network testing. Attention:
User manual When net cable directly connect to the device, only can use 4PIN definition net cable (please see more definition in the addenda), otherwise it will lead device dead. 2.6.3 WIFI Setup WIFI-EN:WIFI On/Off Setting,Press [OK] for choosing;
Encr-EN: WIFI encryption ON/Off Setting,press [OK] for choosing;
Au-Mode: WIFI Authentication mode setting,Please choose same one with your router, Enc-Type: WIFI Encryption type setting,Please choose the one same with your router, IP\Mask\Gateway:WIFI IP/Mask/Gateway setting SSID: Input Your WIFI SSID, PWD: Same with your WIFI password,
****************************************************************************************
According to the specific configuration of WIFI network environment, please pay attention to check the accuracy of the characters and the IP address. IP address set by WIFI and local network can not be in the same network segment.
****************************************************************************************
2.7. System Info System Info have 2 parts for detail information;can view by menu or Press INFO. User manual 20C