Warranty 7 Screen & Front Light Sengs 8 Cercates of the device Your new MobiScribe Origin comes with a one-year limited warranty against defects in materials and workmanship from the invoice date. For full warranty informaon please visit:
hps://www.mobiscribe.com/terms MobiScribe USA Contact Informaon Customer Service Email: Support@mobiscribe.com Store: www.mobiscribe.com Scan this QR Code to join the MobiScribe fans Facebook community. Contrast Threshold Frontlight ON MobiScribe and the MobiScribe logo are USPTO registered trademarks of TeamUC, Inc in the United States and/or other countries. Copyright 2020 TeamUC, Inc. All rights reserved. Path 1: Click the icon at the top right of the toolbar to directly enter the seng page. Path 2: Select Tools page -> Sengs -> Display ->
EPD display sengs. Select the icon to adjust the screen brightness. Select the icon to adjust the screen color temperature
(cold/warm). Select the icon to adjust the screen contrast. Select the icon to adjust the screen threshold Toggle right/le to turn on/o front light. EU Declaraon of Conformity This device complies with Direcve 2014/53/EU issued by the Commission of the European Community.
- Declaraon of Conformity Please added cercaon standard in your user manual which depended on the test standards your device performed. or
- If the DoC should be a simplied version, please take below as reference Hereby, TeamUC declares that the radio equipment type MobiScribe is in compliance with Direcve 2014/53/EU. The full text of the EU declaraon of conformity is available at the following internet address:
Manufacturer informaon:
Manufacturer: TeamUC Manufacturer Address: 1911 Hartog Drive, San Jose, CA 95131 SAR Limits This device has been tested and meets applicable limits for Radio Frequency (RF) exposure. The frequency and maximum transmied power in EU are listed as bellows:
2412 - 2472 MHz: 19.88 dBm Transfer Rate 802.11b: up to 11Mbps 802.11g: up to 54Mbps 802.11n: up to 300 Mbps The exposure standards for wireless devices employ a unit of measurement known as the Specic Absorpon Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. The SAR limit recommended by the Council of the European Union is 2.0 W/kg. This devices maximum SAR value is well below the FCC and EU limits with specic measurements shown in the below table. Device Model FCC 1g SAR Limit Highest Reported Body SAR Value E60P22 Device Model EU 10g SAR Limit Highest Reported Body (0 cm Gap) Value E60P22 0.84 1.00 2.0 1.6 USA - FCC Compliance Statement FCC ID: NOIKBE60P22 This device complies with Part 15 of the FCC Rules. Operaon is subject to the following two condions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operaon. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interfer-
ence in a residenal installaon. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instrucons, may cause harmful interference to radio communicaons. However, there is no guarantee that interference will not occur in a parcular installaon. If this equipment does cause harmful interference to radio or television recepon, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separaon between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Important: Changes or modicaons to this product not authorized by Kobo could void the EMC and wireless compliance and negate your authority to operate the product. This product has demonstrated EMC compliance under condions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions, and other electronic devices. FCC Cauon: Any changes or modicaons not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmier must not be co-located or operang in conjuncon with any other antenna or transmier. 61TC-E60P22+204 CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS Baery- CAUTION Use specied Charger only. Non-specied equipment use may cause malfuncons, electric shock or re due to baery leakage, overheang or bursng. The baery is embedded inside the product. Avoid removing the embedded baery since this may cause overheang or bursng. Do not dispose of the product with ordinary refuse. Take the product to a Shop, or follow the local disposal regulaons. Quick Start Guide 1 Your MobiScribe Origin box contents 2 MobiScribe Origin Features 3 MobiScribe Origin Power Specicaons 4 Stylus 5 MobiScribe Origin Touch Screen Operaon 6 WiFi Sengs & Soware Update Thank you for purchasing the MobiScribe EINK notepad. This product contains the following accessories in the box. If any items are missing, please contact our customer service department. MobiScribe Origin Stylus Type-C USB Cable Quick Guide Front light on/o switch Power buon Status light Factory reset Type-C USB port MicroSD slot Eraser Stylus nib ON Nx_Guest Connected AKIHABARA 2F_Test Site Charging: connect the supplied Type-C charging cable to the MobiScribe. The MobiScribe can be charged via a wall outlet
(USA power adapter is not included), or via a USB port. Power on/o cycle specicaons On: press the power buon for approximately 3 seconds, the status light will illuminate and ash unl the unit is fully powered on. The green status light will then shut o. O: press the power buon for approximately 3 seconds unl the shutdown conrmaon screen appears, then select Shutdown. Sleep Mode: Quickly press the power buon to enable unit sleep mode. To reawaken the device, quickly press the power buon again. Rell nibs and extractor tweezers are included with the MobiScribe. When the length of the nib is noceably shorter, it is me to replace. Nib rell replacement method. Step 1: Please use the supplied extractor tweezers to remove the nib from the stylus. Step 2: Insert the new rell nib into the stylus. You can use your nger or stylus to acvate the following applicaons and features on the Home Screen. Notes Books Calendar Tools Notes/ Books page, swipe down the page to open the toolbar, and click to return to the main screen. Books page, use your nger or stylus to maneuver le/right on the screen and turn pages forward/backward. Books can support les in MOBI/ PDF/ EPUB/ TXT format. Path 1: Click the icon at the top right of the toolbar to enter the funcon seng page. Paht2: Select Tools page -> Sengs to setup a WiFi connecon Enter the WiFi network details to enable it. Tap your WiFi link to connect. Update Soware Click "System Updates", and when you are connected to the Internet, click the "System Updates" opon to update the MobiScribe soware. Stylus Rell Nibs & Retracon Tweezers Memory Capacity Onboard 32GB memory capacity, and supports 32GB microSD memory card expansion. Environment Temperature Operaonal Temp: 0~ 45C (32~ 113F ) Storage Temp: 10~ 50 C (14~ 122F) Input Rang 5Vdc, 1A