• Model No: MW08
• FCC ID: 2AGA7MW08R
• FCC ID: 2AGA7MW08L
• his device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
IC: 20773-MW08
•
•
•
•
•
•
•
•
•
•
•
•
•
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-
exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique
Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
(1) L’appareil ne doit pas produire de brouillage;
(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
•
• RF Exposure Compliance
• This equipment complies with FCC/ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow
the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
• The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements
set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product
certification for use when properly worn on the body.
•
• Cet équipement est conforme aux limites d’exposition aux rayonnements FCC/ISED établies pour un environnement non contrôlé.
L’utilisateur final doit suivre les instructions spécifiques pour satisfaire les normes. Cet émetteur ne doit pas être co-implanté ou
fonctionner en conjonction avec toute autre antenne ou transmetteur.
•
Le dispositif portatif est conçu pour répondre aux exigences d’exposition aux ondes radio établie par le développement énergétique
DURABLE. Ces exigences un SAR limite de 1,6 W/kg en moyenne pour un gramme de tissu. La valeur SAR la plus élevée signalée en
vertu de cette norme lors de la certification de produit à utiliser lorsqu’il est correctement porté sur le corps.
Bluetooth: 2402MHz-2480MHz@ 11.1dBm; BLE: 2402MHz-2480MHz@8.06dBm
Charging case Input: 5V, 1,6A; output: 5V,0.5A;
Charging case working temperature: 15-45 degree
• CAUTION
explosion;
gas.
explosion.
gas.
• – Risk of explosion if the battery is replaced by an incorrect type
• – disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an
• – leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the
leakage of flammable liquid or gas;
• – a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an
• Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the
leakage of flammable liquid or gas.
• A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or