FCC ID: G6D1429UB TOY Receiver

ise eee OWNERS MANUAL Please read and understand all precautions prior to use. Thank you for choosing a premium New Bright product. USA & Canada 30-Day Limited Warranty New Bright Industries warrants to the original purchaser that this product will be free of defects in materials and workmanship for thirty (30) days from the date of purchase. In the event of such defect within the warranty period, New Bright will repair or replace the product at our sole discretion. This warranty does not cover damage resulting from unauthorized modifications, accident, misuse or abuse. Should your item have a defect covered under this warranty, first call the toll free number listed below. Most problems can be resolved in this manner. If necessary, you will be issued a Return Authorization number (RA) and instructions on how to obtain a Product Return Form. The Product Return Form is to be used when returning a product to us (postage pre-paid and insured by the consumer). When returning a defective product, please package the product, the Product Return Form and a copy of the dated sales receipt as proof of purchase. Be sure to mark the RA number on the Product Return Form. If the product is returned without a dated sales receipt, it will be excluded from coverage under this warranty. Please allow 4 to 6 weeks for delivery of repaired or replacement vehicles (depending on your location). New Bright Industries liability for defects in materials and workmanship under this warranty shall be limited to repair or replacement at our sole discretion. In no event shall we be responsible for incidental, consequential or contingent damages (except in those states that do not allow this exclusion or limitation). Valid only in the USA & Canada. Contact New Bright Industries Customer Service Toll Free at:

1-877-NBI-TOYS:

(1-877-624-8697) Monday through Friday, 8:00 AM to 5:00 PM Eastern Time REF-U92416 JN195-20 TRANSMITTER Battery Installation 1. Flip smart phone holder up to reveal battery compartment. 2. Press and slide in the direction of the arrow open battery compartment cover. Insert 2 AA size batteries. Make sure the positive (+) and negative

(~) markings on the batteries match the markings inside the Battery Compartment. Replace the Battery Compartment Cover making certain that the Compartment tab has snapped into the locked position. Note: When replacing Transmitter batteries Do not mix old and new batteries. Do not mix alkaline, standard or rechargeable batteries Use alkaline batteries only. CONTENTS Component Checklist

(1) RIC Vehicle With USB Cord

(1) Transmitter (2) AA Batteries TRANSMITTER Features and Functions Light Press once to turn on light. Press again to turn off. Smart Phone Holder ain Engine lights alway on. Left/Right Steering Forward/Reverse This transmitter is equipped with 2.4GHz technology which allows up to 6 vehicles to be raced at the same time. Once vehicle and transmitter batteries have been correctly installed and vehicle ON/OFF Switch is in the ON position, the transmitter will automatically sync with the vehicle. Smart Phone Holder Locate the Smart Phone Holder at the back of the transmitter. Flip forward into the upright position. Next, gently pull up on the clamp while sliding phone in. Release clamp when phone is in place. App Download Additional features and functions are available and require the user to download and install the App Driver app onto a smart device to access. No charge to download. Data rates may apply. POL eC Apple Users:

r App St Search New Bright App Driver in the App Store; Install. Android Users:

Search New Bright App Driver in Android Market or Google Play; Install. App Set Up 1. Install app to device. 2. Make certain the vehicle is fully charged (See charging instructions in Recharging the Vehicle). 3. Move ON/OFF switch to the ON position (See Vehicle Features for Switch location). Vehicle lights will turn on. 4. Launch the App Driver app on your smart device. 5. When launching, the app will ask to enable a connection with your device. Select yes to continue to use the app. This allows the app and your device to communicate with the vehicle. (If a proper connection has not been made, you will be prompted to repeat steps 2-4). 6. The vehicle and app are now communicating. 7. After a connection is established, you will be notified that the control range when using the app is limited. Use the included joystick controller when longer range is needed. The App features 4 ways to control your vehicle:

1. Select Drive Mode and choose Touch to control your vehicle using the touch screen or select Tilt'* to control your vehicle using the gyroscope sensor in your device. Music, sound and light controls are also available. See instructions in Using the App. 2. Selecting Draw Mode allows you to draw a path and have the vehicle travel along that path. Music, sound and light controls are also available. See instructions in Using the App. 3. Selecting Code Mode allows you to program each segment of the vehicle's path adding sounds, music, and controlling the lights along the way. See instructions in Using the App.

*Tilt Mode Setup:

1. After selecting Tilt Mode you will be prompted to set the desired Neutral or Stop position. When your device is held at this position, the car will not move. Placing the device on a flat surface is NOT recommended for this mode. Exit Tilt Mode and start again to recalibrate. 2. Remember to exit Tilt Mode or close the app when finished or the vehicle may continue to be controlled by the movement of your device. 13 (e 83 Features and Funtions Charge ON/OFF Switch Status Light

* If vehicle pulls to the left or right during forward driving the Wheel Alignment may need to be adjusted. The Wheel Alignment Dial is located on bottom of chassis between the front wheels. e complies contains lic ith Innovation, Sci smpt transmitter(s)/receiver

\d Economic Development to the following two conditions:

and (2) This device must accept may cause undesired operation of Q , any interference, including interference tha the device, Lmetteur'rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) Lappareil ne doit pas produire de brouillage: (2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. OT CR at-will LAOS Xe estou) Below is the App Home Screen. Start by Selecting the Vehicle you have. When the image of your vehicle is displayed you can then select a mode from the 3 mode options on the left. Selected Vehicle

% Music Select os 7 Tp to open. yes resi comes Ce preloaded with2 default songs. User can choose up to 6 songs from music that is stored on the device. Eoeaaciiea Note: Default songs can be temporarily replaced by user music but can not be deleted. DTT PTT iT cOoE MODE Mode Select Choose Vehicle Tap left & fant arrows or swipe image to scroll through vehicle options. Drive Mode Drive Mode allows you to use your device to control the vehicle by Touch or by Tilt. Mode, Sound, Light and Music options are available. Refer to the More Info section for details on these options. Speedometer Displays vehicle speed

(not actual speed). Sound ON/OFF Tap to turn sound on and off. Horn Tap to honk horn. Song Select Tap to cycle through pre-loaded songs. Light Controls Tap lights ON/OFF. Glow indicates lights are ON. Fuel Meter Displays vehicle battery life. Back to Home Screen Ol O Mode Select Tap to toggle between Touch and Tilt Mode.

EY Ree Se Left/Right Steering (Touch Mode) Press and slide finger left to turn left. Press and slide finger right to turn right. Release to stop turning. Left/Right Steering (Tilt Mode) Rotate device left to turn left. Rotate device right to turn right. Hold device straight and level to stop turning. Forward/Reverse Drive (Touch Mode) Press and slide finger upwards to drive Forward. Press and slide finger downward for Reverse Drive. Release to Stop. Forward/Reverse Drive (Tilt Mode) Tilt device forward (away from you)to drive Forward. Tilt device back (towards you) to drive in Reverse. Hold device in the Neutral (N) starting position to Stop Driving. VEHIC Charging the Battery This vehicle is equipped with an internal Lithium-ion battery that is recharged via USB. ON/OFF Switch must be in the OFF position prior to charging. USB Charging Cable and Storage Compartment Charge Status Light

. Locate the ON/OFF switch and USB cord on the under-side of the vehicle. 2. Turn the ON/OFF switch to the OFF position. Open Storage Compartment cover. 4. Remove USB cable from the Storage Compartment. (Use care when extending cord as it is attached to inside internal battery). Cord can be plugged into any computer or USB outlet brick (not included). CUZ]

. While charging, the LED under the vehicle will be on. Once fully charged the LED will turn off. Charging is completed in approximately 2 - 2.5 hour. Return cord and secure storage lid before operating the vehicle. USING the APP Draw Mode Draw Path Mode allows you to use your finger to draw any path on the screen and the vehicle will drive that path. Speed, Lights, Music, Save and Load options are also available. Refer to the More Info section for details on these options. Load Path Loads previously saved path. Pause Back to Home Screen Fre een cinue, Clear Path Save Path Clears the canvas. Saves Current Path. Play Start driving or resume driving the Pre Vehicle Speed Tap to select current path. speed. Glow indicates Sound Select current speed. Tap for Opti ap for Options Fuel Meter Displays vehicle Light Controls battery life. Tap for Options Song Select Home Tap for Options. Takes user to Tap desired song Home screen. to begin playing. Tap again to stop. Drag your finger over the canvas to produce a path the vehicle will follow. More Info Individual menu options are explained below in-depth. Light Controls Tapping Light Controls opens the Lights Options menu. Tap to choose one of 6 options, such as Bright Lights, Dim Lights, Left Turn Signal, Accelerate, Hard Stop, Right Turn Signal, Slow loop on repeat. Gear Shift, Tire Squeal Flashing, or Fast Flashing. Tap again to stop or Horn. song playback. Song Select Tapping Song Select opens the Song Options menu. Tap to choose one of 6 songs that will Sound Select Tapping Sound Select opens the Sound Options menu. Tap to choose one of 6 sounds: Engine Rev, Load Path Confirm Name & Save. Path saves as current date by default. Tap text box to edit with custom name. Delete saved path. Saved paths appear here. Tap path name to load path. PROPER USE Precautions & Care S Brush areas where dirt gets trapped. Switch vehicle OFF when not in use. Wipe body with a soft rag or tact cloth. Do not use chemicals or water to clean. Uh NCR wa Code Mode Code Path Mode allows you to select a sequence of directions that the vehicle will follow. Mode, Speed, Lights, Music, Save and Load options are available. Refer to the More Info section for details on these options. Load Path Loads previously saved path. Pause Back to Home Screen Fret nue Clear Path Save Path Clears the canvas. Saves Current Path. Play Start driving or resume driving the current path. i Tat Cy Excits Vehicle Speed Tap to select speed. Glow indicates current speed. Directions Tap for Directional Options Fuel Meter Displays vehicle battery life. Sound Select Tap for Options Light Controls Tap for Options Home Takes user to Song Select Light Input Sound Input Directional Input Home screen. Tap for Options Field Field Field Below is an example of a coded path. aT) Pace) To code a path, tap the Directions Icon to open the Directional Options Menu. Tap or drag and drop desired directions in the Directional Input Field. Choose from the following directions:

Reverse Left Right IJ Circle Drive Turn kas Tun @ Turn Add Sounds by opening the Sound Options Menu and dragging a sound to your desired location in the Sound Input Field. Open the Light Control Menu and drag the desired option into the Light Input Field to adjust the lights. To move an item to a different location, tap and hold for 2 seconds, then drag to desired location. To remove an item, tap and hold, then drag it off of the canvas. SUPPORT Trouble Shooting & Support Problem - Vehicle does not move or moves slowly.

- Make certain there are fresh alkaline batteries in the transmitter and that they have been installed in the correct position.

- Are the (+) and () markings on the alkaline batteries in the same position as the (+) and () markings in the Transmitter Battery Compartment?

- Are the metal contact tabs touching, rusty or dirty in the transmitter?

- Has the vehicle been fully charged?

- Make certain that the vehicle ON/OFF switch is in the ON position. Problem - Vehicle moves by itself or exhibits reduced range from the transmitter.

- Make certain there are no outside radio interference in your area. The best way to test this is to take the vehicle as far away from radio towers, electrical lines or tall buildings as possible to ensure no further radio interference will occur. Always remove Batteries from transmitter when not in use. Do not dispose batteries in fire. Leakage, explosion and personal injury may occur. Do not attempt jumps or tricks with this vehicle. Do not attempt to remove internal battery. Do not use included USB cord for anything other than its intended purpose. Always keep USB cord stored when not in use. Adult supervision recommended. FCC CAUTION:

Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 ofthe FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more ofthe following measures:

- Reorient or relocate the receiving antenna.

= Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

= Consult the dealer or an experienced radio/TV technician for help.

Made reel thy ie een eR OO cS

| aK Cann Reece COTE ONES uc ca re ae Tie)

(2) this device must accept any interference received, including interference that may cause undesired operation.

VAS Yd lor HATE AKL |Z INEW{BRIGH TYINDUSTRIALTCOMLTDS New Bright Building, 11 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong. Tel: (852) 2798 1188 Fax: (852) 2795 3665 Date: 2019/3/29 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To whom it may concern:

I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). -

In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to:

a) comply with the relevant provisions of the certification program;

b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;

c) make claims regarding certification only in respect of the scope for which certification has been granted;

d) do not use,our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;

g) h) j) k) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;

use certification only to indicate the products are certified as being in conformity with specified standards;

endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;

ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division;

keep a record of all complaints made known to us relating to the products compliance with requirements of the relevant standard and to make these records available to the when requested;

take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;

document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signed by:

Company Name: New Bright Industrial Co Ltd Contact Name: Eric Kwok Title of Person : Quality Manager Address: New Bright Building 11 Sheung Yuet Road, Kowloon Bay, Kowloon Hong Kong

Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject:Request for Confidentiality FCC ID: G6D1429UB To Whom It May Concern:

Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Company Name: New Bright Industrial Co., Ltd. Contact Name: Eric Kwok Title of PersonQuality Manager Address: New Bright Building 11 Sheung Yuet Road, Kowloon Bay, Kowloon Hongkong Date: 2020/5/27