| all | frequencies |
|
exhibits | applications |
|---|---|---|---|---|
| manual |
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 |
|
User Manual | Users Manual | 2.19 MiB | July 08 2019 | |||
| 1 | Block Diagrams | Block Diagram | August 07 2019 | confidential | ||||
| 1 |
|
Confidentiality Request | Cover Letter(s) | 26.08 KiB | July 08 2019 | |||
| 1 |
|
Declaration | Cover Letter(s) | 191.21 KiB | July 08 2019 | |||
| 1 |
|
External Photo | External Photos | 624.46 KiB | July 08 2019 | |||
| 1 |
|
ID Label | ID Label/Location Info | 135.41 KiB | July 08 2019 | |||
| 1 |
|
Internal Photo | Internal Photos | 350.70 KiB | July 08 2019 | |||
| 1 |
|
Report | Test Report | 628.13 KiB | July 08 2019 | |||
| 1 | Schematics | Schematics | August 07 2019 | confidential | ||||
| 1 |
|
Setup Photo | Test Setup Photos | 408.62 KiB | July 08 2019 | |||
| 1 | Technical Description | Operational Description | August 07 2019 | confidential | ||||
| 1 |
|
agent auth letter | Cover Letter(s) | 665.26 KiB | July 08 2019 |
| 1 | User Manual | Users Manual | 2.19 MiB | July 08 2019 |
Transmitter Note: When replacing Transmitter batteries:
Use alkaline batteries only. Do not mix old and new batteries. Do not mix alkaline, standard or rechargeable batteries. START/MUTE SOUND: ENGINE:
Press to hear : Press for sound. Press again Engine sounds. for mute. Forward/Reverse (Sounds will continue as Left/Right Drive long as car is active. Press Steering again to turn off the sounds. Press start to reactivate Note: sounds.) Vehicle has working lights. When driving forward or reverse the lights will turn on. When stopping either in forward or reverse the lights will turn off. This transmitter is equipped with 2.4GHz technology which allows up to 6 vehicles to be raced at the same time. The transmitter will automatically sync with the vehicle. OWNERS MANUAL Please read and understand all precautions prior to use. Thank you for choosing a premium New Bright product. USA & Canada 30-Day Limited Warranty New Bright Industries warrants to the original purchaser that this product will be free of defects in materials and workmanship for thirty (30) days from the date of purchase. In the event of such defect within the warranty period, New Bright will repair or replace the product at our sole discretion. This warranty does not cover damage resulting from unauthorized modifications, accident, misuse or abuse. Should your item have a defect covered under this warranty, first call the toll free number listed below. Most problems can be resolved in this manner. If necessary, you will be issued a Return Authorization number (RA) and instructions on how to obtain a Product Return Form. The Product Return Form is to be used when returning a product to us (postage pre-paid and insured by the consumer). When returning a defective product, please package the product, the Product Return Form and a copy of the dated sales receipt as proof of purchase. Be sure to mark the RA number on the Product Return Form. If the product is returned without a dated sales receipt, it will be excluded from coverage under this warranty. Please allow 4 to 6 weeks for delivery of repaired or replacement vehicles (depending on your location). New Bright Industries liability for defects in materials and workmanship under this warranty shall be limited to repair or replacement at our sole discretion. In no event shall we be responsible for incidental, consequential or contingent damages (except in those states that do not allow this exclusion or limitation). Valid only in the USA & Canada. Contact New Bright Industries Customer Service Toll Free at:
1-877-NBI-TOYS
(1-877-624-8697) Monday through Friday, 8:00 AM to 5:00 PM Eastern Time REF U06416.72309102 JN133-19 _ New Bright Section 1: Table of Contents . , e (1) R/C Vehicle With USB Cord
"Section 2: Component Checklist (1) Transmitter Removing Demo Wire e (2) AA Batteries Section 3: | Vehicle Features & Functions Section 4: Charging the Battery This vehicle is shipped with a demo wire which runs from the transmitter to the vehicle chassis. The wire is for package demonstration only and should be removed and discarded as shown here. Section 5: Transmitter Battery Installation Transmitter Features & Functions Section 6: Proper Use Precautions & Care Section 7: Trouble Shooting & Support lies Pull in a straight, outward direction. Remove and discard the demo wire which runs from the vehicle to the controller. This device complies with industry Canada licence-exempt RSS standard{s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of he device. Charge ON/OFF Switch Le prsent apparel est conforme aux CNR d'industrie Canada . applcabls aux apparels radio exempts delience. explain est Statu s Li g ht autorise aux deux conditions suivantes: (1) fappareil ne doit pas Droduire de brouillage, et (2) l'utilisateur de 'aparel doit aocepter tout brouillage radiBlectrique subi, mme sie broullage est susceptible den compromete le foncionnement
* If vehicle pulls to the left or right during forward driving the Wheel Alignment may need to be adjusted. The Wheel Alignment Dial is located on bottom of chassis between the front wheels. This vehicle is equipped with an internal Lithium-Ion battery that is recharged via USB. ON/OFF Switch must be in the OFF position prior to charging. USB Charging Cable and Storage Compartment 1. Locate the ON/OFF switch and USB cord on the under-side of the vehicle. Turn the ON/OFF switch to the OFF position. 3. Open Storage Compartment cover. Remove USB cable from the Storage Compartment. (Use care when extending cord as it is attached to inside internal battery). Cord can be plugged into any computer or USB outlet brick (not included).
- While charging, the LED under the vehicle will be on. Once fully charged the LED will turn off. Charging is completed in approximately 2.5 hours. Return cord and secure storage lid before operating the vehicle. Proper Use Problem - Vehicle does not move or moves slowly.
- Make certain there are fresh alkaline batteries in the transmitter and that they have been installed in the correct position.
- Are the (+) and () markings on the alkaline batteries in the same position as the (+) and (-) markings in the Transmitter Battery Compartment?
- Are the metal contact tabs touching, rusty or dirty in the transmitter?
- Has the vehicle been fully charged?
- Make certain that the vehicle ON/OFF switch is in the ON position. Problem - Vehicle moves by itself or exhibits reduced range from the transmitter.
- Make certain there are no outside radio interference in your area. The best way to test this is to take the vehicle as far away from radio towers, electrical lines or tall buildings as possible to ensure no further radio interference will occur. Always remove Batteries from transmitter when not in use. Do not dispose batteries in fire: Leakage, explosion and personal injury may occur. Do not attempt jumps or tricks with this vehicle. Do not attempt to remove internal battery. Do not use included USB cord for anything other than its intended purpose. Always keep USB cord stored when not in use. Adult supervision recommended. FCC CAUTION:
Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
| 1 | Confidentiality Request | Cover Letter(s) | 26.08 KiB | July 08 2019 |
Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: G6D1460B To Whom It May Concern:
Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Company Name: New Bright Industrial Co., Ltd. Contact Name: Eric Kwok Title of Person Address: New Bright Building 11 Sheung Yuet Road, Kowloon Bay, Kowloon Hongkong Date: 2019/05/02 Quality Manager
| 1 | Declaration | Cover Letter(s) | 191.21 KiB | July 08 2019 |
NEW BRIGHT INDUSTRIAL CO., LTD Address: 9/F., NEW BRIGHT BUILDING, 11 SHEUNG YUET ROAD, KOWLOON BAY, KOWLOON, HONG KONG. Confirmation Letter We, NEW BRIGHT INDUSTRIAL CO., LTD The product: TOY Receiver And model No.: 1460B The device, model: 1460B , may be formed with different color or slightly differences on the exterior mechanism, yet the interior design are electrically and electronically identical including circuitry and PCB layout. Company Name: New Bright Industrial Co., Ltd. Contact Name: Eric Kwok Title of Person : Quality .Manager Address: New Bright Building 11 Sheung Yuet Road, Kowloon Bay, Kowloon Hongkong
| 1 | External Photo | External Photos | 624.46 KiB | July 08 2019 |
Appendix I External Photographs View of EUT-1 View of EUT-2 Page 2 of 5 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. View of EUT-3 View of EUT-4 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. Page 3 of 5 View of EUT-5 View of EUT-6 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. Page 4 of 5 View of EUT-7 View of EUT-8 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. Page 5 of 5
| 1 | ID Label | ID Label/Location Info | 135.41 KiB | July 08 2019 |
Fcc ip: G6D1460B New Bright Made in China This device complies with part 15 of the FCC Rules. ae ee ee yee LL fl this device may not cause harmful interference, and Pie Ta ee eM ae including interterence that may cause undesired opera
| 1 | Internal Photo | Internal Photos | 350.70 KiB | July 08 2019 |
Appendix Internal Photographs Internal View of EUT-1 Internal View of EUT-2 Page 2 of 4 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. Internal View of EUT-3 Internal View of EUT-4 Page 3 of 4 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. Internal View of EUT-5 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services
(Guangzhou) Co., Ltd, Song Shan Lake Branch. Page 4 of 4
| 1 | Report | Test Report | 628.13 KiB | July 08 2019 |
FCC Part15, Subpart B ICES-003 TEST REPORT For TOY Receiver MODEL NUMBER: 1460B FCC ID: G6D1460B REPORT NUMBER: 4788960674.1-2 ISSUE DATE: April 29, 2019 Prepared for 9/F., NEW BRIGHT BUILDING, 11 SHEUNG YUET ROAD, KOWLOON BAY, NEW BRIGHT INDUSTRIAL CO., LTD KOWLOON, HONG KONG. Prepared by UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch Building 10, Innovation Technology Park, No. 1, Li Bin Road, Song Shan Lake Hi-
Tech Development Zone Dongguan, 523808, Peoples Republic of China Tel: +86 769 22038881 Fax: +86 769 33244054 Website: www.ul.com The results reported herein have been performed in accordance with the laboratorys terms of accreditation. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report apply to the test sample(s) mentioned above at the time of the testing period only and are not to be used to indicate applicability to other similar products. This report does not imply that the product(s) has met the criteria for certification. REPORT NO.: 4788960674.1-2 Page 2 of 23 Revision History Rev. Issue Date Revisions Revised By Initial Issue V0 04/29/2019 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4788960674.1-2 Page 3 of 23 Summary of Test Results Standard Test Item Limit Result Remark FCC Part15, Subpart B ICES-003 Issue 6 ANSI C63.4-2014 Conducted Disturbance Class B PASS Radiated Disturbance below 1 GHz Class B PASS Radiated Disturbance above 1 GHz Class B PASS NOTE (1) NOTE (2) Note:
(1) N/A denotes test is not applicable in this Test Report
(2) If the highest frequency of the internal sources of the EUT is less than 108 MHz, the measurement shall only be made up to 1 GHz. If the highest frequency of the internal sources of the EUT is between 108 MHz and 500 MHz, the measurement shall only be made up to 2 GHz. If the highest frequency of the internal sources of the EUT is between 500 MHz and 1 GHz, measurement shall only be made up to 5 GHz. If the highest frequency of the internal sources of the EUT is above 1 GHz, the measurement shall be made up to 5 times the highest frequency or 40 GHz, whichever is less. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4788960674.1-2 Page 4 of 23 CONTENTS 1. ATTESTATION OF TEST RESULTS ..................................................................................... 5 2. TEST METHODOLOGY ......................................................................................................... 6 3. FACILITIES AND ACCREDITATION ..................................................................................... 6 4. CALIBRATION AND UNCERTAINTY ................................................................................... 7 4.1. 4.2. Measuring Instrument Calibration ............................................................................. 7 Measurement Uncertainty ......................................................................................... 7 5. EQUIPMENT UNDER TEST .................................................................................................. 8 5.1. 5.2. 5.3. 5.4. Description of EUT .................................................................................................... 8 Test Mode ................................................................................................................ 8 EUT Accessory ......................................................................................................... 8 Support Units or Accessories for System Test .......................................................... 9 6. MEASURING EQUIPMENT AND SOFTWARE USED......................................................... 10 7. EMISSION TEST ................................................................................................................. 11 7.1. Conducted Disturbance Measurement .................................................................... 11 7.1.1. Limits of conducted disturbance voltage ................................................................. 11 7.1.2. Test Procedure ....................................................................................................... 11 7.1.3. Test Setup .............................................................................................................. 12 7.1.4. Test Environment .................................................................................................... 12 7.1.5. Test Mode ............................................................................................................... 12 7.1.6. Test Results ............................................................................................................ 13 7.2. Radiated Disturbance Measurement ....................................................................... 15 7.2.1. Limits of radiated disturbance measurement ........................................................... 15 7.2.2. Test Procedure ....................................................................................................... 16 7.2.3. Test Setup .............................................................................................................. 16 7.2.4. Test Environment .................................................................................................... 17 7.2.5. Test Mode ............................................................................................................... 17 7.2.6. Test Results below 1GHz .................................................................................... 18 7.2.7. Test Results above 1GHz .................................................................................... 22 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4788960674.1-2 Page 5 of 23 1. ATTESTATION OF TEST RESULTS Applicant Information Company Name: NEW BRIGHT INDUSTRIAL CO., LTD Address: 9/F., NEW BRIGHT BUILDING, 11 SHEUNG YUET ROAD, Manufacturer Information Company Name: NEW BRIGHT INDUSTRIAL CO., LTD Address: 9/F., NEW BRIGHT BUILDING, 11 SHEUNG YUET ROAD, KOWLOON BAY, KOWLOON, HONG KONG. EUT Information EUT Name:
Model:
Brand:
Sample Status:
Date of Tested:
KOWLOON BAY, KOWLOON, HONG KONG. TOY Receiver 1460B
/
Normal April 8, 2019 ~ April 24, 2019 APPLICABLE STANDARDS STANDARDS FCC Part15, Subpart B ICES-003 Issue 6 ANSI C63.4-2014 TEST RESULTS PASS Prepared By:
Checked By:
Gary Zhang Shawn Wen Engineer Project Associate Laboratory Leader Approved By:
Stephen Guo Laboratory Manager UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4788960674.1-2 Page 6 of 23 2. TEST METHODOLOGY All tests were performed in accordance with the standard FCC Part15 Subpart B, ANSI C63.4-
2014, and ICES-003 Issue 6. 3. FACILITIES AND ACCREDITATION Accreditation Certificate A2LA (Certificate No.: 4102.01) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch. has been assessed and proved to be in compliance with A2LA. FCC (FCC Designation No.: CN1187) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch. Has been recognized to perform compliance testing on equipment subject to the Commission's Delcaration of Conformity (DoC) and Certification rules IC(Company No.: 21320) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch. has been registered and fully described in a report filed with Industry Canada. The Company Number is 21320. VCCI (Registration No.: G-20019, R-20004, C-20012 and T-20011) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch. has been assessed and proved to be in compliance with VCCI, the Membership No. is 3793. Facility Name:
Chamber D, the VCCI registration No. is G-20019 and R-20004 Shielding Room B , the VCCI registration No. is C-20012 and T-20011 Note: All tests measurement facilities use to collect the measurement data are located at Building 10, Innovation Technology Park, No. 1, Li Bin Road, Song Shan Lake Hi-Tech Development Zone Dongguan, 523808, Peoples Republic of China UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4788960674.1-2 Page 7 of 23 4. CALIBRATION AND UNCERTAINTY 4.1. Measuring Instrument Calibration The measuring equipment utilized to perform the tests documented in this report has been calibrated in accordance with the manufacturer's recommendations, and is traceable to recognized national standards. 4.2. Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the apparatus:
Test Item Conducted emissions from the AC mains power ports Conducted emissions from the AC mains power ports Radiated emissions Radiated emissions Measurement Frequency Range 0.009MHz ~ 0.15MHz 0.15MHz ~ 30MHz 30MHz ~ 1GHz 1GHz ~ 18GHz K 2 2 2 2 U(dB) 4.00 3.62 4.00 5.78 Note: This uncertainty represents an expanded uncertainty expressed at approximately the 95%
confidence level using a coverage factor of k=2. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4788960674.1-2 Page 8 of 23 5. EQUIPMENT UNDER TEST 5.1. Description of EUT EUT Name TOY Receiver Model Battery 1460B DC 6.4V 5.2. Test Mode Test Mode Description Mode 1 Charging Mode 2 Running 5.3. EUT Accessory Item Accessory Brand Name Model Name Description
/
/
/
/
/
UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4788960674.1-2 Page 9 of 23 5.4. Support Units or Accessories for System Test The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. Item
/
Equipment Mfr/Brand Model/Type No. Specification Series No.
/
/
/
/
/
The following cables were used to form a representative test configuration during the tests. Item
/
Type of cable Shielded Type Ferrite Core Specification
/
/
/
/
UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4788960674.1-2 Page 10 of 23 6. MEASURING EQUIPMENT AND SOFTWARE USED Conducted Emissions Equipment Manufacturer Model No. Serial No. Last Cal. Due Date EMI Test Receiver Two-Line V-
Network Artificial Mains Networks R&S R&S ESR3 101961 Dec. 10, 2018 Dec. 10, 2019 ENV216 101983 Dec. 10, 2018 Dec. 10, 2019 Schwarzbeck NSLK 8126 8126465 Dec. 10, 2018 Dec. 10, 2019 Software Description Manufacturer Name Version Test Software for Conducted Emissions Farad EZ-EMC Ver. UL-3A1 Radiated Emissions Equipment Manufacturer Model No. Serial No. Last Cal. Next Cal. MXE EMI Receiver Hybrid Log Periodic Antenna Preamplifier EMI Measurement Receiver Horn Antenna Preamplifier KESIGHT N9038A MY56400036 Dec. 10, 2018 Dec. 10, 2019 TDK HP R&S TDK TDK HLP-3003C 130960 Sept. 17, Sept. 17, 2018 2021 8447D 2944A09099 Dec. 10, 2018 Dec. 10, 2019 ESR26 101377 Dec. 10, 2018 Dec. 10, 2019 HRN-0118 130939 PA-02-0118 TRS-305-
00067 Sept. 17, Sept. 17, 2018 2021 Apr. 8, 2018 Apr. 8, 2019 Horn Antenna Schwarzbeck BBHA9170
#691 Aug. 11, 2018 Aug. 11, 2019 Preamplifier Preamplifier TDK TDK PA-02-2 PA-02-3 Loop antenna Schwarzbeck 1519B Preamplifier TDK PA-02-001-
3000 Software TRS-307-
00003 TRS-308-
00002 00008 TRS-302-
00050 Dec. 10, 2018 Dec. 10, 2019 Dec. 10, 2018 Dec. 10, 2019 Mar. 26, 2016 Mar. 26, 2019 Jan. 07, 2019 Jan. 07, 2022 Description Manufacturer Name Version Test Software for Radiated Emissions Farad EZ-EMC Ver. UL-3A1 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4788960674.1-2 Page 11 of 23 7. EMISSION TEST 7.1. Conducted Disturbance Measurement 7.1.1. Limits of conducted disturbance voltage FREQUENCY
(MHz) 0.15 -0.5 0.50 -5.0 5.0 -30.0 Note:
Class A (dBV) Class B (dBV) Quasi-peak Average Quasi-peak 79.00 73.00 73.00 66.00 60.00 60.00 66 - 56 *
56.00 60.00 Average 56 - 46*
46.00 50.00
(1) The tighter limit applies at the band edges.
(2) The limit of " * " marked band means the limitation decreases linearly with the logarithm of the frequency in the range. The following table is the setting of the receiver Receiver Parameters Attenuation Start Frequency Stop Frequency IF Bandwidth 7.1.2. Test Procedure Setting 10 dB 0.15 MHz 30 MHz 9 kHz a. The EUT was placed 0.8 meters from the horizontal ground plane with EUT being connected to the power mains through a line impedance stabilization network (LISN). All other support equipments powered from additional LISN(s). The LISN provide 50 ohm/
50uH of coupling impedance for the measuring instrument. b. Interconnecting cables that hang closer than 40 cm to the ground plane shall be folded back and forth in the center forming a bundle 30 to 40 cm long. c. I/O cables that are not connected to a peripheral shall be bundled in the center. The end of the cable may be terminated, if required, using the correct terminating impedance. The overall length shall not exceed 1 m. d. LISN at least 80 cm from nearest part of EUT chassis. e. For the actual test configuration, please refer to the related Item: Photographs of Test Configuration. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4788960674.1-2 Page 12 of 23 7.1.3. Test Setup 40cm 80cm EUT 80cm AMN Receiver For the actual test configuration, please refer to Appendix I: Photographs of Test Configuration. 7.1.4. Test Environment Temperature:
Humidity:
24 53%
ATM pressure:
101kPa 7.1.5. Test Mode Pre-test Mode:
Mode 1 Final Test Mode:
Mode 1 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4788960674.1-2 Page 13 of 23 7.1.6. Test Results Test Mode:
Mode 1 Test Voltage:
AC 120V/60Hz Phase: Line No. Frequency 1 2 3 4 5 6 7 8 9 10 11 12
(MHz) 0.4834 0.4834 0.5095 0.5095 0.9672 0.9672 1.8635 1.8635 4.0959 4.0959 23.2383 23.2383 Reading
(dBuV) 34.94 31.04 32.51 27.07 28.91 19.36 22.75 17.62 18.89 10.26 16.96 9.18 Correct
(dB) 9.60 9.60 9.60 9.60 9.61 9.61 9.62 9.62 9.66 9.66 10.01 10.01 Result
(dBuV) 44.54 40.64 42.11 36.67 38.52 28.97 32.37 27.24 28.55 19.92 26.97 19.19 Limit
(dBuV) 56.28 46.28 56.00 46.00 56.00 46.00 56.00 46.00 56.00 46.00 60.00 50.00 Margin
(dB)
-11.74
-5.64
-13.89
-9.33
-17.48
-17.03
-23.63
-18.76
-27.45
-26.08
-33.03
-30.81 Remark:
Result = Reading +Correct (Insertion Loss + Cable Loss + Attenuator Factor) Margin = Result - Limit Remark QP AVG QP AVG QP AVG QP AVG QP AVG QP AVG UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4788960674.1-2 Page 14 of 23 Test Mode:
Mode 1 Test Voltage:
AC 120V/60Hz Phase: Neutral No. Frequency Reading Correct 1 2 3 4 5 6 7 8 9 10 11 12
(MHz) 0.4083 0.4083 0.4840 0.4840 0.9678 0.9678 1.8901 1.8901 5.0463 5.0463 22.8488 22.8488
(dBuV) 29.42 22.83 35.22 31.56 28.80 19.41 22.69 17.86 19.74 11.57 17.41 9.81
(dB) 9.60 9.60 9.60 9.60 9.61 9.61 9.63 9.63 9.67 9.67 10.14 10.14 Result
(dBuV) 39.02 32.43 44.82 41.16 38.41 29.02 32.32 27.49 29.41 21.24 27.55 19.95 Limit
(dBuV) 57.68 47.68 56.27 46.27 56.00 46.00 56.00 46.00 60.00 50.00 60.00 50.00 Margin
(dB)
-18.66
-15.25
-11.45
-5.11
-17.59
-16.98
-23.68
-18.51
-30.59
-28.76
-32.45
-30.05 Remark:
Result = Reading +Correct (Insertion Loss + Cable Loss + Attenuator Factor) Margin = Result - Limit Remark QP AVG QP AVG QP AVG QP AVG QP AVG QP AVG UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4788960674.1-2 Page 15 of 23 7.2. Radiated Disturbance Measurement 7.2.1. Limits of radiated disturbance measurement Below 1 GHz Measurement Method and Applied Limits:
ANSI C63.4:
Frequency
(MHz) 30 - 88 88 - 216 216 - 960 Above 960 Class A Field strength Field strength
(uV/m) ( at 10m)
(dBuV/m) (at 3m) Class B Field strength
(dBuV/m) (at 3m) 90 150 210 300 49.5 53.9 56.9 60 40 43.5 46 54 Above 1 GHz Measurement Method and Applied Limits:
ANSI C63.4:
Frequency
(MHz) Class A
(dBuV/m) (at 3m) Peak Average Above 1000 80 60
(dBuV/m) (at 10m) Peak 69.5 49.5 Average Class B
(dBuV/m) (at 3m) Peak Average 74 54 Frequency Range of Radiated Disturbance Measurement Highest frequency generated or Upper frequency of measurement used in the device or on which the device operates or tunes
(MHz) Below 1.705 1.705 - 108 108 - 500 500 - 1000 Above 1000 Range (MHz) 30 1000 2000 5000 5th harmonic of the highest frequency or 40 GHz, whichever is lower NOTE:
(1) The limit for radiated test was performed according to FCC Part 15, Subpart B;
(2) The tighter limit applies at the band edges;
(3) Emission level (dBuV/m) = 20log Emission level (uV/m), 3m Emission level = 10m Emission level + 20log(10m/3m);
UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4788960674.1-2 Page 16 of 23 7.2.2. Test Procedure a. The measuring distance of at 3m shall be used for measurements at frequency up to 1GHz. b. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber. The table was rotated 360 degrees to determine the position of the highest radiation. c. The height of the equipment or of the substitution antenna shall be 0.8 m; the height of the test antenna shall vary between 1 m to 4 m. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For the actual test configuration, please refer to the related Item:EUT Photographs of Test Configuration. 7.2.3. Test Setup
(a) Radiated Disturbance Test Set-Up Frequency 30MHz - 1GHz Cabinet Receiver Position Controller Preamplifier Semi Anechoic Chamber Antenna Tower 3m 360 EUT Turntable 0.8m 1m4m Antenna UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4788960674.1-2 Page 17 of 23
(b) Radiated Disturbance Test Set-Up Frequency above 1GHz Semi Anechoic Chamber Antenna Mount 360 EUT 0.8m 1m~4m 3m Cabinet Receiver Position Controller Preamplifier For the actual test configuration, please refer to Appendix I: Photographs of Test Configuration. 7.2.4. Test Environment Radiated Disturbance - below 1 GHz Radiated Disturbance - above 1 GHz Temperature:
Humidity:
24 60%
Temperature:
Humidity:
24.2 57%
ATM pressure:
101kPa ATM pressure:
101kPa 7.2.5. Test Mode Radiated Disturbance - below 1 GHz Radiated Disturbance - above 1 GHz Pre-test Mode:
Mode 1 & Mode 2 Pre-test Mode:
Mode 1 & Mode 2 Final Test Mode: Mode 1 & Mode 2 Final Test Mode: Mode 2 Note: All test modes have been tested, but only the worst case data recorded in the report. UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4788960674.1-2 Page 18 of 23 7.2.6. Test Results below 1GHz Test Mode:
Mode 1 Test Voltage:
AC 120V/60Hz Polarization: Vertical No. Frequency Reading Correct Result Limit Margin Remark 1 2 3 4 5 6
(MHz)
(dBuV)
(dB/m)
(dBuV/m)
(dBuV/m) 30.0000 48.4300 61.0400 127.0000 250.1900 408.3000 50.76 40.47 38.24 35.46 30.58 24.84
-17.00
-18.30
-19.51
-19.92
-16.12
-12.19 33.76 22.17 18.73 15.54 14.46 12.65 40.00 40.00 40.00 43.50 46.00 46.00
(dB)
-6.24
-17.83
-21.27
-27.96
-31.54
-33.35 peak peak peak peak peak peak Remark:
Result = Reading +Correct (Amplifier Factor + Cable Loss + Antenna Factor) Margin = Result - Limit UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4788960674.1-2 Page 19 of 23 Test Mode:
Mode 1 Test Voltage:
AC 120V/60Hz Polarization: Horizontal No. Frequency Reading Correct Result Limit Margin Remark 1 2 3 4 5 6
(MHz)
(dBuV)
(dB/m)
(dBuV/m)
(dBuV/m)
(dB) 48.4300 94.0199 129.9100 250.1900 281.2300 309.3599 25.55 30.08 33.35 32.95 30.19 29.61
-18.30
-21.36
-19.57
-16.12
-14.79
-13.80 7.25 8.72 13.78 16.83 15.40 15.81 40.00 43.50 43.50 46.00 46.00 46.00
-32.75
-34.78
-29.72
-29.17
-30.60
-30.19 peak peak peak peak peak peak Remark:
Result = Reading +Correct (Amplifier Factor + Cable Loss + Antenna Factor) Margin = Result - Limit UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4788960674.1-2 Page 20 of 23 Test Mode:
Mode 2 Polarization: Vertical No. Frequency Reading Correct Result Limit Margin Remark 1 2 3 4 5 6
(MHz)
(dBuV)
(dB/m)
(dBuV/m)
(dBuV/m)
(dB) 208.4800 250.1900 293.8400 379.2000 653.7100 870.0200 44.49 38.26 44.79 36.92 36.28 35.01
-16.24
-16.12
-14.22
-12.67
-7.50
-4.46 28.25 22.14 30.57 24.25 28.78 30.55 43.50 46.00 46.00 46.00 46.00 46.00
-15.25
-23.86
-15.43
-21.75
-17.22
-15.45 QP QP QP QP QP QP Remark:
Result = Reading +Correct (Amplifier Factor + Cable Loss + Antenna Factor) Margin = Result - Limit UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4788960674.1-2 Page 21 of 23 Test Mode:
Mode 2 Polarization: Horizontal No. Frequency Reading Correct Result Limit Margin Remark 1 2 3 4 5 6
(MHz)
(dBuV)
(dB/m)
(dBuV/m)
(dBuV/m)
(dB) 164.8300 239.5200 294.8100 334.5799 857.4100 900.0900 47.56 47.23 52.79 46.95 30.99 30.19
-17.54
-17.07
-14.14
-13.48
-4.56
-4.11 30.02 30.16 38.65 33.47 26.43 26.08 43.50 46.00 46.00 46.00 46.00 46.00
-13.48
-15.84
-7.35
-12.53
-19.57
-19.92 QP QP QP QP QP QP Remark:
Result = Reading +Correct (Amplifier Factor + Cable Loss + Antenna Factor) Margin = Result - Limit UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4788960674.1-2 Page 22 of 23 7.2.7. Test Results above 1GHz Test Mode:
Mode 2 Polarization: Vertical No. Frequency 1 2 3 4 5 6
(MHz) 1609.646 1773.127 2263.960 2796.573 3454.486 5434.559 Reading
(dBuV) 62.58 61.43 59.70 57.50 56.64 49.37 Correct
(dB/m)
-12.20
-11.21
-9.62
-7.26
-5.56 1.36 Result Limit
(dBuV/m)
(dBuV/m) 50.38 50.22 50.08 50.24 51.08 50.73 74.00 74.00 74.00 74.00 74.00 74.00 Margin
(dB)
-23.62
-23.78
-23.92
-23.76
-22.92
-23.27 Remark peak peak peak peak peak peak Remark:
Result = Reading +Correct (Amplifier Factor + Cable Loss + Antenna Factor) Margin = Result - Limit UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. REPORT NO.: 4788960674.1-2 Page 23 of 23 Test Mode:
Mode 2 Polarization: Horizontal No. Frequency 1 2 3 4 5 6
(MHz) 1605.554 2018.928 2617.477 3561.636 4858.720 9710.031 Reading
(dBuV) 61.98 60.37 58.66 55.18 50.29 40.46 Correct
(dB/m)
-12.21
-10.74
-8.49
-5.08
-0.87 10.34 Result Limit Margin Remark
(dBuV/m)
(dBuV/m)
(dB) 49.77 49.63 50.17 50.10 49.42 50.80 74.00 74.00 74.00 74.00 74.00 74.00
-24.23
-24.37
-23.83
-23.90
-24.58
-23.20 peak peak peak peak peak peak Remark:
Result = Reading +Correct (Amplifier Factor + Cable Loss + Antenna Factor) Margin = Result - Limit END OF REPORT UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch.
| 1 | Setup Photo | Test Setup Photos | 408.62 KiB | July 08 2019 |
Appendix Setup Photographs Conducted Disturbance Radiated Disturbance below 1GHz Radiated Disturbance Above 1GHz
| 1 | agent auth letter | Cover Letter(s) | 665.26 KiB | July 08 2019 |
VAS Yd lor HATE AKL |Z INEW{BRIGH TYINDUSTRIALTCOMLTDS New Bright Building, 11 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong. Tel: (852) 2798 1188 Fax: (852) 2795 3665 Date: 2019/3/29 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To whom it may concern:
I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). -
In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to:
a) comply with the relevant provisions of the certification program;
b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;
c) make claims regarding certification only in respect of the scope for which certification has been granted;
d) do not use,our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;
g) h) j) k) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;
use certification only to indicate the products are certified as being in conformity with specified standards;
endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;
ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division;
keep a record of all complaints made known to us relating to the products compliance with requirements of the relevant standard and to make these records available to the when requested;
take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;
document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signed by:
Company Name: New Bright Industrial Co Ltd Contact Name: Eric Kwok Title of Person : Quality Manager Address: New Bright Building 11 Sheung Yuet Road, Kowloon Bay, Kowloon Hong Kong
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2019-08-07 | JBP - Part 15 Class B Computing Device Peripheral | Original Equipment |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 | Effective |
2019-08-07
|
||||
| 1 | Applicant's complete, legal business name |
New Bright Industrial Co Ltd
|
||||
| 1 | FCC Registration Number (FRN) |
0006258263
|
||||
| 1 | Physical Address |
New Bright Bldg
|
||||
| 1 |
Kowloon Bay Kowloon, N/A
|
|||||
| 1 |
Hong Kong
|
|||||
| app s | TCB Information | |||||
| 1 | TCB Application Email Address |
L******@ul.com
|
||||
| 1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
| app s | FCC ID | |||||
| 1 | Grantee Code |
G6D
|
||||
| 1 | Equipment Product Code |
1460B
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 | Name |
E**** K******
|
||||
| 1 | Title |
Quality Manager
|
||||
| 1 | Telephone Number |
(852)********
|
||||
| 1 | Fax Number |
(852)********
|
||||
| 1 |
c******@newbright.com
|
|||||
| app s | Technical Contact | |||||
| n/a | ||||||
| app s | Non Technical Contact | |||||
| n/a | ||||||
| app s | Confidentiality (long or short term) | |||||
| 1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 | Equipment Class | JBP - Part 15 Class B Computing Device Peripheral | ||||
| 1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | TOY Receiver | ||||
| 1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 | Modular Equipment Type | Does not apply | ||||
| 1 | Purpose / Application is for | Original Equipment | ||||
| 1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
| 1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| 1 | Firm Name |
UL Verification Services (Guangzhou) Co., Ltd.
|
||||
| 1 | Name |
S**** G********
|
||||
| 1 | Telephone Number |
+86 0********
|
||||
| 1 |
S******@ul.com
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 15B | |||||||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC