hone wn oO ROMs ONON 9. Features - Operated by the Transmitter:
. Move Left joystick up to move the vehicle FORWARD. Move Left joystick down to move the vehicle in REVERSE. Move Right joystick left or right to move vehicle LEFT or RIGHT. This vehicle has lights.
* When driving forward or reverse the lights will turn on
* When stopping in forward or reverse the lights will turn off. Batteries/Recharging Unit (Included):
Transmitter - 2 AA batteries. Vehicle internal rechargeable Lithium lon Battery with USB Charging Cord. The Transmitter:
insert 2 AA batteries in the battery compartment at the back of the transmitter. Be sure the (+) and (-) are properly matched. The transmitter will automatically sync with the vehicle. The vehicie is equipped with 2.4GHz technology which allows up to 6 vehicles to be raced at the same time. Charge by USB:
. Locate the ON/OFF Switch on underside of vehicle and switch to the OFF position . Open the USB Cord Compartment cover located on the underside of the vehicle. Use care when extending cord. Do not puil or tug on cord. Plug USB cord into any computer or USB outlet brick (not included). While charging, the Charging Status Light will be on. Once fully charged the light wili turn off. (Approx. 1.5-2 hours When charging from a computer). Steering Trim:
Adjust the steering trim located underneath the vehicle between the front wheels. IMPORTANT!
The internal Lithium lon battery pack is only PARTIALLY CHARGED prior to shipment and it is recommended the battery be fully charged before first use. Caution:
Chargers used with the toy are to be regularly examined for damage to the cord, plug, enclosure and other parts, and that, in the event of such damage, the toy must not be used with this charger cable until the damage has been repaired. Notes:
. Operate the vehicle within 80-100 feet (25-30 meters) range. Switch off the tay when not in use. Remove AA batteries in transmitter when not in use for long periods If vehicle is not functioning properly, make sure batteries in transmitter are fresh, vehicie is fully charged. Adult supervision recommended. Please remove all packaging attachments before giving this toy to your child. Do not insert the USB cable into electrical socket outiets. Do not use the included USB cable for purpose other than recharging this vehicle. USB Power Adapter is not included. 10.To protect the battery and proiong its life, do not overcharge the vehicie. 11.The toy is only to be connected to equipment of Class Il bearing this symbol. [0 The reception performance may be affected under a strong interference disturbance environment. This product would not perform normally under a strong electrostatic environment. We wish you many happy hours of pleasure with your New Bright toy. REF U05516 BWM Rw a ON Qn 7 8 a Fonctions disponibles sur la radiocommande:
Pousser le levier gauche vers le haut pour faire avancer le vhicule. Pousser le levier gauche vers le bas faire reculer ie vhicule Dplacer le levier 4 droite ou 4 gauche pour changer de direction. Ce vhicule est quip de phares a l'avant et a l'arrire.
* Lorsque le vhicuie roule les phares avant et arrire sallument.
* Lorsque le vhicule s'arrte les feux avant et arrire s'teignent. Piles et batterie au lithium fournis:
2 piles AA pour la radiocommande (fournies). Une batterie au lithium-ion incorpore au vhicule avec un cable USB pour le chargement (fournis). La radiocommande:
Insrer 2 piles AA (LR6) dans le compartiment a piles situ a l'arrire de la radiocommande. S'assurer que les piles soient correctement installes en respectant le ple positif (+) et le pdle ngatif (-). La radiocommande se synchronise automatiquement avec le vhicule. Le vhicule est quip de la technologie 2,4 GHz qui permet d'utiliser jusqua 6 vhicules en mme temps. Chargement de la batterie du vhicule avec un cable USB
(fourni):
Avant de commencer a charger la batterie, vrifier que le l'interrupteur ON/OFF situ sous ie vhicule est bien en position OFF. Ouvrir le compartiment du cable USB situ sous le vhicule. Faire attention quand vous droulez le cable. Ne pas tirer sur le cable. Connecter le cable USB a un ordinateur ou a un chargeur USB (non fourni). Durant le chargement. le tmoin iumineux de |'tat de charge sallume. La lumire s'teint aprs une charge compite. (Le chargement complet a partir d'un ordinateur dure environ 1,5 a 2 heures). Levier de direction:
Ajustez le levier de direction situ sous le vhicule entre les deux roues avant. IMPORTANT!
La batterie au lithium-ion incorpore au vhicule n'est que partieliement charge, il est recommand de la charger compitement avant la premire utilisation. Prcautions:
Les chargeurs utiliss avec le jouet doivent tre contrls rgulirement en particulier le cable, la prise, ainsi que les autres lments du jouet. Si une anomalie est constate, le jouet ne doit pas tre utilis avec ce cable de recharge tant qu'il ne soit pas rpar. Notes:
Le vhicule fonctionne sur une distance de 25-30 mtres. Eteindre le jouet lorsqu'il nest pas utilis Retirer les piles AA (LR6) de la radiocommande en cas de non utilisation pendant de tongues priodes. Si le vhicule ne fonctionne pas correctement, vrifier les piles et contrler que la batterie du vhicule soit compltement charge. La prsence dun adulte est recommande Eniever toutes les pices de Iemballage avant de donner ce jouet a votre enfant. Ne pas insrer le cable USB dans !es prises de courant lectrique. Ne pas utiliser !e cable USB incius a des fins autres que la recharge de ce vhicule. Ladaptateur secteur USB n'est pas fourni 10.Pour protger la batterie et prolonger sa dure de vie, ne pas surcharger !e vhicule. 11.Le jouet ne doit tre connect qua un quipement de classe II portant ce symbole. |O}
La performance de rception peut tre affecte dans un environnement de fortes interfrences. Ce produit ne tonctionnera pas normalement dans un environnement lectrostatique lev. Nous vous souhaitons beaucoup dheures de plaisir avec votre nouveau jouet de la marque New Bright NEW BRIGHT JN196-19 FCC CAUTION:
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. This device complies contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation-of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) Lappareil ne doit pas produire de brouillage; (2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement.
(cutis NEW BRIGHT L948177021/JN216-14