AUcueui cee Features and Functions Press to hear : : Press for Engine sound. Press again | sounds & movement. for mute. : : Press Engine will only have 1 Movement while Press
| Mute. _ Sours wil continue as long as car is active. Press agaln to tun off the sounds. Press start to reactivate sounds. :
Forward/Reverse Driving Note:
Vehicle has working lights & shaking engine. When driving forward or reverse the lights
| will turn on and engine will shake. When stopping either in forward or reverse the lights will turn off and engine shaking will stop. This transmitter is equipped with 2.4GHz technology which allows up to 6 vehicles to be raced at the same time. The transmitter will automatically syne with the vehicle. CERO 4 QRAED PRO UNDER 8 YEA a FOR CHILDREN UNDER & YEARS 0 a DED \ F AGE LECTAICPRODUCTS, PRECAUTIONS SHO ne SERVED DURING WENDLING AND USE 10 PREVENT ELECTRIC SHOCK. INPUT: 120.AC 602 TOW, OUTPUT: 2.60 DC SOA OWNERS MANUAL Please read and understand all precautions prior to use. Thank you for choosing a premium New Bright product. USA & Canada 30-Day Limited Warranty
: New Bright industries warrants to the original purchaser thal this product will be free of defects in materials and workmanship for
: thirty (30) days from the date of purchase. in the event of such defect within the warranty period, New Bright will repair or replace the product at our sole discretion. This warranty does not cover damage resulting from unauthorized modifications, accident,
| misuse or abuse. _ Should your item have a defect covered under this warranty, first call the toll free number listed below. Most problems can be resolved in this manner. If necessary, you will be issued a Return Authorization number (RA) and instructions on how to obtain a Product Retum Form. The Product Return Form is to be used when returning a product to us (postage pre-paid and insured by __ the consumer). _ When returning a defective product, please package the product, the Product Return Form and e copy of the dated sales receipt ___as proof of purchase. Be sure to mark the RA number on the Product Return Form. If the product is returned without a dated
| sales receipt, it will be excluded from coverage under this warranty. Please allow 4 to 6 weeks for defivery of repaired or replacement vehicles (depending on your location}. New Bright industries lability for detects in materials and workmanship under this warranty shail be limited to repair or replacement at our sole discretion. in no event shall we be responsible for incidental, consequential or contingent damages
| (except in those states that do not allow this exclusion or limitation). Valid only in the USA & Canada. Contact New Bright Industries Customer Service Toll Free at:
1-877-NBL-TOYS
(4-877-624-8697) Monday through Friday, 8:00 AM to 5:00 PM Eastern Time JN132-19 po Tra Table of Contents it Battery MeVAN Firmly press TAB in the direction of the ARROW and pull back to open battery compartment cover. Section 1: Table of Contents Section 2: Component Checklist Section 3: | Removing Demo Wire Section 4: Charging the Battery Section 5: Battery Installation in Vehicle Section 6: Vehicle Features and Functions Section 7: Transmitter Battery Installation install 2 AA batteries as shown, making sure (+) and (-) markings on batteries line up with Section 8: Transmitter Features and Functions | The (4) and (-) markings in the battery compartment. Section 9: Proper Use Precautions and Care
: . i . 2 Replace battery compartment cover. Section 10: Trouble Shooting and Support | w Cover should olek whan tecked if:placa. Section 11: Cautions cing Transmitter batteries:
atieries only. old and new batleries 2, Slandard ar REF95016.26308102 ae Si a Removing Demo Wire
~ New Bright Comiponent.Checklist This vehicle is shipped with a demo wire which runs from the transmitter to the vehicle chassis. The wire is for package demonstration only and should be removed and discarded as shown here. :
Unlock and Remove battery pack before removing demo wire.
(1) R/C Vehicle |
(1) Battery Charger
(1) 9.6V Battery pack
(1) Transmitter
(2) AA Batteries Grasp and pull firmly to remove demo wire. a Remove and discard the demo wire which runs from the vehicle to the smitter. H tran Demo Wire Connection Oe . oe : aang =
Battery Installation a Features and Functions
: Ca eT WI rE fe |
ir oa 4 u eee : Wheel Alignment *
. er A (Steering Trim)
~ 1 Fe nerermotmnnon i |
Us B A Locate and align arrow on battery pack with arrow inside battery compartment. Place battery pack in battery compartment and slide battery forward in direction of arrow. Once in place, turn locking tab to keep battery pack secure.
* If vehicle pulls to the left or right during forward driving the Steering Trim may need to be
| adjusted. The Steering Trim is located on bottom of chassis between the front wheels. if battery pack is not completely in place locking tab will not fully turn. Proper Use _ Precautions and Care. Charging Status Light Battery Charger Release Button Push and Hold Button To Remove Battery 9.6V Battery Pack
1. |nsert the 9.6V Lithium lon rechargeable battery pack securely into-the charger and push up to lock. Be sure the arrows are properly matched (as shown above). 2. Plug the Charger into a standard indoor electrical outlet. This power unit is intended to be f correctly orientated in a vertical or wall mount position. =
3. Allow ni to charge for 1-1.5 Hours. Charging Status Light will be solid red while battery Switch vehicle OFF is charging. When charging is complete, light will blink green. when not in use. 4. To remove the battery, press and hold the release button and slide battery down to unlock. | -
5. Charge will last approximately 12 minutes depending on terrain and driving style. IMPORTAN | for the baltery pack to become warm after charging and/or use. Be | = Be sure to aller pack to cool before using or recharging. Recharging a warm battery i ay . Nice G pack will greatly ATTENTION PARENTS: cual fate \ AU : _ fa \, x Bs
+ The Battery Charger & Battery Pack need to be periodically examined for potential 7 Os :
hazards. Any potentially hazardous parts need to be repaired or replaced. Do not use chemicals or water to clean. Support
- Trouble Shooting & Support Problem - Vehicle does not move or moves slowly.
- Make certain there are fresh batteries in the transmitter and that they have been _ installed in the correct position.
- Are the (+) and (-) markings on the batteries in the same position as the (+) and (-) markings in the Transmitter Battery Compartment?
- Has the Battery Pack been installed in the vehicle?
- Has the rechargeable Battery Pack been fully charged?
- Are the (+) and (-) markings on the Battery Pack in the same position as the (+) and
(~) markings in the Battery Compartment?
- Are the metal contact tabs touching, rusty or dirty in the transmitter?
- Make certain that the vehicle ON/OFF switch is in the ON position. Problem - Vehicle moves by itself or exhibits reduced range from the transmitter.
- Make certain there is no outside radio interference in your area. The best way to test this is to take the vehicle as far away from radio towers, electrical lines or tall buildings as possibile to ensure no further radio interference will occur.
FCC CAUTION:
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equisment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not cecur in 2 partiuiar installation. if this equipment does cause harmful interference to radio or television reception, which ean be determined by turning the equipment off and on, the user is encouraged to try to correct the interlerence by one or more of the following measures:
Reorient or relocate the receiving antenna.
- increase the separation between the equipment and receiver.
~ Conneet the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radia/TV technician for help. Sei Cautions Do not recharge Battery Pack if it is hot or warm to the touch. Allow Battery Pack to cool before recharging. Recharging a hot or warm Battery Pack will shorten the life of the Pack. Do not recharge a Battery Pack if it appears to be damaged or leaking. Always unplug Charger when not in use. Always remove Battery Pack from Battery Compartment when not in use. Do not dispose batteries in fire. Leakage, explosion and personal injury may occur. Dispose of Lithium-ion Battery Pack properly. Do not attempt to disassemble Battery Pack or Charger. Do not use Battery Charger for any use other than instructed in this booklet. Only an adult should charge Batteries. Do not attempt jumps or tricks with this vehicle.
{ This device complies with industry Canada cence-exempt RSS standards). Operation is subject the following two conditions:
(1) this device may not cause interference, and (2) tis device must accept any interference, including interference that may cause undesired operation ofthe deve Le prsent appareil est conforme aux CNR d'industrie Canada applicables aux appareils radio exempts de licence. Lexploitation est aulorise aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de Tapareil doit accepter tout brouillage radiolectrique subi, mme si fe brouillage est susceplible den compromette lefonctionnement.