IC STATEMENT This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The device is compliance with RF field strength limits, users can obtain Canadian information on RF exposure and compliance. This Class B digital apparatus complies with Canadian ICES-003. a Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :(1) l'appareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Le prsent appareil est conforme de ce matriel aux conformits ou aux limites dintensit de champ RF, les utilisateurs peuvent sur lexposition aux radiofrquences et la conformit dacqurir les informations correspondante. Cet appareil numrique de la classe B est conforme a la norme NMB-003 du Canada. CAN ICES-3 (B)/NMB-3(B) USA & Canada 30-Day Limited Warranty New Bright Industries warrants to the original purchaser that this product will be free of defects in materials and workmanship for thirty (30) days from the date of purchase. In the event of such defect within the warranty period, New Bright will repair or replace the product at our sole discretion. This warranty does not cover damage resulting from unauthorized modifications, accident, misuse or abuse. Should your item have a defect covered under this warranty, first calbthe toll free number listed below. Most problems can be resolved in this manner. If necessary, you will be issued a Return Authorization (RA) number and instructions on how to obtain a Product Return Form. The Product Return Form is to be used when returning a product to us (postage pre-paid and insured by the consumer). When returning a defective product, please package the product, the Product Return Form and a copy of the dated sales receipt as proof of purchase. Be sure to mark the RA number on the Product Return Form. If the product is returned without a dated sales receipt, it will be excluded from coverage under this warranty. Please allow 4 to 6 weeks for delivery of repaired or replacement vehicles (depending on your location). New Bright Industries liability for defects in materials and workmanship under this warranty shall be limited to repair or replacement at our sole discretion. In no event shall we be responsible for incidental, consequential or contingent damages (except in those states that do not allow this exclusion or limitation). Valid only in the USA & Canada. S Contact New Bright Industries Customer Service Toll Free at:
1-877-NBI-TOYS
(1-877-624-8697) Monday through Friday, 8:00 AM to 5:00 PM Eastern Time REF- 8173 7102 OWNERS NANUAL Please read and understand all precautions prior to use. Thank you for choosing a premium New Bright product. JNO91-17 WHAT'S INCLUDED TRANSMITTER Component Checklist Battery Installation
. To open battery compartment cover on transmitter, slide in the direction indicated by the arrow. Insert 2 AA size batteries. Make sure the positive (+) and negative (-) markings on the batteries match up to the ones inside the Battery Compartment. be a . Replace the Battery Compartment Cover making certain that the Compartment tab has PES 5 aa 4 n* wae i sss pped he locked p Ko . snapped into the locked position. SRR seavoneconecacerarentcentcentety Mecteeniets SRRKKK ESS KA MR eI SEKKKKKK KKK KAM oe RRR KKK RR RR CM NaS Or. RK KK RRR KKK Me Se SEEK RRR RRR KR KE RTE SSRI IKI EKKO KEK OS CE BO OO oP ME eo BEB RRR RRR OR PERS SO SMR SKK KKK KM KS PIERRE a ns SL SIE OC b Re sles RRS 1 PP IL NE os BOR XXM Sai 4 24 a xX RS RS ORS:
RK RS x se
55%
I OU eee aes x ORS 5 SSSR x x se
$e x oS SS x
<e eo
<o Coe oe e x e
o BS oS KS CN Se 23 x 38 Se By
3 Rx
$6 38 ee
. x Se 8
%e HPS aS a EXXk XY RRS RXR Shy KXKXo
<9 p f ee RK er Se rit
me Note: When replacing Transmitter batteries:
Do not mix old and new batteries. Do not mix alkaline, standard or rechargeable batteries Use alkaline batteries only. Syncing This transmitter is equipped with 2.4GHz technology which allows up to 6 vehicles to be used at the same time. To sync transmitter and vehicle, follow these steps:
1. Install batteries in Transmitter. 2. Turn on Vehicle. Once the batteries are installed and the vehicle is turned on, the Transmitter will sync automatically with the vehicle.
(1) Transmitter (2) AA Batteries TRANSMITTER ma z&MYS Ten:
Functions Functions Light-Up Eyes Left Tread Control Right Tread Control Note:
Vehicle has working lights. When vehicle is powered ON, lights will glow Blue. When vehicle is in motion the lights will glow Red. When vehicle stops, lights will glow Blue again.
* Screw Hole for Compartment Cover USB Charging Cord How to Drive FORWARD AND REVERSE DRIVING FORWARD DRIVING REVERSE DRIVING Push BOTH joysticks forward Pull BOTH joysticks backward for Forward Driving. Sa for Reverse Driving. TURNING RIGHT TURNING Push LEFT joystick forward to turn right while driving forward. Pull LEFT joystick back to turn right in reverse. Charging Cord Charging Compartment Cover Status Light Charging This vehicle is equipped with an internal Lithium-lon battery that is recharged via USB. ON/OFF Switch must be in the OFF position prior to charging.
LEFT TURNING Push RIGHT joystick forward to turn left while driving forward. Pull RIGHT joystick back to turn left in reverse. 1. Locate the Charging Cord Compartment Cover on the underside of vehicle. 2. Use a screwdriver to remove the small screw keeping the cover in place. 3. Remove USB cable from the Storage Compartment. (Use care when extending cord as it is attached to inside internal battery). Cord can be plugged into any computer or USB outlet brick
(not included). 4. Insert the USB connector into a computer or other USB power source. 5. While charging, the Charging Status Light under the vehicle will be on. Once fully charged the light will turn off. Charging is completed in approximately 2 hours (when charging from a computer). 6. After charging is complete, store the USB cord in the Charging Cord Compartment. Replace the Comparment cover and screw securely back into place. FY 360 SPINS - Clockwise 360 SPINS - Counter-Clockwise Push joysticks as shown for Push joysticks as shown for Clockwise Spinning. Counter-Clockwise Spinning. PROPER USE | SUPPORT Precautions and Care Trouble Shooting Problem - Vehicle does not move or moves slowly.
- Has the rechargeable Internal Battery been fully charged?
. - Make certain there are fresh alkaline batteries in the transmitter and that they Do not use chemicals Brush areas where Switch vehicle OFF have been installed in the correct position. ae Goes ee when pees. - Are the (+) and (-) markings on the alkaline batteries in the same position as the
(+) and (-) markings in the Transmitter Battery Compartment?
DO NOT - Make certain that the vehicle ON/OFF switch is in the ON" position. DO.NOT < ee =, DRIVE ON LEAVE : Ee SAND Siesun PN} _ Problem - Vehicle moves by itself or exhibits reduced range from the transmitter.
- Make certain there is no outside radio interference in your area. The best way to test this is to take the vehicle as far away from radio towers, electrical lines or tall buildings as possible to ensure no further radio interference will occur. DO NOT RUN INTO HARD OBJECTS CAUTION!
Do not recharge Internal Battery if vehicle is hot or warm to the touch. Allow Battery to cool before recharging. Recharging a hot or warm Battery will shorten the life of the unit. aoe CAPS Changes or modifications not expressly approved by the party responsible for compliance Do not recharge the Internal Battery if it appears to be damaged or leaking. could void the user's authority to operate the equipment. Always store charging cord in storage compartment when not in use. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
: . against harmful interference in a residential installation. This equipment generates, uses and can Do not attempt to disassemble or remove Internal Battery or charging cord. radiate radio fraguenicy energy and, if not installed and used in accordance with the instructions,
. may cause harmful interference to radio communications. However, there is no guarantee that Only an adult should charge Batteries. interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment Do not attempt jumps or tricks with this vehicle. off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Do not dispose batteries in fire. Leakage, explosion and personal injury may occur.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.