FCC ID: G6D31HHW TOY Transmitter

battery Instaliation ey ee

(. _ .| lz 3) | OWNERS hale icing Thank you for choosing a premium New Bright product. Note: When replacing Transmitter batteries Use alkaline batteries only. Do not mix old and new batteries Do not mix alkaline, standard or rechargeable batteries. USA & Canada 30-Day Limited Warranty New Bright Industries warrants to the original purchaser that this product will be free of defects in Featu res and Fu nctions materials and workmanship for thirty (30) days from the date of purchase. In the event of such defect within the warranty period, New Bright will repair or replace the product at our sole discretion. This shamauwaneitay: lammhin: purik- diahinie sisarvinisies tame leaks tiriits- deed acne cnntinatisnn noskiiaed +rdnine te ahi Should your item have a defect covered under this warranty, first call the toll free number listed below.

() Most problems can be resolved in this manner. If necessary, you will be issued a Return Authorization i~ / number (RA) and instructions on how to obtain a Product Return Form. The Product Return Form is to be used when returning a product to us (postage pre-paid and insured by the consumer). When returning a defective product, please package the product, the Product Return Form and a copy of the dated sales receipt as proof of purchase. Be sure to mark the RA number on the Product Return

( __\ Form. If the product is returned without a dated sales receipt, it will be excluded from coverage under this warranty. Please allow 4 to 6 weeks for delivery of repaired or replacement vehicles (depending on your a rend location). Drive Steering INOW DIGI HIQUSUIeS HADIY TOF Creel. IT Tate rials alla WOTRITNANSIP UGE! US Walrarhy silall OS limited to repair or replacement at our sole discretion. In no event shall we be responsible for incidental, consequential or contingent damages (except in those states that do not allow this exclusion or limitation). wats Po ee SSE VEY EE CS VU S yee This transmitter is equipped with 2.4GHz technology which allows up to 6 ontae: New Brat ncuenes Cusine: cence 108 Freee:

{1-R277-ROA-RRO7\

a es ae) |e VOTNRICS WW Ue TACO ALIS oa ie UNG, hn moe Ae es Monday through Friday, 8:00 AM to 5:00 PM Eastern Time U.S. Toy Sales and Marketing Co. Inc. i s . 30260 Oak Creek Drive 2nd Fi The transmitter will automatically sync with the vehicle. tical bh aha Sl 1-877-624-8697 http:/www.newbright.com/

] 6 | Precautions and Care 1 | 7 ] Trouble Shooting & Support Problem - Vehicle does not move or moves slowly.

- Make certain there are fresh alkaline batteries in the transmitter and that they have been installed in the correct position.

- Are the (+) and () markings on the alkaline batteries in the same position as the (+) and () markings in the Transmitter Battery Compartment?

- Are the metal contact tabs touching, rusty or dirty in the transmitter?

- Has the vehicle been fully charged?

1D La rr | | - Make certain that the vehicle ON/OFF switch is in the ON position. Bue

=. Me || il = MA Problem - Vehicle moves by itself or exhibits reduced ranae from the transmitter. way to test this is to take the vehicle as far away from radio towers, electrical lines or tall buildings as possible to ensure no further radio interference

- Make certain there are no outside radio interference in your area. The best |

oe will occur. Alwave ramnva Rattoriac fram trancmitar whan not in tica eee ee ee ee ee eae Pe Ty ee ee tee Do not dispose batteries in fire. Leakage, explosion and personal injury may occur. Ra nant atamn? pimne ar triable iunth thie wahkhizala a ES ee eee ee eee ee! ee ee a Se ee eee a a Do not attempt to remove internal battery. Do not use included USB cord for anything other than its intended purpose. Lg Sea, TO DSRNA es ER ev I fais CRN Ree AEE 52 Nn aN) See FUNAYS ROSH MUIR VU OIUTOU WUE ISEE PIE BE Mote x : Adult supervision recommended. Switch vehicle OFF Brush areas where FCC CAUTION:

VAR AAT Nos dirt nate trannad Changes or modifications not expressly approved by the party responsible for compliance bot ied da tt secede decry fincoece tees od weathers could void the user's authority to operate the equipment This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

PET ee a, NE (CE a, a ec i Se | ae aC pees MINERAL MNES ee eS Ee ee wae interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential iaieliaiinns Thin arsininnnd feannetian rene Andel Can carkahen ratie fearaaerel ndates anh if ord lnaialad and ime ES Oe LE Oe ee ee, Tee ee Ce. a, ee Te re:

Sara" : di BLE

| ui] accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Engl! MD TD Wipe body with a Do not use chemicals : Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. soft rag or tact cloth. or water to clean. ~ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

TAVIC Ol UOTILETILS | C4 VOIIPOMEMIt UMCCAlot

| Section1: Table of Contents

| Section 2: | Component Checklist

| Section 3: Vehicle Features & Functions e (1) R/C Vehicle With USB Cord

| Cartian A: Charaninn tha Ratary

| www thwit te ee ee ee e (1) Transmitter

, , pees f Reeeee | 6 ee |S ee =e De pean. Ae) | Vier 7 [eee VOCUUUTT J. TAHOHtler DAllery Hlotalalivll

| Transmitter Features & Functions (2) AA Batteries

| Section 6: Proper Use Precautions & Care

| Section7: Trouble Shooting & Support Faatiirae and Fiinctinne Charninn the Ratary Oh oe ee ne en) ae ee eS Ne a ee a ey argh Se reer ARNT Gee wim atoms ai rac ert cel Cg |

This vehicle is equipped with an internal Lithium- lon battery that i is recharged via VOB. UNUFPF oWIiich must De in the Urr position prior to Charging. USB Charging Cable J = _ | ey y, ana otO0rage VOMpahtinent

| \ | al; L/ 1. Locate the ON/OFF switch and USB cord on the under-side of the eet VOTH. 2. Turn the ON/OFF switch to the OFF position. Ve VIVE OWAYS YVUINPAUHGIit VOVET,

| Phy | 4. Remove USB cable from the Storage Compartment. (Use care when ra extending cord as it is attached to inside internal batterv). Cord can be ig LS | plugged into any computer or USB outlet brick (not included). Charne ON/OEFE Cwitch oe TR Beceem - ames Status Light 9. Wile Charging, tle Lew unger tle VEniCie Witt De OF. UNCe luny Charged the LED will turn off. Charging is completed in approximately 40 minutes. Return cord and secure storage lid before operating the vehicle.

* If vehicle pulls to the left or right during forward driving the Wheel Alignment may need to be adjusted. The Wheel Alignment Dial is located on bottom of phancaia hatsaam tha fea wshaaila NOE RRR RNR E SE Ne PPE ES EE Nr ie

FCC CAUTION:

Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. This device complies contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). 4 Operation is subject to the following two conditions: (1) This device may not cause Zo. interference; and (2) This device must accept any interference, including interference that R may cause undesired operation of the device. Couisinrtors Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux NEW BRIGHT CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L exploitation est autorise aux deux conditions suivantes : (1) Lappareil ne doit pas produire de brouillage; (2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. L948177021/JN216-14

FCC 1D: G6DS1HHW 2.4GHZ New Bright Made in China TWis-deviee complies wih par. 18 of tho FOC. Aion. Sperone silet 20 the Tolowing, to, cons:

ie device may not case harmful Interference, and E} this dovce mst accept any Infrteronce rected fo) his cao mst a fas) taciee Susana carat

Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject:

Request for Confidentiality FCC ID:

G6D31HHW To Whom It May Concern:

Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Company Name: New Bright Industrial Co., Ltd. Contact Name: Eric Kwok Title of Person: Quality Manager Address: New Bright Bldg 11 Sheung Yuet Road, Kowloon Bay, Kowloon Hongkong Date: 2/16/2022

Date: 02/04/2021 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To whom it may concern:

I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to:

a) comply with the relevant provisions of the certification program;

b) c) d) e) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;

make claims regarding certification only in respect of the scope for which certification has been granted;

do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;

upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;

f) g) h) i) j) use certification only to indicate the products are certified as being in conformity with specified standards;

endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;

ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division;

keep a record of all complaints made known to us relating to the products compliance with requirements of the relevant standard and to make these records available to the when requested;

take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;

k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signed by:

Company Name: New Bright Industrial Co Ltd Contact Name: Eric Kwok Title of PersonQuality Manager Address: New Bright Bldg 11 Sheung Yuet Road, Kowloon Bay Kowloon, Hong Kong