FCC ID: G6D3705HNRR2 TOY Transmitter

CONTENTS Component Checklist

(1) Vehicle

(1) Transmitter

(1) Battery Charger REF 60806 ON NCR ow Na Draw Mode Individual menu options are explained below in-depth. Sound Select Light Controls Tapping Sound Select opens the Sound Options menu. | menu. Tap to choose one of 6 sounds: Engine Rev, Accelerate, Hard Stop, Gear Shift, Tire Squeal or Horn. B 4,

Tapping Song Select opens the Song Options menu. Tap to choose one of 6 songs that will loop on repeat. Tap again to stop song playback. Save Path Load Path enol 04/26/2019]

Confirm Name & Save. Path saves as current date by default. Tap text box to edit with custom name.

(2) AA Batteries

(1) 12.8V Battery Pack Tapping Light Controls opens the Lights Options Tap to choose one of 4 options, such as Bright Lights, Dim Lights, Slow Flashing, or Fast Flashing. Delete saved path. Saved paths appear here. Tap path name to load path. App Download Additional features and functions are available and require the user to download and install the App Driver app onto a smart device to access. No charge to download. Data rates may apply. OE Runucm Apple Users:

@ App SSve)-mm Search New Bright App Driver in the App Store; Install. Cooal Android Users:

eT IEVMME Search New Bright App Driver in Android Market or Google Play; Install. App Set Up 1. Install app to device. 2. Make certain the vehicle is fully charged (See charging instructions in Recharging the Vehicle). 3. Move ON/OFF switch to the ON position (See Vehicle Features for Switch location). Vehicle lights will turn on. 4. Launch the App Driver app on your smart device. 5.When launching, the app will ask to enable a connection with your device. Select yes to continue to use the app. This allows the app and your device to communicate with the vehicle. (If a proper connection has not been made, you will be prompted to repeat steps 2-4). 6. The vehicle and app are now communicating. 7. After a connection is established, you will be notified that the control range when using the app is limited. Use the included joystick controller when longer range is needed. The App features 4 ways to control your vehicle:

1. Select Drive Mode and choose Touch to control your vehicle using the touch screen or select Tilt'* to control your vehicle using the gyroscope sensor in your device. Music, sound and light controls are also available. See instructions in Using the App. 2. Selecting Draw Mode allows you to draw a path and have the vehicle travel along that path. Music, sound and light controls are also available. See instructions in Using the App. 3. Selecting Code Mode allows you to program each segment of the vehicle's path adding sounds, music, and controlling the lights along the way. See instructions in Using the App.

*Tilt Mode Setup:

1. After selecting Tilt Mode you will be prompted to set the desired Neutral or Stop position. When your device is held at this position, the car will not move. Placing the device on a flat surface is NOT recommended for this mode. Exit Tilt Mode and start again to recalibrate. 2. Remember to exit Tilt Mode or close the app when finished or the vehicle may continue to be controlled by the movement of your device. Code Mode Code Path Mode allows you to select a sequence of directions that the vehicle will follow. Mode, Speed, Lights, Music, Save and Load options are available. Refer to the More Info section for details on these options. Load Path Loads previously saved path. Pause Back to Home Screen St hicle. Ppisy tae Save Path Tap Play to continue. Clear Path Saves Current Path. Clears the canvas. Play Start driving or resume driving the current path. EN ares cy Est Vehicle Speed Tap to select speed. Glow indicates current speed. Directions Tap for Directional Options Fuel Meter Displays vehicle battery life. Sound Select Tap for Options Light Controls Tap for Options Home Takes user to Song Select Light Input Sound Input Directional Input Home screen. Tap for Options Field Field Field Below is an example of a coded path. Pract) Ete To code a path, tap the Directions Icon to open the Directional Options Menu. Tap or drag and drop desired directions in the Directional Input Field. Choose from the following directions:

Reverse Left Right Circle Drive A Turn *| Tum uaa Turn Add Sounds by opening the Sound Options Menu and dragging a sound to your desired location in the Sound Input Field. Open the Light Control Menu and drag the desired option into the Light Input Field to adjust the lights. To move an item to a different location, tap and hold for 2 seconds, then drag to desired location. To remove an item, tap and hold, then drag it off of the canvas. NCR ea 6 |

ON NCR wa ecole A=o18 Below is the App Home Screen. Start by Selecting the Vehicle you have. When the image of your vehicle is displayed you can then select a mode from the 3 mode options on the left. Selected Vehicle

; > Music Select Seed Tap to open. rTSPeILT ELI App comes pre-loaded with 2 Penta a default songs. UL Ae User can choose Mode Select bonis ia up to 6 songs from music that is stored on the device. Note: Default songs can be temporarily replaced by user music but can not be deleted. Choose Vehicle Tap left & right arrows or swipe image to scroll through vehicle options. Drive Mode Drive Mode allows you to use your device to control the vehicle by Touch or by Tilt. Mode, Sound, Light and Music options are available. Refer to the More Info section for details on these options. Speedometer Displays vehicle speed

(not actual speed). Sound ON/OFF Tap to turn sound on and off. Horn Tap to honk horn. Song Select Tap to cycle through pre-loaded songs. Light Controls Tap lights ON/OFF. Glow indicates lights are ON. Fuel Meter Displays vehicle battery life. Back to Home Screen SS Pe

XO Mode Select Tap to toggle between Touch andTilt Mode. ry

KK yy; |

Left/Right Steering (Touch Mode) Press and slide finger left to turn left. Press and slide finger right to turn right. Release to stop turning. Left/Right Steering (Tilt Mode) Rotate device left to turn left. Rotate device right to turn right. Hold device straight and level to stop turning. Forward/Reverse Drive (Touch Mode) Press and slide finger upwards to drive Forward. Press and slide finger downward for Reverse Drive. Release to Stop. Forward/Reverse Drive (Tilt Mode) Tilt device forward (away from you)to drive Forward. Tilt device back (towards you) to drive in Reverse. Hold device in the Neutral (N) starting position to Stop Driving. RANSMITTER Battery Installation 1. Flip smart phone holder up to reveal battery compartment. 2. Press and slide in the direction of the arrow open battery compartment cover. 3. Insert 2 AA size batteries. Make sure the positive (+) and negative

() markings on the batteries match the markings inside the Battery Compartment. 4. Replace the Battery Compartment Cover making certain that the Compartment tab has snapped into the locked position. Note: When replacing Transmitter batteries:

Do not mix old and new batteries. Do not mix alkaline, standard or rechargeable batteries. Use alkaline batteries only USING The APP Draw Mode Draw Path Mode allows you to use your finger to draw any path on the screen and the vehicle will drive that path. Speed, Lights, Music, Save and Load options are also available. Refer to the More Info section for details on these options. Back to Home Screen Pause Load Path Stops vehicle. Loads previously Tap Play to continue. i:

fap Play to continue. Clear Path saved path. Clears the canvas. Save Path Saves Current Path. Play Vehicle Speed Start driving or Tap to select resume driving the speed. current path. C Pact Glow indicates current speed. Sound Select Tap for Options Fuel Meter Displays vehicle battery life. Light Controls Tap for Options Home Takes user to Home screen. Song Select Tap for Options. Tap desired song to begin playing. Tap again to stop. Drag your finger over the canvas to produce a path the vehicle will follow. TRANSMITTER Features and Functions Light Press once to turn on light. Smart Phone Holder Press again to turn off. Forward/Reverse Left/Right This transmitter is equipped with 2.4GHz technology which allows up to 6 vehicles to be raced at the same time. Once vehicle and transmitter batteries have been correctly installed and vehicle ON/OFF Switch is in the ON position, the transmitter will automatically sync with the vehicle. Smart Phone Holder Locate the Smart Phone Holder at the back of the transmitter. Flip forward into the upright position. Next, gently pull up on the clamp while sliding phone in. Release clamp when phone is in place. f

YAM De VG Charging the Battery IMPORTANT!

The included 12.8V Lithium lon battery pack is only PARTIALLY CHARGED prior to shipment and it is recommended the battery be fully charged before first use. Charging Status Light Battery Charger Release Button Push and Hold Button To Remove Battery 12.8V Lithium lon Battery Pack 1. Plug the Charger into a standard indoor electrical outlet. This power unit is intended to be correctly orientated in a vertical or wall mount position. 2. Insert the 12.8V rechargeable battery pack securely into the charger (as shown above). Be sure the arrows are properly matched. 3. Charging Status Light will be solid red while battery is charging. When charging is complete, light will blink green. 4.Charge will last approximately 10-12 minutes depending on terrain and driving style. IMPORTANT: Itis normal for the battery pack to become warm after charging and/or use. Be sure to allow the battery pack to cool before using or recharging. Recharging a warm battery pack will greatly reduce the battery life. ATTENTION PARENTS:

The Battery Charger & Battery Pack need to be periodically examined for potential hazards. Any potentially hazardous parts need to be repaired or replaced. PROPER USE Precautions & Care Switch vehicle OFF when not in use. Brush areas where dirt gets trapped. Wipe a with a soft rag or cloth. Do not use chemicals or water to clean Ey VEHICLE 12| BU are) a Battery Installation Trouble Shooting 90% of all difficulties experienced with radio controlled vehicles are due to either weak batteries or batteries that have been installed incorrectly. When batteries become weak, the vehicle may not necessarily stop completely but may exhibit slow response, slow speed or erratic behavior. Problem - Vehicle does not move or moves slowly.

- Make certain there are fresh alkaline batteries in the transmitter and that they have been installed in the correct position.

- Are the (+) and (-) markings on the alkaline batteries in the same position as the (+) and

(-) markings in the Transmitter Battery Compartment?

- Has the Battery Pack been installed in the vehicle?

- Has the rechargeable Battery Pack been fully charged?

- Are the (+) and (-) markings on the Battery Pack in the same position as the (+) and (-) markings in the Battery Compartment?

- Are the metal contact tabs touching, rusty or dirty in the transmitter?

- Make certain that the vehicle ON/OFF switch is in the ON position. Problem - Vehicle moves by itself or exhibits reduced range from the transmitter.

- Make certain there is no outside radio interference in your area. The best way to test this is to take the vehicle as far away from radio towers, electrical lines or tall buildings as possible to ensure no further radio interference will occur. 10] MAY Ite:

fej SUPPORT Features and Functions O ON/OFF Switch WWW SSSASN QO \\ Battery Compartment 7 EU Oto

* If vehicle pulls to the left or right during forward driving the Steering Trim may need to be adjusted. The Steering Trim is located on bottom of chassis between the front wheels. Cautions Do not recharge Battery Pack if it is hot or warm to the touch. Allow Battery Pack to cool before recharging. Recharging a hot or warm Battery Pack will shorten the life of the Pack. Do not recharge a Battery Pack if it appears to be damaged or leaking. Always unplug Charger when not in use. Always remove Battery Pack from Battery Compartment when not in use. Do not dispose batteries in fire. Leakage, explosion and personal injury may occur. Dispose of Rechargeable Battery Pack properly. Do not attempt to disassemble Battery Pack or Charger. Do not use Battery Charger for any use other than instructed in this booklet. Only an adult should charge Batteries. Do not attempt jumps or tricks with this vehicle. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turing the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

~Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC CAUTION:

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. a Bach 5]

CATER PD NOT RECOMENDED FOR CHLOREN UNDER 8 EARS OF AGE AS WITH ii ELECTAIC TAA PRECAUTIONS a

(I bE OBSERVED DURING HANDLING AND USE 70 PREVENT ELECTRIC SHOCK, ie TOV AC 602 10M. OUTPUT: 128V DG S00mA, ise ee OWNERS MANUAL Please read and understand all precautions prior to use. Thank you for choosing a premium New Bright product. JN172-21 Warranty Information USA & Canada 30-Day Limited Warranty New Bright Industries warrants to the original purchaser that this product will be free of defects in materials and workmanship for thirty (30) days from the date of purchase. In the event of such defect within the warranty period, New Bright will repair or replace the product at our sole discretion. This warranty does not cover damage resulting from unauthorized modifications, accident, misuse or abuse. Should your item have a defect covered under this warranty, first call the toll free number listed below. Most problems can be resolved in this manner. If necessary, you will be issued a Return Authorization number (RA) and instructions on how to obtain a Product Return Form. The Product Return Form is to be used when returning a product to us (postage pre-paid and insured by the consumer). When returning a defective product, please package the product, the Product Return Form and a copy of the dated sales receipt as proof of purchase. Be sure to mark the RA number on the Product Return Form. If the product is returned without a dated sales receipt, it will be excluded from coverage under this warranty. Please allow 4 to 6 weeks for delivery of repaired or replacement vehicles (depending on your location) New Bright Industries liability for defects in materials and workmanship under this warranty shall be limited to repair or replacement at our sole discretion. In no event shall we be responsible for incidental, consequential or contingent damages (except in those states that do not allow this exclusion or limitation) Valid only in the USA & Canada. Contact New Bright Industries Customer Service Toll Free at:

1-877-NBI-TOYS

(1-877-624-8697) Monday through Friday, 8:00 AM to 5:00 PM Eastern Time U.S. Toy Sales and Marketing Co. Inc. 30260 Oak Creek Drive 2nd Floor Wixom MI 48393 1-877-624-8697 hitp:/www.newbright.com/

FCC CAUTION:

Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. This device complies contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). 4 Operation is subject to the following two conditions: (1) This device may not cause Zo. interference; and (2) This device must accept any interference, including interference that R may cause undesired operation of the device. Couisinrtors Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux NEW BRIGHT CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L exploitation est autorise aux deux conditions suivantes : (1) Lappareil ne doit pas produire de brouillage; (2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. L948177021/JN216-14

This device complies with part 15 of the FCC Rules.

(ined is subject to the eT ae conditions:

i}

'1) this device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.

Date: 02/04/2021 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To whom it may concern:

I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to:

a) comply with the relevant provisions of the certification program;

b) c) d) e) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;

make claims regarding certification only in respect of the scope for which certification has been granted;

do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;

upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;

f) g) h) i) j) use certification only to indicate the products are certified as being in conformity with specified standards;

endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;

ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division;

keep a record of all complaints made known to us relating to the products compliance with requirements of the relevant standard and to make these records available to the when requested;

take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;

k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signed by:

Company Name: New Bright Industrial Co Ltd Contact Name: Eric Kwok Title of PersonQuality Manager Address: New Bright Bldg 11 Sheung Yuet Road, Kowloon Bay Kowloon, Hong Kong

Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject:

Request for Confidentiality FCC ID:

G6D3705HNRR2 To Whom It May Concern:

Schematic Diagram Block Diagram Theory of Operation Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Company Name: New Bright Industrial Co., Ltd. Contact Name: Eric Kwok Title of Person: Quality Manager Address: New Bright Bldg 11 Sheung Yuet Road, Kowloon Bay, Kowloon Hongkong Date: 1/20/2022