LTALAEE TTT |
IWNERS MANUAL Please read and understand all precautions prior to use. Thank you for choosing a premium New Bright product. Model No. / Modle : GF31HA Uy. Or Lar- ef) Rm M UCR ar Ley New Bright Industries warrants to the original purchaser that this product will be tree of defects in materials and workmanship for thirty (30) days from the date of purchase. In the event of such defect within the warranty period, New Bright will repair or replace the product at our sole discretion. This warranty does not cover damage resulting from unauthorized modifications, accident, misuse or abuse. Should your item have a defect covered under this warranty, first call the toll free number listed below. Most problems can be resolved in this manner. If necessary, you will be issued a Return Authorization number (RA) and instructions on how to obtain a Product Return Form. The Product Return Form is to be used when returning a product to us (postage pre-paid and insured by the consumer). When returning a defective product, please package the product, ihe Product Return Form and a copy of the dated sales receipt as proof of purchase. Be sure to mark the RA number on the Product Return Form. If the product is returned without a dated sales receipt, it will be excluded from coverage under this warranty. Please allow 4 to 6 weeks for delivery of repaired or replacement vehicles (depending on your location). New Bright Industries liability for defects in materials and workmanship under this warranty shall be fimited to repair or replacement at our sole discretion. In no event shall we be responsible for incidental, consequential or contingent damages (except in those states that do nat allow this exclusion or limitation). Valid only in the USA & Canada, Contact New Bright Industries Customer Service Toll Free at:
1-877-NBLTOYS
(1-877-624-8697) Monday through Friday, 8:00 AM to 5:00 PM Eastern Time
. UAJN117-15 New Bright Section 1:
Section 2:
Section 3:
Section 4:
Section 5:
Section 6:
Section 7:
Table of Contents Table of Contents Component Checklist Vehicle Features and Functions Charging the Battery Transmitter Battery Installation Transmitter Features and Functions -
Proper Use Precautions and Care Trouble Shooting & Support Mee ee eee Um ecUl eM [Alcea eek) standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must lel eMC ee Le eM ea ea Mm Naas undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter dout brouillage radiolectrique subi, mme si PAC le Reel eM al See eR tea tase oO o 3 3 3 o 3
QO
x g
=a
w
=. To}
Con Features and Functions ON/OFF Switch USB Cord Winder Wheei Alignment USB Connector Holder
* If vehicle pulls to the Jeft or right during forward driving the Wheel Alignment may need to be adjusted. The Wheel Alignment Dial is located on bottom of chassis between the tront wheels. ileal uk Reliable ae Re ee eee RRR ee mee Buh alge oR USB. ON/OFF Switch must be in the OFF position prior to charging. ON/OFF Switch USB Cord Winder Charging Status USB Connector Holder 1. Locate the USB Connector in the holder on the under-side of the vehicle and gently pry to dislodge it. 2. Locate the USB Cord Winder knob, turn knob to wind or unwind the cable. 3. Insert the USB Connector into a computer or other USB power source. 4. While charging, the Charging Status Light under the vehicle will be on. Once fully charged the light will turn off. Charging is completed in approximately 45-50 minutes
(when charging from a computer). 5. After charging is completed, store the USB cord by feeding the cord into the cord winder while turning the knob. Replace the USB Connector in the holder by pressing it into place. Do not operate vehicle while the USB Connecter is not in the holder. Transmitter Battery Installation
e ry r A MCG search lh cise Use alkaline batteries only. Do not mix oid and new batteries. Do not mix alkaline, standard or rechargeable batteries. Features and Functions enc ed oats ect-) Tac: ) This transmitter is equipped with 2.4GHz technology which allows up to 6 Moines TB om ole Eesla eRe =Mce ale R ttt ek The transmitter will automatically sync with the vehicle. MCcrercVOOee-UOMOrU-wE.:
Switch vehicle OFF SYA aMsc CMT RGIS mae e ROS d dirt gets trapped. Toy a ekere Tee Do not use chemicals soft rag or tact cloth. or water to clean. NOTE: This equipment has been tested and found to comply with FCC Rules. These limits are designed to provide reasonable instalation. This equipment generates, uses and can radiat accordance with the instructions, may cause harmful interference to radio that interference wit not occur in @ particular installation. Hf this equipment television reception, which can be determined by tuming th the interference by one of more of the following measures:
receiving antenna. between the equipment and receiver. into an outlet on a circuit different from Trouble Shooting & Support Problem - Vehicle does not move or moves slowly.
- Make certain there are fresh alkaline batteries in the transmitter and that t=) have been installed in the correct position.
- Are the (+) and () markings on the alkaline batteries in the same position as the (+) and (-) markings in the Transmitter Battery Compartment?
- Are the metal contact tabs touching, rusty or dirty in the transmitter?
- Has the vehicle been fully charged?
- Make certain that the vehicle ON/OFF switch is in the ON position. Problem - Vehicle moves by itself or exhibits reduced range from the transmitter.
- Make certain there are no outside radio interference in your area. The best way to test this is to take the vehicle as far away from radio towers, electrical lines or tall buildings as possible to ensure no further radio interference will occur. Always remove Batteries from transmitter when not in use. Do not dispose batteries in fire. Leakage, explosion and personal injury may occur. Do not attempt jumps or tricks with this vehicle. Do not attempt to remove internal battery. Do not use included USB cord for anything other than its intended purpose. Always keep USB cord stored when not in use. Adult supervision recommended. FCC CAUTION:
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. the limite for a Class 6 digital device, pursuarit to Part 15 of the protection against harmful interference in a residential See ee ne Meteo k kl oni) communications. However, there is no guarantee fee eT ale te Bent keg 8 equipment off and on, the user is encouraged to try to correct
. Fle)
- Increase the separation
- Connect the equioment een eRe keep lol
+ Coneutt the dealer or an experienced radio/TV technician for help.