FY-35 User Manual Thank you for purchasing Bluetooth Mini Speaker from us. Please read the following instructions to learn how to configure and use more effectively your product. Product Overview 1 Luminous body 2 Hole for wearing rope 3 LED light controller 4 Forth/Volume up 5 Play/Pause/Mode The hole is for wearing rope a. Short press to change led light mode, there are 6 LED light mode in total b. Long press to turn on/off led light. a. Short press to move to next track or station. b. Long press to increase volume. a. Short press: to play or pause. Under Bluetooth mode, to receive or reject incoming calls. b. Long press: to transfer from Bluetooth to TF card/AUX mode. c. Twins speaker feature: Two devices are under one of them to pair bluetooth mode, double-click each other spontaneously, user could connect twins speaker by cellphone bluetooth after both devices pair each other successfully.
(Note: Be patient, it will take time for first pairing twins feature.) Keep pressing the key 3S to turn on/off the speaker. Blue light on when it powers on. a. Short press to go back to last track. b. Long press to decrease volume. 6 Power on/off 7 Back/Volume down 8 Micro USB charging port 9 Microphone 10 USB connector 11 TF card connector
Charging indicator
Aux Connector
Speaker net TF Card Mode Turn on the speaker, plug in TF card in the slot, it begins streaming music. Press the key to play/pause;
press the key to go back to last track or decrease volume; press the key to move on to next track or increase volume. Bluetooth Mode Turn on speaker. Bluetooth works spontaneously, searching previous pairing Bluetooth set. If the speaker fails to link, it starts pairing other Bluetooth devices. In this case, turn on your Bluetooth device to search the speaker. (The PIN code is 0000). Please choose bluetooth pairing name xxxx from the list of found devices. Music streams after pairing successfully. Should there is incoming call, you can short press to receive or reject. Double-click to re-dial last call. AUX Mode Plug one end of 3.5mm cable into AUX slot of the speaker and the other end into audio slot of Mobile Phone, Notebook, Tablet PC, MP3/MP4 Player etc. After that, youll be able to enjoy the music. Charging Plug the charging cable into Micro USB slot of the speaker, USB slot of PC or other USB slot of chargers to get charged. When the speaker is being charged, indicator light turns red. Once it is fully charged, indicator light turns off. (Wed suggest users turning off the speaker while charging. It takes longer time to get completely charged if the speaker works when being charged.) Warnings 1. If the speaker cannot be turned on after pressing the POWER key, or it turns off on turning on, the user shall check whether it is powerful. If its out of power, please get it charged and try again later. 2. Please do not increase the volume of your Mobile Phone, PC, MP3/MP4 Player, CD, DVD etc to a large extend, or sonic boom or sound distortion may occur. In case of sonic boom or sound distortion, please decrease volume either of Mobile Phone, PC, MP3/MP4 Player, CD, DVD or the speaker. The sound gets normal soon. If Bluetooth device of Mobile Phone, PC etc fails to link to the speaker or if fails to playing music after being connected, the user shall check if he/she enters the correct PIN code or if Bluetooth device of his/her Mobile Phone, PC etc supports A2DP. 3. Sound Track Function Bluetooth Power Supply Battery Output Frequency Technical Information Mono TF Card, AUX, Bluetooth, LED V4.2 DC 5V,lithium battery 3.7V 2000MAH lithium battery 5W 150Hz-18KHz Diameter of Loudspeaker Charging time Playing time Anti-magnetic function Material 52mm Around 2-3 hours Around 6-10 hours Available PC + ABS plastic FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the users authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.