There are three LEDs on Cel-Fi COMPASS. These lights indicate if the device is:
Antenna Ports Optimization Features LEDs
Optimization Features the Performing a Site Survey SIGNAL REPORT Press the Start Test button. The unit will gather data and present the results after a few minutes. The scanning process will be quicker and more accurate when a SIM card is installed. SPEED TEST Press Start Test button. The Cel-Fi COMPASS will gather data for several minutes and display the results in a report format.*
SERVING CELL REPORT The Serving Cell Report is a live reading of the current Network Carrier of the SIM card inserted into the Cel-Fi COMPASS. The data will constantly refresh while on the page.*
*These features requires a SIM card to operate. Antenna Positioning Signal Report Speed Test
Solid green: device has power, is charged and the power adaptor is connected Blinking green: device is busy processing and is currently charging Solid red: there is a problem with the device Blinking red: the battery is low Copyright 2019 by Nextivity, Inc, U.S. Patents pending. All rights reserved. The Nextivity and Cel-Fi logos are registered trademarks of Nextivity Inc. All other trademarks or registered trademarks listed belong to their respective owners. Designed by Nextivity Inc in California. qsg_compass_eng_19-1106 Rugged rubberized exo-skeleton SMA connectors Internal rechargeable battery (all day use)
Band Support:
LTE FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28 LTE TDD: B38/B39/B40/B41 UMTS: B1/B2/B4/B5/B6/B8/B19
Micro USB charger Internal global LTE modem SIM slot (user accessible)
Connects to smartphone via Bluetooth There are three LEDs on Cel-Fi COMPASS. These lights indicate if the device is:
Antenna Ports Optimization Features LEDs
Optimization Features the Performing a Site Survey SIGNAL REPORT Press the Start Test button. The unit will gather data and present the results after a few minutes. The scanning process will be quicker and more accurate when a SIM card is installed. SPEED TEST Press Start Test button. The Cel-Fi COMPASS will gather data for several minutes and display the results in a report format.*
SERVING CELL REPORT The Serving Cell Report is a live reading of the current Network Carrier of the SIM card inserted into the Cel-Fi COMPASS. The data will constantly refresh while on the page.*
*These features requires a SIM card to operate. Antenna Positioning Signal Report Speed Test
Solid green: device has power, is charged and the power adaptor is connected Blinking green: device is busy processing and is currently charging Solid red: there is a problem with the device Blinking red: the battery is low Copyright 2019 by Nextivity, Inc, U.S. Patents pending. All rights reserved. The Nextivity and Cel-Fi logos are registered trademarks of Nextivity Inc. All other trademarks or registered trademarks listed belong to their respective owners. Designed by Nextivity Inc in California. qsg_compass_eng_19-1106 Rugged rubberized exo-skeleton SMA connectors Internal rechargeable battery (all day use)
Band Support:
LTE FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28 LTE TDD: B38/B39/B40/B41 UMTS: B1/B2/B4/B5/B6/B8/B19
Micro USB charger Internal global LTE modem SIM slot (user accessible)
Connects to smartphone via Bluetooth LED Board
(Power, Status, Charging) Power Button USB Port RJ45 Port SIM Port LED Board
(Power, Status, Charging) Power Button USB Port RJ45 Port SIM Port Cel-Fi COMPASS Quick Start Guide Box Contents:
Cel-Fi COMPASS unit Quick Start Guide WHIP antenna Power supply (charger) Soft Case Adapter pigtails (N and QMA) Cel-Fi COMPASS is Nextivitys site survey and installation tool to allow integrators to install and optimize a Cel-Fi QUATRA without the need for local Internet Cel-Fi Connectivity. The UI for Cel-Fi COMPASS is Cel-Fi WAVE PRO. Main Features Installation support for Cel-Fi Assess signal quality on site Site Survey Antenna aiming Cel-Fi QUATRA OFFLINE TOOL (replacement) Cel-Fi COMPASS Quick Start Guide Box Contents:
Cel-Fi COMPASS unit Quick Start Guide WHIP antenna Power supply (charger) Soft Case Adapter pigtails (N and QMA) Cel-Fi COMPASS is Nextivitys site survey and installation tool to allow integrators to install and optimize a Cel-Fi QUATRA without the need for local Internet Cel-Fi Connectivity. The UI for Cel-Fi COMPASS is Cel-Fi WAVE PRO. Main Features Installation support for Cel-Fi Assess signal quality on site Site Survey Antenna aiming Cel-Fi QUATRA OFFLINE TOOL (replacement) Quick Installation IMPORTANT: Your Cel-Fi COMPASS is electronic equipment. The Cel-Fi COMPASS must be kept indoors and in a dry, cool, well ventilated area. Software Update There are two modes to this feature depending on what Cel-Fi COMPASS is connected to:
Connect the Whip Antenna Connect the Whip Antenna to the MAIN port on the top of the unit. Insert SIM Card Insert an active SIM card in the slot at the bottom of the unit. MIMO MAIN Connect Cel-Fi COMPASS and Cel-Fi WAVE PRO Make sure Cel-Fi COMPASS is powered on and the Status light is solid green. 4a) Enable Bluetooth in your phone and launch Cel-Fi WAVE PRO. 4b) If a device is found, the app will automatically connect to it and proceed. If multiple devices are found, then a list is displayed and you can select which device to connect to. 4c) Enter a name for your device, If you skip this option the serial number will be the name of your device. Select Your Compass 935731000077 986214189003 922541000085 940123882101 Search Again SETUP MODE 1) Connect Cel-Fi COMPASS to the LAN using an ethernet cable. 2) In Cel-Fi WAVE PRO, select Internet then select Download Software. The app will check for updates in the cloud. An exclamation mark ! will appear if there are software updates available. Follow the instructions on the screen of your
INSTALL MODE 1) Connect Cel-Fi COMPASS to a Cel-Fi QUATRA Network Unit. 2) IP has been setup already. 3) From the main menu select Software Update, the app will display a table with the NUs and CUs attached and the current software versions. Press install Now to start the software upgrade. Download and Install Cel-Fi WAVE PRO App33 Download and install the app Cel-Fi WAVE PRO available on both smart-
phones and tablets from the follow-
ing app stores.
Download Software Type SKU NU 590NQ34TTN02TNN07BL4 CU 590NQ34TTN02TNN07BL4 Check for UPdatres
The software is ready to install. Connect the Compass to your QUATRA. SIM Card Cel-Fi COMPASS & Cel-Fi WAVE PRO are now linked and ready to operate The Cel-Fi COMPASS and Cel-Fi WAVE PRO work together to improve cellular coverage installations. AT&T 935731000077 Installation Software Update Deactivate System Customers who want to setup their Cel-Fi QUATRA
update the system software. For customers with the Cel-Fi Antenna Mount, the
to aim donor antennas. Cellular coverage reports and speed tests can be run on-site to help optimize Cel-Fi systems. Antenna Settings
network settings internal/external operator ports Band Settings offline update stop relaying relay bands IP Settings Antenna Pointing Algorithm This feature is designed to work with the Cel-Fi Mount. Make sure the Cel-Fi COMPASS is connected to the donor antenna using the SMA to N adaptor. Set the antenna to a position on the mount then press the corresponding number in the app. Wait for the app to gather data to move the antenna to next position.
Antenna Positioning
Rotate your antenna to a position on the dial mount and tap the corresponding number button. You will need to test 2 or more positions to see the results. Learn more. NOTE: Once the app has two or more data points, the app will recommend the strongest signal band Quick Installation IMPORTANT: Your Cel-Fi COMPASS is electronic equipment. The Cel-Fi COMPASS must be kept indoors and in a dry, cool, well ventilated area. Software Update There are two modes to this feature depending on what Cel-Fi COMPASS is connected to:
Connect the Whip Antenna Connect the Whip Antenna to the MAIN port on the top of the unit. Insert SIM Card Insert an active SIM card in the slot at the bottom of the unit. MIMO MAIN Connect Cel-Fi COMPASS and Cel-Fi WAVE PRO Make sure Cel-Fi COMPASS is powered on and the Status light is solid green. 4a) Enable Bluetooth in your phone and launch Cel-Fi WAVE PRO. 4b) If a device is found, the app will it and automatically connect to proceed. If multiple devices are found, then a list is displayed and you can select which device to connect to. 4c) Enter a name for your device, If you skip this option the serial number will be the name of your device. Select Your Compass 935731000077 986214189003 922541000085 940123882101 Search Again SETUP MODE 1) Connect Cel-Fi COMPASS to the LAN using an ethernet cable. 2) In Cel-Fi WAVE PRO, select Internet then select Download Software. The app will check for updates in the cloud. An exclamation mark ! will appear if there are software updates available. Follow the instructions on the screen of your
INSTALL MODE 1) Connect Cel-Fi COMPASS to a Cel-Fi QUATRA Network Unit. 2) IP has been setup already. 3) From the main menu select Software Update, the app will display a table with the NUs and CUs attached and the current software versions. Press install Now to start the software upgrade. 11 222 11 222 Download and Install Cel-Fi WAVE PRO App33 Download and install the app Cel-Fi WAVE PRO available on both smart-
phones and tablets from the follow-
ing app stores.
Download Software Type SKU NU 590NQ34TTN02TNN07BL4 CU 590NQ34TTN02TNN07BL4 Check for UPdatres
The software is ready to install. Connect the Compass to your QUATRA. SIM Card Cel-Fi COMPASS & Cel-Fi WAVE PRO are now linked and ready to operate The Cel-Fi COMPASS and Cel-Fi WAVE PRO work together to improve cellular coverage installations. AT&T 935731000077 Installation Software Update Deactivate System Customers who want to setup their Cel-Fi QUATRA
update the system software. For customers with the Cel-Fi Antenna Mount, the
to aim donor antennas. Cellular coverage reports and speed tests can be run on-site to help optimize Cel-Fi systems. Antenna Settings
network settings internal/external operator ports Band Settings offline update stop relaying relay bands IP Settings Antenna Pointing Algorithm This feature is designed to work with the Cel-Fi Mount. Make sure the Cel-Fi COMPASS is connected to the donor antenna using the SMA to N adaptor. Set the antenna to a position on the mount then press the corresponding number in the app. Wait for the app to gather data to move the antenna to next position.
Antenna Positioning
Rotate your antenna to a position on the dial mount and tap the corresponding number button. You will need to test 2 or more positions to see the results. Learn more. NOTE: Once the app has two or more data points, the app will recommend the strongest signal band 44 55 44 55
Cel-Fi COMPASS
Cel-Fi COMPASS Safety Precautions This product utilizes batteries or an external power supply (adaptor). DO NOT connect this product to any power supply or adaptor other than one described in the manual, or
This product should be used only with the components supplied.
CAUTION
WARNING: against lightning. Warranty
liable under contract, tort, strict Limitation of Liability
employees, agents, suppliers or End Users, be liability,
with respect to the Products or any other subject
used batteries promptly and as regulated by the
You MUST
FCC STATEMENT NOTE
reception, which can be determined by turning the
is connected.
Safety Precautions This product utilizes batteries or an external power supply (adaptor). DO NOT connect this product to any power supply or adaptor other than one described in the manual, or
This product should be used only with the components supplied.
CAUTION
WARNING: against lightning. Warranty
liable under contract, tort, strict Limitation of Liability
employees, agents, suppliers or End Users, be liability,
with respect to the Products or any other subject
used batteries promptly and as regulated by the
You MUST
FCC STATEMENT NOTE
reception, which can be determined by turning the
is connected.
Trademark
Disposal Notice: Should this product become
FCC Caution:
Electronic Label:
go to Main Menu > Info > Regulatory. Trademark
Disposal Notice: Should this product become
FCC Caution:
Electronic Label:
go to Main Menu > Info > Regulatory. ISED STATEMENT
[FRENCH: Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes: (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement.]
Compliance Contact
Declaration of Conformity
(FCC types K03-100-100 model The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device ID:
YETK03100100) has also been tested against this SAR limit. The highest reported SAR values for product specific (Hotspot) is 1.90 W/kg respectively. The Max simultaneous SAR is 1.95 W/kg. This device was tested for addressed extremity testing with the back of the handset kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 0mm separation distance between the user's addressed extremity and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.
Trademark
Patents
patents and patents pending.
Copyright
any means is protected by copyright and may only
. Trademark
Patents
patents and patents pending.
Copyright
any means is protected by copyright and may only
. ISED STATEMENT
[FRENCH: Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes: (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement.]
Compliance Contact
Declaration of Conformity
(FCC types K03-100-100 model The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device ID:
YETK03100100) has also been tested against this SAR limit. The highest reported SAR values for product specific (Hotspot) is 1.90 W/kg respectively. The Max simultaneous SAR is 1.95 W/kg. This device was tested for addressed extremity testing with the back of the handset kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 0mm separation distance between the user's addressed extremity and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. U.S. Headquarters: Nextivity Inc. 16550 West Bernardo Drive Bldg. 5, Suite 550 San Diego, CA 92127, USA
+1 858.485.9442 tel
+1 858.485.9445 fax
Bureau in Europe Unit 6, Basepoint Business Centre Rivermead Drive, Westlea Swindon SN5 7EX Nextivity Singapore Pte. Ltd. 2 Changi Business Park Avenue 1 Level 2 Suite 16, 486015 Singapore U.S. Headquarters: Nextivity Inc. 16550 West Bernardo Drive Bldg. 5, Suite 550 San Diego, CA 92127, USA
+1 858.485.9442 tel
+1 858.485.9445 fax
Bureau in Europe Unit 6, Basepoint Business Centre Rivermead Drive, Westlea Swindon SN5 7EX Nextivity Singapore Pte. Ltd. 2 Changi Business Park Avenue 1 Level 2 Suite 16, 486015 Singapore