FCC ID: YETCELFI-RS240CU Cel-Fi Residential System

Two power adapters. Coverage Unit Window Unit In the package you will find:

trouble shooting. regarding installation and other helpful information for an installation video and www.celfihelp.com Visit us at NEED HELP?

shooting steps included in this guide. If you have any trouble during setup, please use the trouble from your new Cel-Fi System. guide, you can optimize the installation and get the very most By spending just a few minutes using the instructions in this a Window Unit and a Coverage Unit. consists of placing and plugging in two components;

Setting up the system is extremely simple and improvements in coverage as well as 3G data rates. This Cel-Fi system is designed to provide you with significant indoor signal solution. Congratulations on your new Quick Start Guide CEL-FIRS 2 Step 1 Find the spot with the best 3G coverage:

The first step in setting up your Cel-Fi system is to find the spot in your home or office that has the best 3G coverage. This is typically by a window, and if you are in a multi-story building, upstairs windows are usually better than downstairs windows. Step 2 Plug in the Window Unit:

Take the Window Unit and one power supply out of the box (both power supplies are the same, so grab either one). Plug the Window Unit in, and check to make sure that you can see at least 1 Bar on the display in the center of the device. If you do not see at least 1 bar, try a different location. W I N D O W U N I T W I N D O W U N I T COVERAGE UNIT 420N003-001-001-10R51 The system will start working normally when it cools down. Make sure that the vents on the unit are not blocked. Move the unit to a cooler area.

(Use your cell phone to nd the best 3G coverage). Try moving the Window Unit to another room or area where you have coverage. Window Unit is overheating. Coverage Unit is overheating. No Signal on Window Unit. E4 E3 E1 Try This Problem Indicator 2. If problem persists return system for service. 1. Try resetting the Coverage Unit by unplugging it and then plugging it back in. 1. Move the Coverage Unit closer to the Window Unit. 1. Move the Coverage Unit further away from the Window Unit. Hardware Error. Red Status Indicator. from the Window Unit The Coverage Unit is Too Far to the Window Unit. The Coverage Unit is Too Close Red Too Far Indicator. 7 segment display shows a value of 0. 2.Move away from WiFi devices. 1. Wait for the display to stop cycling, this could take several minutes longer than normal to make a link. The Coverage Unit is taking than a minute. 7 segment display is cycling for more power supply is defective. 3. Try exchanging the power supplies with the Window Unit to see if the 2. Is there power at the outlet?

1.Is the unit plugged in?

There is no power. No lights on Coverage Unit display. Try This Problem Indicator coverage. (Use your cell phone to nd the best 3G coverage). 1. Try moving the Window Unit to another room or area where you have more Not receiving cell signal. status indicator on solid green. No segment lit on signal display and 2. If problem persists return system for service/replacement. 1. Try resetting the Window Unit by unplugging it and then plugging it back in. Hardware Error. Status indicator is on solid red. 1. See the Coverage Unit to determine what error code is being displayed. Error Code on Coverage Unit. Status indicator is ashing red. 1. Wait for the status indicator to stop ashing, this could take several minutes. power supply is defective. 3. Try exchanging the power supplies with the Coverage Unit to see if the 2. Is there power at the outlet?

1. Is the unit plugged in?

to complete regulatory compliance. The Window Unit unit is attempting more than a minute. Status indicator is ashing green for There is no power. No lights on Window Unit display. Try This Problem Indicator CEL-FIRS 2 Trouble Shooting MESSAGES ERROR UNIT COVERAGE UNIT WINDOW placement. Test two or three locations and for best results; try and get a 7, 8 or 9 on the display. The number shown on the side of the display gives you an indication as to the quality of the your home, so put the Coverage Unit as far away from the Window Unit as possible. The farther away you place the coverage unit from the Window unit the better the coverage in Optimize The Coverage Unit Placement Window Unit. moved closer to the Unit needs to be that the Coverage This red icon indicates TOO FAR functioning normally. Coverage Unit is indicates that the This green icon GOOD Window Unit. farther away from the needs to be moved the Coverage Unit display indicates that A zero on the numeric TOO CLOSE move the Coverage Unit closer to the Window unit. UNIT COVERAGE will illuminate indicating that you need to the Window Unit. If this happens, a red icon far away that it cannot communicate with It is possible to place the Coverage Unit so indicating that the unit is working properly. At this point you should see a green icon this could take several minutes. wait until the numeric display stops cycling, have improved coverage. Plug the Coverage unit in and Move to a location in your home where you need to Place the Coverage Unit Step 5 UNIT WINDOW signal; the more bars the better. couple of dierent spots to see if you can get better the Cel-Fi system. Try moving the Window Unit to a Unit make a signicant dierence in the operation of The number of bars you can see on the Window Optimize the Window Unit Placement Step 4 Step 3

Cel-FiTM with IntelliBoostTM Cel-FiTM with IntelliBoostTM STOP!!!

DonotcallyourcarrieruntilyouhavereadtheQuickStartGuide.If youneedmorehelp,tryvisitinghttp://www.celfihelp.com SafetyPrecautions Install Cel-Fi indoors. It should not be used outdoors. This product is designed to be used with the provided power supply. It is a listed direct plug-in power unit marked Class 2 and rated 12 Vdc, minimum 1.25A. There are no user serviceable parts inside Caution: Changes or modifications to this product not expressly approved by Nextivity may void your right to operate the equipment. Declaration of Conformity We, Nextivity, Incorporated, 12230 World Trade Drive Suite 250, San Diego, CA 92128, USA declare under our sole responsibility that the product(s):

Product Description: Cel-Fi Residential (CELFI-RS2) Models: CELFI-RS210WU and CELFI-RS210CU, CELFI-RS250WU and CELFI-RS250CU to which this declaration relate(s) is(are) in conformance with the provisions of Directive 1999/5/EC governing Radio Equipment and Telecommunications Terminal Equipment and the Mutual Recognition of their Conformity using the following standards:

SAFETY (art 3.1.a): EN 60950:2006 /A11:2009 /A1:2010 EMC: (art 3.1.b): EN 301 489-1 v1.8.1, EN 301 489-23 v1.4.1, EN 301 489-17 v2.1.1, EN 62311:2008, SAR Touch Safe RADIO SPECTUM (art 3.2): EN 301 908-1 v4.2.1, EN 301 908-11 v4.2.1, EN 301 893 v1.5.1 ___________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

(Place/Dateofissue)(nameandsignatureorequivalentmarkingofauthorizedperson) STOP!!!

DonotcallyourcarrieruntilyouhavereadtheQuickStartGuide.If youneedmorehelp,tryvisitinghttp://www.celfihelp.com SafetyPrecautions Install Cel-Fi indoors. It should not be used outdoors. This product is designed to be used with the provided power supply. It is a listed direct plug-in power unit marked Class 2 and rated 12 Vdc, minimum 1.25A. There are no user serviceable parts inside Caution: Changes or modifications to this product not expressly approved by Nextivity may void your right to operate the equipment. Declaration of Conformity We, Nextivity, Incorporated, 12230 World Trade Drive Suite 250, San Diego, CA 92128, USA declare under our sole responsibility that the product(s):

Product Description: Cel-Fi Residential (CELFI-RS2) Models: CELFI-RS210WU and CELFI-RS210CU, CELFI-RS250WU and CELFI-RS250CU to which this declaration relate(s) is(are) in conformance with the provisions of Directive 1999/5/EC governing Radio Equipment and Telecommunications Terminal Equipment and the Mutual Recognition of their Conformity using the following standards:

SAFETY (art 3.1.a): EN 60950:2006 /A11:2009 /A1:2010 EMC: (art 3.1.b): EN 301 489-1 v1.8.1, EN 301 489-23 v1.4.1, EN 301 489-17 v2.1.1, EN 62311:2008, SAR Touch Safe RADIO SPECTUM (art 3.2): EN 301 908-1 v4.2.1, EN 301 908-11 v4.2.1, EN 301 893 v1.5.1 ___________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

(Place/Dateofissue)(nameandsignatureorequivalentmarkingofauthorizedperson) Nextivity Incorporated Headquarters:

12230 World Trade Drive Suite 250 San Diego, CA 92128, USA http://www.nextivityinc.com European Office:

Whitehill Way Swindon, UK SN5 6QR Nextivity Incorporated Headquarters:

12230 World Trade Drive Suite 250 San Diego, CA 92128, USA http://www.nextivityinc.com European Office:

Whitehill Way Swindon, UK SN5 6QR Limited Warranty; Warranties This Cel-Fi (Product) is distributed by your mobile carrier, and depending on their terms and conditions of sale, you may or may not have additional rights under a warranty program for Cel-Fi. This does not affect your statutory rights. All Products must be stored, carried, processed, installed or otherwise handled or dealt with by End User and its agents in accordance with Nextivitys published instructions, and in accordance with normal safety procedures for the handling of Products, and Nextivity shall not be liable for any loss, damage, injury or expense arising out of the Products or their condition if this is not done. Nextivity shall not be liable to replace any Products rejected only on the grounds of immaterial imperfections or variations in the manufacturing process. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES WITH RESPECT TO THE PRODUCTS AND ANY DOCUMENTATION OR OTHER MATERIALS PROVIDED BY NEXTIVITY, EITHER EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, AND NONINFRINGEMENT, ALL OF WHICH ARE HEREBY DISCLAIMED. WITHOUT LIMITING THE FOREGOING, NEXTIVITY. DOES NOT WARRANT THAT THE HARDWARE WILL WORK PROPERLY IN ALL ENVIRONMENTS AND APPLICATIONS, NO PERSON IS AUTHORIZED TO REPRESENT, PROMISE OR ASSUME ANY OBLIGATION OR LIABILITY CONTRARY OR IN ADDITION TO THIS WARRANTY. Limitation of Liability In no event shall Nextivity, nor its directors, employees, agents, suppliers or End Users, be liable under contract, tort, strict liability, negligence or any other legal or equitable theory with respect to the Products or any other subject matter of this Agreement (i) for any lost profits, cost of procurement of substitute goods or services, or special, indirect, incidental, punitive, or consequential damages of any kind whatsoever or (ii) for any direct damages in excess of (in the aggregate) the fees actually received by Nextivity from End User with respect to the Products actually purchased and paid for. Intellectual Property End User agrees not to copy any product or process of Nextivity, or any part thereof, except with the express, prior written consent of Nextivity, given in its sole discretion. All risks of direct or indirect patent infringement are assumed by the End User. Nothing shall be construed as recommendation to make, use, or sell any Product or process in conflict with existing or future patents. End User shall not (and End User shall not permit anyone else to): (i) in any way reverse engineer or otherwise attempt to derive any source code or underlying ideas or algorithms from any part of the Products, except to the limited extent applicable laws specifically prohibit such restriction, (ii) modify, translate, or otherwise create derivative works of any part of the Products, or (iii) copy, rent, lease, distribute, or otherwise transfer any of the rights that End User receives hereunder. End User shall abide by all applicable local, state, national and international laws and regulations. Miscellaneous Cel-Fi, IntelliBoost, and Nextivity logo are trademarks of Nextivity, Inc. Copyright 2011 by Nextivity, Inc. U.S. Patent 7,519,323 and other Patents Pending. All Rights Reserved. Reproduction or media conversion by any means is protected by copyright and may only occur with prior written permission of Nextivity. FCC and Industry Canada Statements For models CELFI-RS240WU and CELFI-RS240CU:

i) The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems.;

ii) The maximum antenna gain permitted for devices in the bands 5250-5350 and 5470-5725 MHz shall comply with the e.i.r.p. limit; and iii) The maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-

point and non point-to-point operation as appropriate. High power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LE-LAN devices. This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. i) Le dispositif fonctionnant dans la bande 5150-5250 MHz est rserv uniquement pour une utilisation l'intrieur afin de rduire les risques de brouillage prjudiciables aux systmes de satellites mobiles utilisant les canaux adjacents. ii) Le gain d'antenne maximal autoris pour les appareils dans les bandes 5250-5350 MHz et 5470-5725 doit se conformer la puissance isotrope rayonne quivalente (p.i.r.e.) limite, et iii) Le gain d'antenne maximal autoris pour les appareils dans la bande 5725-5825 MHz doit tre conforme aux limites p.i.r.e spcifies pour le fonctionnement point point et le cas chant non point point. Les radars de haute puissance sont dsigns comme utilisateurs principaux (c.--d., qu'ils sont prioritaires) pour les bandes 5250-5350 MHz et 5650-5850 MHz et ces radars peuvent causer des brouillages et/ou des dommages aux dispositifs LAN-EL. Ce dispositif est conforme la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Limited Warranty; Warranties This Cel-Fi (Product) is distributed by your mobile carrier, and depending on their terms and conditions of sale, you may or may not have additional rights under a warranty program for Cel-Fi. This does not affect your statutory rights. All Products must be stored, carried, processed, installed or otherwise handled or dealt with by End User and its agents in accordance with Nextivitys published instructions, and in accordance with normal safety procedures for the handling of Products, and Nextivity shall not be liable for any loss, damage, injury or expense arising out of the Products or their condition if this is not done. Nextivity shall not be liable to replace any Products rejected only on the grounds of immaterial imperfections or variations in the manufacturing process. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES WITH RESPECT TO THE PRODUCTS AND ANY DOCUMENTATION OR OTHER MATERIALS PROVIDED BY NEXTIVITY, EITHER EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, AND NONINFRINGEMENT, ALL OF WHICH ARE HEREBY DISCLAIMED. WITHOUT LIMITING THE FOREGOING, NEXTIVITY. DOES NOT WARRANT THAT THE HARDWARE WILL WORK PROPERLY IN ALL ENVIRONMENTS AND APPLICATIONS, NO PERSON IS AUTHORIZED TO REPRESENT, PROMISE OR ASSUME ANY OBLIGATION OR LIABILITY CONTRARY OR IN ADDITION TO THIS WARRANTY. Limitation of Liability In no event shall Nextivity, nor its directors, employees, agents, suppliers or End Users, be liable under contract, tort, strict liability, negligence or any other legal or equitable theory with respect to the Products or any other subject matter of this Agreement (i) for any lost profits, cost of procurement of substitute goods or services, or special, indirect, incidental, punitive, or consequential damages of any kind whatsoever or (ii) for any direct damages in excess of (in the aggregate) the fees actually received by Nextivity from End User with respect to the Products actually purchased and paid for. Intellectual Property End User agrees not to copy any product or process of Nextivity, or any part thereof, except with the express, prior written consent of Nextivity, given in its sole discretion. All risks of direct or indirect patent infringement are assumed by the End User. Nothing shall be construed as recommendation to make, use, or sell any Product or process in conflict with existing or future patents. End User shall not (and End User shall not permit anyone else to): (i) in any way reverse engineer or otherwise attempt to derive any source code or underlying ideas or algorithms from any part of the Products, except to the limited extent applicable laws specifically prohibit such restriction, (ii) modify, translate, or otherwise create derivative works of any part of the Products, or (iii) copy, rent, lease, distribute, or otherwise transfer any of the rights that End User receives hereunder. End User shall abide by all applicable local, state, national and international laws and regulations. Miscellaneous Cel-Fi, IntelliBoost, and Nextivity logo are trademarks of Nextivity, Inc. Copyright 2011 by Nextivity, Inc. U.S. Patent 7,519,323 and other Patents Pending. All Rights Reserved. Reproduction or media conversion by any means is protected by copyright and may only occur with prior written permission of Nextivity. FCC and Industry Canada Statements For models CELFI-RS240WU and CELFI-RS240CU:

i) The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems.;

ii) The maximum antenna gain permitted for devices in the bands 5250-5350 and 5470-5725 MHz shall comply with the e.i.r.p. limit; and iii) The maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-

point and non point-to-point operation as appropriate. High power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LE-LAN devices. This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. i) Le dispositif fonctionnant dans la bande 5150-5250 MHz est rserv uniquement pour une utilisation l'intrieur afin de rduire les risques de brouillage prjudiciables aux systmes de satellites mobiles utilisant les canaux adjacents. ii) Le gain d'antenne maximal autoris pour les appareils dans les bandes 5250-5350 MHz et 5470-5725 doit se conformer la puissance isotrope rayonne quivalente (p.i.r.e.) limite, et iii) Le gain d'antenne maximal autoris pour les appareils dans la bande 5725-5825 MHz doit tre conforme aux limites p.i.r.e spcifies pour le fonctionnement point point et le cas chant non point point. Les radars de haute puissance sont dsigns comme utilisateurs principaux (c.--d., qu'ils sont prioritaires) pour les bandes 5250-5350 MHz et 5650-5850 MHz et ces radars peuvent causer des brouillages et/ou des dommages aux dispositifs LAN-EL. Ce dispositif est conforme la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. 420N00300200110R50 420N00300200110R50

Cel-FiTM with IntelliBoostTM Cel-FiTM with IntelliBoostTM STOP!!!

Donotcallyourcarrieruntilyouhavereadthe QuickStartGuide.Ifyouneedmorehelp,try visitinghttp://www.celfihelp.com Nextivity Incorporated Headquarters:

12230 World Trade Drive Suite 250 San Diego, CA 92128, USA http://www.nextivityinc.com SafetyPrecautions Install Cel-Fi indoors. It should not be used outdoors. This product is designed to be used with the provided power supply. It is a listed direct plug-in power unit marked Class 2 and rated 12 Vdc, minimum 1.25A. There are no user serviceable parts inside. Caution: Changes or modifications to this product not expressly approved by Nextivity may void your right to operate the equipment. For models CELFI-RS240WU and CELFI-RS240CU:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. European Office:

Whitehill Way Swindon, UK SN5 6QR STOP!!!

SafetyPrecautions visitinghttp://www.celfihelp.com Install Cel-Fi indoors. It should not be used outdoors. This product is designed to be used with the provided power supply. It is a There are no user serviceable parts inside. listed direct plug-in power unit marked Class 2 and rated 12 Vdc, minimum 1.25A. Donotcallyourcarrieruntilyouhavereadthe QuickStartGuide.Ifyouneedmorehelp,try For models CELFI-RS240WU and CELFI-RS240CU:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Nextivity Incorporated Headquarters:

12230 World Trade Drive Suite 250 San Diego, CA 92128, USA http://www.nextivityinc.com Caution: Changes or modifications to this product not expressly approved by Nextivity may void your right to operate the equipment. European Office:

Whitehill Way Swindon, UK SN5 6QR Limited Warranty; Warranties This Cel-Fi (Product) is distributed by your mobile carrier, and depending on their terms and conditions of sale, you may or may not have additional rights under a warranty program for Cel-Fi. This does not affect your statutory rights. All Products must be stored, carried, processed, installed or otherwise handled or dealt with by End User and its agents in accordance with Nextivitys published instructions, and in accordance with normal safety procedures for the handling of Products, and Nextivity shall not be liable for any loss, damage, injury or expense arising out of the Products or their condition if this is not done. Nextivity shall not be liable to replace any Products rejected only on the grounds of immaterial imperfections or variations in the manufacturing process. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES WITH RESPECT TO THE PRODUCTS AND ANY DOCUMENTATION OR OTHER MATERIALS PROVIDED BY NEXTIVITY, EITHER EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, AND NONINFRINGEMENT, ALL OF WHICH ARE HEREBY DISCLAIMED. WITHOUT LIMITING THE FOREGOING, NEXTIVITY. DOES NOT WARRANT THAT THE HARDWARE WILL WORK PROPERLY IN ALL ENVIRONMENTS AND APPLICATIONS, NO PERSON IS AUTHORIZED TO REPRESENT, PROMISE OR ASSUME ANY OBLIGATION OR LIABILITY CONTRARY OR IN ADDITION TO THIS WARRANTY. Limitation of Liability In no event shall Nextivity, nor its directors, employees, agents, suppliers or End Users, be liable under contract, tort, strict liability, negligence or any other legal or equitable theory with respect to the Products or any other subject matter of this Agreement (i) for any lost profits, cost of procurement of substitute goods or services, or special, indirect, incidental, punitive, or consequential damages of any kind whatsoever or (ii) for any direct damages in excess of (in the aggregate) the fees actually received by Nextivity from End User with respect to the Products actually purchased and paid for. Intellectual Property End User agrees not to copy any product or process of Nextivity, or any part thereof, except with the express, prior written consent of Nextivity, given in its sole discretion. All risks of direct or indirect patent infringement are assumed by the End User. Nothing shall be construed as recommendation to make, use, or sell any Product or process in conflict with existing or future patents. End User shall not (and End User shall not permit anyone else to): (i) in any way reverse engineer or otherwise attempt to derive any source code or underlying ideas or algorithms from any part of the Products, except to the limited extent applicable laws specifically prohibit such restriction, (ii) modify, translate, or otherwise create derivative works of any part of the Products, or (iii) copy, rent, lease, distribute, or otherwise transfer any of the rights that End User receives hereunder. End User shall abide by all applicable local, state, national and international laws and regulations. Miscellaneous Limited Warranty; Warranties This Cel-Fi (Product) is distributed by your mobile carrier, and depending on their terms and conditions of sale, you may or may not have additional rights under a warranty program for Cel-Fi. This does not affect your statutory rights. All Products must be stored, carried, processed, installed or otherwise handled or dealt with by End User and its agents in accordance with Nextivitys published instructions, and in accordance with normal safety procedures for the handling of Products, and Nextivity shall not be liable for any loss, damage, injury or expense arising out of the Products or their condition if this is not done. Nextivity shall not be liable to replace any Products rejected only on the grounds of immaterial imperfections or variations in the manufacturing process. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES WITH RESPECT TO THE PRODUCTS AND ANY DOCUMENTATION OR OTHER MATERIALS PROVIDED BY NEXTIVITY, EITHER EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, AND NONINFRINGEMENT, ALL OF WHICH ARE HEREBY DISCLAIMED. WITHOUT LIMITING THE FOREGOING, NEXTIVITY. DOES NOT WARRANT THAT THE HARDWARE WILL WORK PROPERLY IN ALL ENVIRONMENTS AND APPLICATIONS, NO PERSON IS AUTHORIZED TO REPRESENT, PROMISE OR ASSUME ANY OBLIGATION OR LIABILITY CONTRARY OR IN ADDITION TO THIS WARRANTY. Limitation of Liability In no event shall Nextivity, nor its directors, employees, agents, suppliers or End Users, be liable under contract, tort, strict liability, negligence or any other legal or equitable theory with respect to the Products or any other subject matter of this Agreement (i) for any lost profits, cost of procurement of substitute goods or services, or special, indirect, incidental, punitive, or consequential damages of any kind whatsoever or (ii) for any direct damages in excess of (in the aggregate) the fees actually received by Nextivity from End User with respect to the Products actually purchased and paid for. Intellectual Property End User agrees not to copy any product or process of Nextivity, or any part thereof, except with the express, prior written consent of Nextivity, given in its sole discretion. All risks of direct or indirect patent infringement are assumed by the End User. Nothing shall be construed as recommendation to make, use, or sell any Product or process in conflict with existing or future patents. End User shall not (and End User shall not permit anyone else to): (i) in any way reverse engineer or otherwise attempt to derive any source code or underlying ideas or algorithms from any part of the Products, except to the limited extent applicable laws specifically prohibit such restriction, (ii) modify, translate, or otherwise create derivative works of any part of the Products, or (iii) copy, rent, lease, distribute, or otherwise transfer any of the rights that End User receives hereunder. End User shall abide by all applicable local, state, national and international laws and regulations. Miscellaneous Cel-Fi, IntelliBoost, and Nextivity logo are trademarks of Nextivity, Inc. Copyright 2011 by Nextivity, Inc. U.S. Patent 7,519,323 and other Patents Pending. All Rights Reserved. Reproduction or media conversion by any means is protected by copyright and may only occur with prior written permission of Nextivity. Declaration of Conformity We, Nextivity, Incorporated, 12230 World Trade Drive Suite 250, San Diego, CA 92128, USA declare under our sole responsibility that the product(s):

Product Description: Cel-Fi Residential (CELFI-RS2) Models: CELFI-RS210WU and CELFI-RS210CU, CELFI-RS250WU and CELFI-RS250CU to which this declaration relate(s) is(are) in conformance with the provisions of Directive 1999/5/EC governing Radio Equipment and Telecommunications Terminal Equipment and the Mutual Recognition of their Conformity using the following standards:

SAFETY (art 3.1.a): EN 60950:2006 /A11:2009 /A1:2010 EMC: (art 3.1.b): EN 301 489-1 v1.8.1, EN 301 489-23 v1.4.1, EN 301 489-17 v2.1.1, EN 62311:2008, SAR Touch Safe RADIO SPECTUM (art 3.2): EN 301 908-1 v4.2.1, EN 301 908-11 v4.2.1, EN 301 893 v1.5.1 _____________________________________

(Place/Dateofissue)

(nameandsignatureorequivalentmarkingofauthorizedperson) ________________________________________________________________ 420N00300200110R50 Cel-Fi, IntelliBoost, and Nextivity logo are trademarks of Nextivity, Inc. Copyright 2011 by Nextivity, Inc. U.S. Patent 7,519,323 and other Patents Pending. All Rights Reserved. Reproduction or media conversion by any means is protected by copyright and may only occur with prior written permission of Nextivity. Declaration of Conformity We, Nextivity, Incorporated, 12230 World Trade Drive Suite 250, San Diego, CA 92128, USA declare under our sole responsibility that the product(s):

Product Description: Cel-Fi Residential (CELFI-RS2) Models: CELFI-RS210WU and CELFI-RS210CU, CELFI-RS250WU and CELFI-RS250CU to which this declaration relate(s) is(are) in conformance with the provisions of Directive 1999/5/EC governing Radio Equipment and Telecommunications Terminal Equipment and the Mutual Recognition of their Conformity using the following standards:

SAFETY (art 3.1.a): EN 60950:2006 /A11:2009 /A1:2010 EMC: (art 3.1.b): EN 301 489-1 v1.8.1, EN 301 489-23 v1.4.1, EN 301 489-17 v2.1.1, EN 62311:2008, SAR Touch Safe RADIO SPECTUM (art 3.2): EN 301 908-1 v4.2.1, EN 301 908-11 v4.2.1, EN 301 893 v1.5.1 _____________________________________________________________________________________________________

(Place/Dateofissue)

(nameandsignatureorequivalentmarkingofauthorizedperson) 420N00300200110R50

November 9, 2011 FCC RE: YETCELFI-RS240WU, EA272711 YETCELFI-RS240WU, EA579500 YETCELFI-RS240CU, EA902503 YETCELFI-RS240CU, EA218975 To Whom It May Concern:

Please supersede the user manual file 420N003-002-001-10R_FCCpending.pdf. Nextivity provided 420N003-002-001-10R51_pending.pdf as an updated version Sincerely, David Guidotti Senior Technical Writer Page 1 of 1