Kilogram Stone Pound Wifi Connection Data pending to transmit to smartphone Low Battery General Instructions Select Measurement Unit Kogan SmarterHome WiFi Body Composition Smart Scale KASHBDYSCLA applies BIA (Bio-impedance Analysis) technology. A small amount of weak current ows through the human body so as to detect the bio-impedance and estimate BMI, body fat, body water, muscle mass, bone mass and BMR. The electrical current is small and may not be felt. This BIA technology is cheap, safe, non-invasive, toxic-free and harmless. It also possesses the characteristics of simple operation and abundant information. The current mentioned above is less than 0.5mA. However, please be aware that anyone with an wearable or implantable medical electronic instrument, such as a pacemaker, must avoid using this device. After the Wi-Fi password is congured successfully, you can select measurement unit through pressing the unit button back of the scale. You can choose kilogram, pound and stone as your measurement unit. Configure the Wi-Fi Password 1. Install the App Kogan SmarterHome. This App could be freely downloaded at the APP Store, you may search and install it. 2. Register an account. Then follow these steps:
Note: Take the latest version of APP. Insert the Batteries Open the battery door in the back of the scale. Remove insulating strip from beneath the battery
(if tted) or insert batteries (3 x 1.5V AAA) observing the polarity signs (+ and -) inside the battery compartment. Close the battery door and wait until the digits 0.0kg are shown on the LCD. CAUTION When the symbol appears, the device will power off in about 4s. Then you shall replace with a new set of batteries. Please replace all three batteries at the same time. Do NOT mix the old batteries with the new one. Worn batteries are hazardous waste. Do NOT dispose of them together with the household garbage. Please refer to the local ordinances and recycling instructions regarding disposal of the worn batteries and scrapped device. If you do not intend to use this unit for a prolonged period of time, it is advisable to remove the batteries before storing. 3.Then long press the button in the back of the scale, the icon and icon will be shown on the LCD alternatively, and the Wi-Fi icon blinks as well, indicating configuration is proceeding. 2 Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
