FCC ID: 2AXPA-NGV400 4CH WI-FI NVR KIT

Quick Operation Guide of Wireless NVR Kit Quick Operation Guide of Wireless NVR Kit Quick Operation Guide of Wireless NVR Kit Quick Operation Guide of Wireless NVR Kit 5.2 Install wireless NVR Packing list S/N Item Quantity S/N Item Description 1. Install the hard disk with a cross screwdriver VersionV3.0 Screw bag(4 screws for HDD) Thank you purchasing our products, if you have 1 meter network cable(for IPC

(1) Unfastening the screws on the rear Install antenna panel,and side panel.

(2) Remove the cover from the NVR. Connector for LAN

(3) Connect the data cable and power cable to DC 12V@2A Power supply

(4) Fasten the screws on the bottom to fix the VGA DB9 connector for VGA interface output Product user manuals HDMI video output connector

(5) Re-install the cover of the NVR and fasten screws. If the description of the manual doesn't match for t Wireless IP Camera DC 12V@1A Power supply (for IPC) 2. Cable Connection USB ports for additional

(1) Connect mouse to USB interface . devices such as USB mouse,

(2) Connect to monitor by HDMI cable or VGA U disk NVR Host USB Mouse code match)

(NVR) 1 4 1 1 1 1 4/9 4/9 1 2 3 4 5 6 Antenna interface Network interface HDMI interface USB interface Power Supply Screw bag(4 screws for HDD) 4/9 12VDC power supply.

(3) Connect to internet by network cable via router(or 4 Product description 4.1 Wireless Camera 5 Installation of device 5.1 Install wireless camera S/N Item Description Note:1.Disconnect the power to the NVR before installing

(4) Connect to 12VDC adapter and turn on power,the Power indicator would turn red. Antenna interface Setscrew Knob Network interface Install antenna a hard disk drive (HDD). A factory recommended HDD should be used for this installation. Fixed bracket 2.The maximum of hard disk capacity supported is Adjust the camera angle 4TB. In order to guarantee the video quality, IPC antenna should try to keep in parallel or tangent with NVR antenna.Because the signal of surrounding antenna is much stronger ,but much weaker if antenna endpoints Connector for LAN back off direction. 5 Power Supply 12VDC power supply.

(1) Drill mounting holes, push in screws and fasten the 4.2 Wireless NVR

(2) Connect Power adapter to socket.

(3) Loosen the setscrew and knob,adjust the camera angle according to your surveillance need,then fasten the Correct method Fault method Steps:

screws. screws. 1 2 3 4 Wireless NVR Kit Quick Operation Guide 1 Statement any questions or needs, please contact us. This manual applies to wireless network video recorder. The company based on product feature enhancements and updates this manual, and will be regularly updated or improved products or processes that are described in this manual. Updates will be added to the new version of this manual without prior notice. the contents of he material object ,prevail in kind. 2 Attentions Please check when unpacking boxes, confirm the items and lists. Please dont make the kit fall to ground or be hit by strong forces. Please keep good ventilation environment around this product. Avoid installation in severe vibration environments. Please avoid environment with much humidity, dust, extreme heat or extreme cold of the power supply carefully. Please avoid environment with much humidity, dust, extreme heat or extreme cold of the power supply carefully. Please keep the product box to facilitate transfer or removal of the equipment. Please make sure to turn off power of all items during installation. Check the voltage properly. Please contact the distributor or service center if the kit is damaged or not working. 3 Open-package inspection After receive product, please open gift box then check accessories. If any damage or lack,kindly please contact to the distributor. 1 2 3 4 5 6 7 8 9 1 2 3 4 Steps:

HDD. HDD. cable. switch). Notes:

Quick Operation Guide of Wireless NVR Kit Quick Operation Guide of Wireless NVR Kit Quick Operation Guide of Wireless NVR Kit Quick Operation Guide of Wireless NVR Kit 6 Local Operation Necessary Operation: NVR can only be recording and

(3) SelectDHCP,and click save button,itll request IP Searchbuttonselect the recordselect or create new passwords. address from the DHCP server automatically. fileclick Backup button to backup record. Step 3: Format the hard disk remote access,after perform necessary operations. Optional Operation:You can decide whether to do this as you like,such as video playback,backup, device Only NVR can record after format hard disk.

(4) The configuration is Sucessful,if the IP address is

(1) Right click to login and enter Main not 0.0.0.0.After refresh. Otherwise,please set the menuSystemHDD manager. IP address and gateway information Manually. operation,etc. 6.1 Necessary Operation Step 1: Power on Check the power supply is plugged into an electrical outlet,and turn on the button.Then the power LED should red,and the video will automatic display on the monitor,after several minutes.

(2) Select the hard disk,and click Format Disk button .

(3) The hard disk status would turn on in use.Itll display on each live view channel,and start record.

(1) P2P status

(3) Add camera Add or replace wireless camera,please fellow the steps below. a) Wait 1.5 minutes for camera start up. b) Enter Main menuPair IPC, delete camera which status is " not connected" in the Channel list. c) Click Pair button,and pop-up a window,"Pairing,pus and hold IPC button ". d) Push the pair button in IPC within 5 seconds. e) It mean pair successfully when dispaly "connected"

f) Repeat step c and d, then click [OK] button ton in status column. finish. 1Click right mouse button, log-in menu pops up. 2Enter the correct password, default password is Step 2: Login admin.

(1) HD manager

(2) Network configuration 6.2 Optional Operation

(1) Video playback Steps:Right click to select playback login select singal or multi channel playback mode select channel select date double click to start play record.

(2) Display on live view Step 4: Network configuration You can remote access NVR via phone or internet after configure network parameter successful. Note: Please modify the user password before using the

(1) Conform network cable is connected to LAN product to protect your privacy. correctly for access the internet. Password modification: " Main menu The system

(2) Enter intoMain menuSystemNetwork Config menu Account Modify Pwd Enter the old password:

menu.

(admin) Set a new password Save "to change

(2) Video backup Steps:Insert U disk to USB interfaceRight click to select Main menuloginselect backupselect channelset starting time and ending timeclick 1Right click menu 5 6 7 8 Quick Operation Guide of Wireless NVR Kit Quick Operation Guide of Wireless NVR Kit Quick Operation Guide of Wireless NVR Kit Quick Operation Guide of Wireless NVR Kit Select Privacy Policy and input E-mail, verification code ,password, then tap Done button to complete 2Pair IPC 7 Cellphone remote monitor Step 1:Install software Scanning the QR code in the user manual to download ,and install it. 1Download QR code (2) Desk icon

(1) add device window (2)select autosearch

(1)Device list (2) Channel list

(1) Register (2) Input verification code 3select device (4) add device

(3) Password Step3: Add device

(1) Tap + button in the main interface view to open the device adding view. scaning" button;

connect to device;

(2) tap to select auto search window,then tap "Start

(5) device list

(3) Select the device that want to add,it will auto Step 3:Live view

(4) Finally,the added device would display in device list.

(3) Live view

. Tap the online device icon in the device list, the channels video will be connected and display automatically. have no video Notes: If the local NVR has no video,the cloudlens2 5 6 7 8 3Startup Step 2: Account registration

(1) Tap Register button in the login interface view to register;

Quick Operation Guide of Wireless NVR Kit Quick Operation Guide of Wireless NVR Kit Quick Operation Guide of Wireless NVR Kit Quick Operation Guide of Wireless NVR Kit Android/IOS Icon description Icon description Please note that Date The symptom Maintenance and serial 1. The following situations caused by the product failure number changes ______________ Distributor _____________Phone ________________ Distribution units: (seal) __________________________ Maintenance records:

Note: If a replacement, please record the original product number;

This distributor retention Device info and share Alarm info list Playback on device Cloud Record Channel Setting Hiseepro download QR code Multi-screen is not covered by the warranty:

Sanp Talk a. Due to accidents, negligence, disasters, improper operation or incorrect operation resulting in product failure;

b. Careless use of circumstances or conditions, such as wrong voltage, ambient temperature, lightning, and lead to product failure;

c. Used by non-factory authorized maintenance unit maintenance products;

Record d. Beyond promise to change, the warranty period.

SD/HD 2. When users buy the product failure, please user registration card and dealer or contact technical services throughout the services. 3. When a user provides to the dealer's technical service the has any objections, can complain manufacturers customer support service center. 4. Valid warranty card subject to seal the rear to Warranty card name:_________________________________ Address:_____________________________ Phone:________Fax:________Zip code:__________ E-mail:______________________________ User ______ _______ Product type(Model):__________________________ Product number S/N:_______________________ Production date:_______Year _______Month ______ Date of purchase:______Year ______ Month ______ Free warranty__________ Month If you have other requests, please fill in the following:

______________________________________ ______________________________________ 13 14 15 16 20C

FCC ID LABEL:

Width:2cm FCC ID: 2AXPA-NGV400 Product name: 4CH WI-FI NVR KIT Model No: NG-V400 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions

(1) This device may ont cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. Long: 4cm Label Location

NGTECO CO., LIMITED Agent Authorization Company: NGTECO CO., LIMITED Address: UNIT B, 20TH FLOOR, COS CENTRE, 52-56 TSUN YIP STREET, KWUN TONG, KOWLOON, Hong Kong Product Name: 4CH WI-FI NVR KIT Model Number(s): NG-V400 Product Description: 4CH WI-FI NVR KIT We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Date: Sept. 28, 2020 Signature:

Name:

Yushu Su Title:

Manager Company:

NGTECO CO., LIMITED

Shenzhen Hankvision Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Sept. 28, 2020 Subject; Request for Confidentiality FCC ID: 2AXPA-NGV400 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Yushu Su Title: Manager