FCC ID: 2AV76-NMOK-100W WIRELESS POWER CHARGING SYSTEM

1. Constitution of the Unit Assy-Wireless Charging ( WPC ) for vehicle

Wireless Charger Unit, it’s possible to charge the receiver based upon WPC( Wireless Power Consortium ) Standard.

WPC detects the receiver based upon the WPC standard being put on the surface of charge,

and begins to charge it.

WPC detects conditions of the receiver and controls the transmission electric power by the state of the battery of it.

When the receiver is removed,WPC will suspend the transmission electric power.

When the receiver is full charge, WPC will suspend the transmission electric power.

WPC can recognize a foreign object and suspend the transmission electric power.

2. User's manual (provisionally)

◎ Unit Assy - Wireless Charging ( NIDEC MOBILITY KOREA CORPORATION : NMOK-100W )

You can charger a mobile phone or the battery pack and the like to Qi-compliant Wireless Charger Unit.

※ Wireless Charger Unit is abbreviated as WPC.

- Charger Funcion Operation Frequency and Modulation: 120 ± 5 KHz, ASK

◎ NFC

- For NMOK-100W, NFC communication is also possible on this device.

Frequency Range

13.56 ㎒ (NFC)

Modulation Technique

ASK

Number of Channel

1 channel

Antenna Type

Loop coil Antenna

FCC Warning Statement

FCC Part 15.19

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device

may not cause harmful interference, and (2) this device must accept any interference received, including interference that

may cause undesired operation.

FCC Part 15.21

Any changes or modifications (including the antennas) to this device that are not expressly approved by the manufacturer

may void the user’s authority to operate the equipment.

IC Warning Statement

This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must

accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.

L'exploitation est autorisée aux deux conditions suivantes : (1) L'appareil ne doit pas produire de brouillage, et (2) L'utilisateur

de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le

fonctionnement.

FCC/IC Radiation Exposure Statement

This equipment complies with FCC/IC RF Radiation exposure limits set forth for an uncontrolled environment. This device

and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.

This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Cet équipement est conforme aux limites établies par Industrie Canada en matière d'exposition aux

radiofréquences dans un environnement non contrôlé. Cet appareil et son antenne ne doivent pas être colocalisés

ou fonctionner en conjonction avec tout autre antenne ou émetteur.

Cet équipement doit être installé et utilisé avec une distance minimale de 20cm entre le radiateur et votre corps.

FCC/IC Label 1. FCC/IC Label Drawing NIDEC MOBILITY KOREA CORPORATION Model: NMOK-100W FCC ID: 2AV76-NMOK-100W IC : 850F-NMOK100W Made in Korea Thisdevicecomplieswithpart15oftheFCCrulesOperationissubjectto thefollowingtwoconditions:(1)Thisdevicemaynotcauseharmful interference,and(2)Thisdevicemustacceptanyinterferencereceived, includinginterferencethatmaycauseundesired opperation. 2. FCC IC Label Location Bottom view of EUT 5 cm 5.5 cm

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name NIDEC MOBILITY KOREA CORPORATION 790-12, Bogaewonsam-ro, Bogae-myeon, Anseong-si, Gyeonggi-do, South Korea 17507 Address Grantee Code FCC ID Contact Email Contact Phone Authorized Contact Name Sang-Il Nam 2AV76 2AV76-NMOK-100W nam.sangil@nidec.com 82-2-850-5789 a) b) c) d) e) I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature:

Date: Jan. 5, 2021 Print Name:

Sang-il Nam Title:

Manager

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Applicant Declaration Rev:0.0

TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidential Request To whom it may concern:

Date: Jan. 5, 2021 This letter is to comply with Section 0.457(d)(2)(i) and 0.459 pertaining to confidential material. We, NIDEC MOBILITY KOREA CORPORATION, would like the following documents regarding this submission for FCC ID: 2AV76-NMOK-100W to be kept confidential. We are also hereby request Short Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 041705. This provision will give NIDEC MOBILITY KOREA CORPORATION temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Temporary Confidential exhibits are listed as follows:

The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sang-il Nam / Manager NIDEC MOBILITY KOREA CORPORATION TEL: +82-2-850-5789 E-mail: nam.sangil@nidec.com

TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 To whom it may concern:

Date: Jan. 5, 2021 We, the undersigned, hereby authorize SGS Korea Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with NIDEC MOBILITY KOREA CORPORATION. This authorization is valid until further written notice from the applicant. Sang-il Nam / Manager NIDEC MOBILITY KOREA CORPORATION TEL: +82-2-850-5789 E-mail: nam.sangil@nidec.com

FCC ID: 2AV76-NMOK-100W ror toseae Theres a NMOK-100W that would like to have your authorization as an Inductive wireless power transfer applications approval. The specific product as below, NMOK-100W, with its designed features and specified description, considers special requirements for KDB 680106 D01 v03 section 5, b) requirements. COC TNs Pea mE itor AWC MA a FCC ID:

NMOK-100W IT AON) UO KDB 680106 D01 v03 Section 5, b) Requirements:

(1) Power transfer frequency is less that 1 MHz

(2) Output power from each primary coil is less than yas ROR EES

(3) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils

(4) Client device is placed directly in contact with the transmitter

(5) Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion).

(6) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. NITias CNA eae TELL eos B) Title: SKo nine MVE moe SGS Korea Co. Ltd.

+82-3 1-428-0903 On behalf of:

Telephone:

Date: 19 Jan, 2021 NIDEC MOBILITY KOREA CORPORATION WIRELESS POWER CHARGING SYSTEM Product Technical Specification:

ON PAU Eb 2 ROR Era The transfer system including a OTe sree MU ALOE EL NIBT oe UTE A MeO em Kee coame rele allow only between individual pairs RCO E Client device is placed directly in contact with the transmitter. Mobile conditions only H-Field: 0.216 A/m (at 15 cm)

< 0.815 A/m (50% of the limit) H_ chae You

(Print name)

(Company Name) Result:

Se neeree!

Complied Complied Oresviye)i Car Osea ebloel Oronviie) bees Os aw Reese sree) (eA e owe) eee!