FCC ID: 2AQURWF96SD Mini Outdoor Dimmer Plug

Wi-Fi Outdoor Dimmer Plug WF96SD Meet your new smart Plug !

Plug x 1 Screw x 1 Plastic Anchor x 1 IMPORTANT!

This unit is suitable for outdoor use in damp locations. Do not expose to rain or immerse in water. Introduction The EVA LOGIK WF96SD is a 400W MAX Loading smart dimmer plug designed for use seasonal and landscape lighting, porch light, and other indoor and outdoor plug-in small appliances. It's compatible with dimmable LED, halogen, incandescent, and fluorescent bulbs. Works with Amazon Alexa, Google Assistant. You can use the free App--Smart Life, or voice control by Alexa and Google Assistant to operate your devices in your home. Specifications Power: 120VAC, 60Hz Item Size: 56*80*39mm Loading : 400W Wireless Frequency: 2.4GHz Wireless Standard: IEEE802.11b/g/n Operating Temperature: -4 F~122 F A B C For outdoor use IP65 Rated

(A) Manual / Program button Single press: manually turn on/o your device. Hold: adjust brightness. RGB LED indicator Sky-blue: Network configuration mode Blue: Light status indicator Red: Network Failure/Overloading Warning Purple: AP Network configuration mode

(B) Dimmer Outlet This is your smart outlet that will be included in your smart home.

(C) Protector Insert in connector when not in use. The plug is designed to be angled 45 degrees, allowing you to make the most of your home wall outlet. Use our screws and anchor to lock it in the wall.(optional) Overloading protection is protection against overheat-

ing of the protected equipment. When the device's temperature is high, the LED will light up in red and cut down the power. Please power o the device and use it When the LED is purple (AP mode), please press the button 3 times quickly until the LED change to Sky-blue and LED blinks--Back to EASY MODE. NOTE: Do not plug an extension cord in this smart plug. APP Connection 3. The smart switch can be also used with Amazon Echo and Google Home. Please scan the QR code below and follow the instructions if you have any trouble pairing with them. QR code Smart Life Note:

Your device needs to be installed in the network coverage of your home router. 1. Please scan the QR code to download the application Smart Life. 2. If you cannot download Smart Life app, please search Smart Life on Google Play (for Android phone) or Apple Store (for iOS phone) to download. please follow the instructions below to set up your smart switch.

, Amazon-Echo Google-Home 7 100%

8 Mini Outdoor Dimmer P... 1 2 3 Tap + to add a device in your app Select Electrician -

Soclet (Wi-Fi) Enter the Wi-Fi Password Easy Mode 4 Press the button 3 times quickly until sky-blue LED blinks rapidly. 6 Wait for its 100%

(LED stays in green 3 seconds.) Select is fast blinking(0.5s/time) 5 Click to Continue Adjust the brightness of the light. Locks for the minimum/

maximum value SETTING For better performance of the LED, please set a maximum /minimum-

brightness value. When the bulb is at this maximum

/minimum brightness value, the bulb does not flicker. The minimum brightness of dierent bulbs may be dierent. Restores State after Power Failure (This parameter can access you to set the plug to be on/o after power failure.) Value=0 The plug is OFF regardless of the state prior to power failure. Value=1 The plug is ON regardless of the state prior to power failure Value=2 (default) Memory state before power failure This switch will be return to state prior to the power failure after power is restored. Operation: Quickly press button 8 times. Please note: the switching of each value is in order, a quick press button 8 times will switch once. eg: Switching from value 0 to value 2 needs 2 switchings. Light o State Setting (This parameter can access you to set the light fade out or o immeditaly.) Value=1 (default) Fade out Value=2 Instantaneous o Operation: Quickly press button 10 times Please note: the switching of each value is in order, a quick press button 10 times will switch once. eg: Switching from value1 to value 2 needs 1 switching. FCC warning:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must acceptany interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. CAUTION - PLEASE READ!

This device is intended for installation in accordance with the National Electric Code and local regulations in the United States, or the Canadian Electrical Code and local regulations in Canada. If you are unsure or uncomfortable about performing this installation consult a qualied electrician. MEDICAL EQUIPMENT Please DO NOT use this plug to control Medical or Life Support equipment. This device should never be used to control the On/O status of Medical and/or Life Support equipment. OTHER WARNINGS Risk of Fire Risk of Electrical Shock Risk of Burns

eo)

[7p Tal et he MITT MeTE Co forol Pan ade]

Model: wro6sD Le PANN Oa aa ere ace Na Pa clara SEU Haasan yA) COT oleate acetic

[ced Dy) NOLO AI clos by Madein China VER.LO Date Code:

O WRRREREDURUNUR ney BAR Ne oo eae 4 ae aT 7a 4 7 SU a + a a cad P TSS PLCS L eS QR an j aT] Il a ATMA MNT Lj |

4 j Gi ee Z} ' Boot 0 Faun AUP reese | Tc en

C5266091_X10_Ed.2 NIE-TECH CO., LTD Date: 2020-10-22 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC ID: 2AQURWF96SD To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality Short-Term Confidentiality NOTE 2 No No No No No NOTE 1 NOTE 1 No No No No No No No No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of above are withheld from public view for a period of Grant of Equipment Authorization and prior to marketing. short-term Confidentiality, the applicant requests the exhibits selected days from the date of the It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. 1/1 C5266091_X10_Ed.2 Sincerely, Signature:

Name:Jianghai Nie Title:Manager 1/1

Declaration on model difference We, NIE-TECH CO., LTD the undersigned hereby confirm that these models are identical, and all models have the same RF module and Antenna, except for color of enclosure and model No. for trading purpose. Product name Trade name FCC ID INPUT Model No. Mini Outdoor Dimmer Plug EVA LOGIK 2AQURWF96SD AC120V,60Hz WF96SD,MP22WD Confirmed by:

Clients signature:

Date:2020-10-22 Clients name / title: Jianghai Nie /Manager Page 1 of 1

C5266091_X8_Ed.1 Letter of Authorization NIE-TECH CO., LTD Company: NIE-TECH CO., LTD Address: Jinlian commercial center 9001, Jinxiu road No.2, Changan Town,Dongguan City, GuangDongProv., CHINA Product Name: Mini Outdoor Dimmer Plug Model Number: WF96SD,MP22WD FCC Identifier: 2AQURWF96SD We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. is allowed to forward all Name: Jianghai Nie Date: 2020-10-22 Title: Manager Signature of applicant:

1/1