FCC ID: 2AQURRF96S Outdoor wireless outlet with remote

MP22R 270 x 297 mm 80G 90 x 99 mm Minoston Outdoor Wireless Outlet with Remote MP22R-1/MP22R-3 (RF96S) Meet your new smart Plug !

CR2032 Battery x 1 Remote Control x 2 IMPORTANT!

This unit is suitable for outdoor use in damp locations. Do not expose to rain or immerse in water. A B C

(A) Manual / Program button ON / OFF

(B) Smart Outlet This is your smart outlet that will be included in your smart home. For outdoor use

(C) Protector Insert in connector when not in use. 1875W). Specifications Model: MP22R-1 Power:125VAC 60Hz Item Size: 3.9x1.97x5.8 in Loading:15A Wireless Frequency: 433MHZ lock it in the wall. (optional) Use our screws and anchor to Plug the light you want to control into the Smart plug controlled outlet. NOTE: Plug directly into the outlet, do not use with power strip. PROGRAMMING THEOUTLETS Notes: The outlet is pre-programmed for immediate use, but the configurationcan be customized to meet your needs. To pair receiver to transmitter 1.Plug the receiver outlet to a power outlet. 2.Press and hold the ON/OFF button on the receiver outlet for 3 seconds and the LED indi-

cator will start flashing slowly. 3.Release the ON/OFF button on the receiver and press ON or OFF button on the transmitter to pair the transmitter to the receiver. If you have any questions, please contact us at ask@minoston.com Introduction The Minoston MP22R-1 is an enabled 15A (1875W ) Resistive outdoor smart plug designed for use seasonal and landscape lighting, porch light, fountains, pumps and other indoor and outdoor plug-in appliances.It's compatible with LED, halogen, incandescent, xenon, fluorescent and compact fluorescent bulbs. FEATURES Easily controlled by the remote control from up to 100 feet in line-

of-sight. Separate on and off buttons on the remote control. Outlets will remain poweed off after a power outage to save energy. Power output up to 1875W at 125V (60Hz). Low power consumption, reduces energy use and extends product life by up to 15%. Manual pairing. SETUP Install one CR2032 battery in the remote control's battery compart-

ment, making sure the polarity of the battery is correct. Plug the receiver into an outlet and plug a device or appliance into Press the ON or OFF button on the remote control to operate the an outlet of the receiver. receiver outlet . NOTES Regularly change the battery in the remote control for best perfor-

mance. If you find the outlet switch is not responding or the LED indicator on the remote control becomes dim, the battery should be replaced. Always dispose of old batteries properly with conside-

ration for the environment. Make sure the battery and outlets are installed firmly and correctly for safe operation. The outlet switch is for indoor and outdoor use. Use only in well-ventilated areas. Do not exceed the maximum load current of 15A (Approximately TROUBLESHOOTING In the case that the outlet receiver does not respond to the remote control,please follow the steps given below to resolve the issue:

1.Check to see if the battery of the remote is low and needs replace-

2.Make sure that the outlet receiver is correctly placed in the power ment. socket. 2.Make sure that the outlet receiver is correctly placed in the power 3.Make sure that the outlet receiver is used in an area with proper air circulation to avoid overheating. 4.Reset and program the outlet. TECHNICAL DATA Voltage............................... 125V~60Hz Resistive ............................. 15A 1875W Tungsten ............................ 8A 1000W Transmission frequency....433.92MHz Remote battery.............CR2032 FCC warning:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference,

(2) This device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. CAUTION - PLEASE READ!

This device (MP22R-1) is intended for installation in accordance with the National Electric Code and local regulations in the United States, or the Canadian Electrical Code and local regulations in Canada. If you are unsure or uncomfortable about performing this installation consult a qualied electrician. MEDICAL EQUIPMENT Please DO NOT use this plug to control Medical or Life Support equipment. This device should never be used to control the On/Off status of Medical and/or Life Support equipment. OTHER WARNINGS Risk of Fire / Risk of Electrical Shock / Risk of Burns IMPORTANT SAFETY INSTRUCTIONS 1. READ AND FOLLOW ALL SAFETY INSTRUCTIONS. 2. Read and follow all instructions that are on the product or provided with the product. 3. do not use an extension cord. 4. Reference the National Electrical Code, NFPA 70, specifically for the installation of wiring andclearances from power and lighting conductors. 5. Installation work and electrical wiring must be done by qualified person(s) in accordance with allapplicable codes and standards, including fire-rated construction. 6. do not install or use within 10 feet of a pool 7. do not use in a bathroom 8. WARNING: Risk of Electric Shock. When used outdoors, install only to a covered Class A GFCIprotected receptacle that is weatherproof with the power unit connected to the receptacle. If one is not provided, contact a qualified electrician for proper installation. closing the receptacle cover. Ensure that the power unit andcord do not interfere with completely 9. WARNING: Risk of Electric Shock. Mount the unit at a height greater than 1 foot from the ground surface 10.WARNING: Risk of Electric fire. install only to a receptacle protected by 20A branch circuit over current protection. SAVE THESE INSTRUCTIONS This manual contains important safety and operating instructions.

nosTEN () Outdoor Wireless Outlet with Remote Model: MP22R-1/MP22R-3(RF96S) Power. 25VAC 60H2 Loading: 15 Amp Max Wireless Frequency: 433MHz FCC ID: 2AQURRF96S Outdoor use Made in China VER10 Date Code:

WARNING Mount vertically with the receptacles facing downward and atleast 2 above the round. For outdoor usage, Use this product with ground (@) faut cruitinterupter(GFCI) outlet.

C5266091_X10_Ed.2 NIE-TECH Co., Ltd Date: 2022-07-04 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC ID: 2AQURRF96S To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No No No NOTE 1 NOTE 1 No No Short-Term Confidentiality NOTE 2 No No No No No No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, 1/1 C5266091_X10_Ed.2 Signature:

Name:Jianghai Nie Title:Manager 1/1

C5266091_X8_Ed.1 Letter of Authorization NIE-TECH Co., Ltd Company: NIE-TECH Co., Ltd Address: Jinlian commercial center 9001, Jinxiu road No.273, Changan Town,Dongguan City, GuangDong Prov., CHINA Product Name: Outdoor wireless outlet with remote Model Number: MP22R-1/MP22R-3(RF96S) FCC ID: 2AQURRF96S We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Jianghai Nie Date: 2022-07-04 Title: Manager Signature of applicant:

1/1