FCC ID: CGJ1148EA Wireless Transmitter

by: Nikon Corporation latest update: 2012-02-14 model: 1148EA

Two grants have been issued under this FCC ID on 02/14/2012 (this is one of five releases in 2012 for this grantee). Public details available include frequency information, internal & external photos, and manuals. some products also feature user submitted or linked instructions, warrantee terms, troubleshooting guides, password defaults, & drivers.

permalink for this FCC identifier

search for: Repair details

from iFixIt

Trade-in? Recycling locations

eg for Slack usage

all	frequencies		exhibits	applications
		manual

all exhibits 21
1 ~ 2012-02-14 14
2 ~ 2012-02-14 17

app s				submitted / available
1 2	Manual	Users Manual	pdf	308.81 KiB
1 2		Cover Letter(s)	pdf
1 2		External Photos	pdf
1 2		Test Report	pdf
1 2		Test Report	pdf
1 2		Test Setup Photos	pdf
1 2		Internal Photos	pdf
1 2		ID Label/Location Info	pdf
1 2		ID Label/Location Info	pdf
1 2		Cover Letter(s)	pdf
1 2		RF Exposure Info	pdf
1 2		Test Setup Photos	pdf
1 2		RF Exposure Info	pdf
1 2		RF Exposure Info	pdf
1 2		Test Report	pdf
1 2		Test Report	pdf
1 2		Test Setup Photos	pdf
1 2		Test Report	pdf
1 2		Test Report	pdf
1 2		Test Setup Photos	pdf
1 2		RF Exposure Info	pdf

exhibit
download
text

1 2

Manual

Users Manual

pdf

308.81 KiB

Wireless Transmitter WT-5 Users Manual For Your Safety To prevent damage to your Nikon product or injury to yourself or to others, read the following safety precautions in their entirety before using this equipment. Keep these safety instructions where all those who use the product will read them. The consequences that could result from failure to observe the precautions listed in this section are indicated by the following symbol:

WARNINGS Do not disassemble Failure to observe this precaution could result in fire, electric shock, or other injury. Should the product break open as the result of a fall or other accident, disconnect the camera power source and take the product to a Nikonauthorized service representative for inspection. Do not use in the presence of flammable gas Failure to observe this precaution could result in explosion or fire. Keep dry Do not immerse in or expose to water or rain. Failure to observe this precaution could result in fire or electric shock. Do not handle with wet hands Failure to observe this precaution could result in electric shock. Keep out of reach of children Failure to observe this precaution could result in injury. Do not expose to high temperatures Do not leave the device in a closed vehicle under the sun or in other areas subject to extremely high temperatures. Failure to observe this precaution could result in fire or in damage to the casing or internal parts. CD-ROMs The CD-ROMs on which the software and manuals are distributed should not be played back on audio CD equipment. Playing CD-ROMs on an audio CD player could cause hearing loss or damage the equipment. 2 Follow the instructions of hospital and airline personnel This device emits radio frequency radiation that could interfere with medical or navigational equipment. Do not use this device in a hospital or on board an airplane without first obtaining the permission of hospital or airline staff. Notices No part of the manuals included with this product may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form, by any means, without Nikons prior written permission. Nikon reserves the right to change the specifications of the hardware and software described in these manuals at any time and without prior notice. Nikon will not be held liable for any damages resulting from the use of this product. While every effort has been made to ensure that the information in these manuals is accurate and complete, we would appreciate it were you to bring any errors or omissions to the attention of the Nikon representative in your area (address provided separately). This product, which contains encryption software developed in the United States, is controlled by the United States Export Administration Regulations and may not be exported or re-exported to any country to which the United States embargoes goods. As of August 2007 the following countries were subject to embargo: Cuba, Iran, North Korea, Sudan, and Syria. 4 Notice for Customers in the U.S.A This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Use of 5.15-5.25GHz band 5.15-5.25GHz band is restricted to indoor operations only. Compliance with FCC requirement 15.407(c) Data transmission is always initiated by software, which is the passed down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this device automatically discontinue transmission in case of either absence of information to transmit or operational failure. Co-location This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. California proposition 65 under investigation FCC/IC RF Exposure Statement The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. WT-5A has been tested and found to comply with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. Please refer to the SAR test report that was uploaded to FCC website. 6 Notice for Customers in Canada IC RSS-Gen Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,including interference that may cause undesired operation of the device. Use of 5.15-5.25GHz band 5.15-5.25GHz band is restricted to indoor operations only. FCC/IC RF Exposure Statement The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. WT-5A has been tested and found to comply with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. Please refer to the SAR test report that was uploaded to FCC website. Compliance with IC requirement RSS-210 Annex9.4(4) The device shall automatically discontinue transmission in case of absence of information to transmit, or operational failure. A description on how this is done shall accompany the application for equipment certification. Note that this is not intended to prohibit transmission of control or signalling information or the use of repetitive codes where required by the technology. Notice for Customers in Europe R&TTE Directive We, the manufacturer (Nikon Corporation) hereby declare that this Wireless Transmitter (WT-5) is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. AT EE IE NL ES CH BE BG CY CZ DK FI FR DE GR HU IT LU MT SI PL SE GB NO LV PT RO SK LI IS LT Outdoor use limited to 10mW eirp within the band 2454-2483.5MHz Notice for Customers in France Outdoor use of wireless tranceivers is prohibited within the band 2454-2483.5MHz Symbol for Separate Collection in European Countries The following apply only to users in European countries:

This symbol indicates that this product is to be collected separately. This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste. For more information, contact the retailer or the local authorities in charge of waste management. Declaration of Conformity If you want to get a copy of the original DoC of our products which relates to the R&TTE, please contact our web address:

http://

8 We need to decide how to describe DoC. Notice for Customers in Korea Contact Nikon Corporation Korean Branch ;Tentative Telephone Website Caution in use of wireless LAN products Information in use of wireless LAN products Notice for Customers in Thailand This telecommunication equipment conforms to NTC technical requirement. Notice for Customers in Brazil ANATEL Website Para consultas, visite: www.anatel.gov.br Tentative Notice for Customers in Taiwan Caution in use of wireless LAN products 10 Notice for Customers in Mexico Caution in use of wireless LAN products Este equipo opera a titulo secundario, consecuentemente, debe aceptar interferencias perjudiciales incluyendo equipos de la misma clase y puede no causar interferencias a sistemas operando a titulo primario. Notice for Customers in China Caution in use of wireless LAN products

<2.4GHz>

1. 2.4 - 2.4835 GHz

(EIRP) 10dBi 100 mW 20 dBm 10dBi 20 dBm / MHz(EIRP) 20 ppm

( 2.4-2.4835GHz )

()(2.5 )

-36 dBm / 100 kHz (30 - 1000 MHz)

-33 dBm / 100 kHz (2.4 - 2.4835 GHz)

-40 dBm / 1 MHz (3.4 - 3.53 GHz)

-40 dBm / 1 MHz (5.725 - 5.85 GHz)

-30 dBm / 1 MHz ( 1 - 12.75 GHz)

-80 dBm / Hz (EIRP) 2.() 3. 4. 5.

<5GHz>

1. 5725 - 5850 MHz 500 mW 27 dBm

(EIRP)2 W 33 dBm 12 13 dBm / MHz 19 dBm / MHz (EIRP) 20 ppm

(EIRP)-80 dBm / Hz (5725MHz 5850MHz)

()-36 dBm / 100 kHz (30 ~ 1000 MHz)

-40 dBm / 1 MHz (2400 ~ 2483.5 MHz)

-40 dBm / 1 MHz (3400 ~ 3530 MHz)

-33 dBm / 100 kHz (5725 ~ 5850 MHz)

( 2.5 )

-30 dBm / 1 MHz ( 1 ~ 40 GHz) 2.() 3. 4. 5. Warning on use of wireless functions Any users with implantable cardiac pacemakers should make this product apart from the pacemakers by 30 cm or longer. The pacemakers may be influenced by radio waves radiated from this product. In places where people may be close to one another such as crowded trains, turn off the power of the WT-5 or disable the wireless LAN feature. This is because WT-5 may be close to people using medical devices including cardiac pacemakers or rearing aids and have bad influences on the medical devices. Turn off this product or turn of all wireless communication functions, such as wireless LAN, where medical institutions prohibit use of this product. Turn off this product or turn of all wireless communication functions, such as wireless LAN, if a medical device is used nearby, even if use of this product is permitted by a relevant medical institution. Failure to follow this instruction may have some influences on medical equipment to cause accidents by malfunctions. For details, contact the medical institutions where this product may be used. Turn off this product or turn off the wireless communication functions, such as wireless LAN, when use of wireless or electronic devices in aircraft is prohibited. This product may have bad influences on electronic devices to cause accidents. For details, contact airline companies operating aircraft where this product may be used. If this product induces radio disturbance to other devices during use of some wireless feature, disable the wireless feature or stop using this product. Failure to follow this instruction may have some influences on other devices to cause accidents by malfunctions. 14 Introduction Thank you for your purchase of the WT-5 Wireless Transmitter for compatible Nikon digital cameras.The WT-5 is for use exclusively in the country of sales;

operation in other jurisdictions is not guaranteed. Users who are unsure as to the country of purchase are requested to cantact a Nikon-authorized service representative for more information. Please read this manual thoroughly and kiip it where all those who use the product can read it. The principal difference between the WT-5 and WT-5A/B/C/D is in the number of channels supported; unless otherwise stated ,all refercences to the WT-5 also apply to the WT-5A/B/C/D. The following symbols and conventions are used throughout this manual:

Parts of the WT-5 4 2 1 1. Attachment knob Turn the attachment knob to attach to the camera. 2. Connector for Camera connection Connect the WT-5 to the camera. 3. Eyelet for strap You can use the strap through the eyelet for strap in the WT-5. 4. Status LED Status LED glows green when the WT-5 is connected to the network by 3 infrastracture mode or adhoc mode and ready. Status LED blinks with green when the WT-5 is accessing PC or FTP server. Status LED glows orange when the network error has occurred. 16 Tentative Supported Modes The WT-5 connects the camera to wireless and Ethernet networks. Photographs on the camera can then be previewed on the computer or transmitted to an ftp server or printer and the camera controlled remotely from a computer. The WT-5 supports the following modes:

Mode Transfer mode Host Computer or FTP server PC mode Computer HTTP mode Computer Linked shooting mode Master camera See xx Description Upload new or existing photographs to host. Control camera from computer using optional Camera Control Pro* software. xx Download new or existing photographs xx by Web server from camera. With linked shooting, up to 10 slave cameras can be linked in a wireless network to the master camera on which you will release the shutter. xx Before data can be transferred over a wireless or Ethernet network, the camera must be supplied with a network profile providing information on the host computer or ftp server. Tentative Workflow When using the WT-5 for the first time, follow the steps below to set up the WT-5, install the required software, create a wireless network, and upload pictures to the computer. 1 Set up the WT-5 and install software (pp. xxxx).. 1-1 Preparing the Camera 1-2 Preparing the WT-5 1-3 Installing Software 2 Configuring the Network (pp. xxxx). See pages pp. xxxx for information on Windows 7. See pages pp. xxxx for information on Windows Vista. See pages pp. xxxx for information on Windows XP. See pages pp. xxxx for information on Mac OS X. 3 Upload pictures. Upload pictures to a host computer/ PC Mode/HTTP Mode(pp. xxxx). 3-1 Copying Network Profiles to the Camera 3-2 Connecting the WT-5 3-3 Uploading Images Uploading Images to an ftp Server (pp. xxxx). 3-1 Creating an ftp Server 3-2 Copying Network Profiles to the Camera 3-3 Connecting to the ftp Server 3-4 Uploading Images 18 Connecting the WT-5 Before connecting the WT-5, and confirm that the host computer is running. 1 Turn the camera off and insert the memory card containing the pictures to be sent (if the camera is equipped with multiple memory card slots, the card can be inserted into any slot). 2 Connect the WT-5 to the Camera and turn the attachment knob to attach to 3 Turn the camera on. the camera. Specifications Wireless Transmitter WT-5/WT-5A/WT-5B/WT-5C/WT-5D Standards Communications protocols Operating frequency Range

(line of sight) *

Data rates Security WiFi Access protocols Power consumption Operating environment Weight Dimensions

(W H D) WT-5 / WT-5A / WT-5B / WT-5C:

802.11a/b/g/n, ARIB STD-T66, ARIB STD-T71 WT-5D: 802.11b/g/n, ARIB STD-T66 IEEE 802.11a/g: OFDM-BPSK, QPSK, 16QAM, 64QAM IEEE 802.11b: DBPSK, DQPSK, CCK IEEE 802.11n-HT20: QPSK, 16QAM IEEE 802.11n-HT40: OFDM-BPSK, QPSK, 16QAM WT-5: 5180-5320 MHz (36/40/44/48/52/56/60/64 ch) 5500-5700 MHz(100/104/108/112/116/120/124/

128/132/136/140 ch) 2412-2472 MHz (113 ch) WT-5A: 5180-5240 MHz (36/40/44/48 ch) 5745-5825 MHz (149/153/157/161/165 ch) 2412-2462 MHz (111 ch) WT-5B: 5180-5320 MHz (36/40/44/48/52/56/60/64 ch) 2412-2472 MHz (113 ch) WT-5C: 5745-5825 MHz (149/153/157/161/165 ch) 2412-2472 MHz (113 ch) WT-5D: 2412-2462 MHz (111 ch) IEEE802.11a: Approximately 200 m (656.2ft.) IEEE802.11b/g: Approximately 250m (820.2 ft.) IEEE 802.11a/g: 6, 9, 12, 18, 24, 36, 48 and 54 Mbps IEEE 802.11b: 1, 2, 5.5 and 11 Mbps IEEE 802.11n-HT20:6.5, 13, 19.5, 26, 39, 52, 58.5, 72 IEEE 802.11n-HT40:15, 30, 45, 60, 90, 120, 135, 150 Mbps Mbps TKIP, AES, 128/64-bit (104/40-bit) WEP WPA, WPA2, WPS Infrastructure/ad-hoc 1.2W Maximum Temperature: -1040 C (14104 F) Humidity: less than 85% (no condensation) 26.5g / 0.93oz. 41.4mm 32.0 mm 29.6 mm

(1.66 in. 1.28 in. 1.18 in.)

(excluding projections)

* With large antenna at wireless LAN access point. Range may vary with signal strength and presence or absence of obstacles. Maximum logical data rates according to IEEE standard. Actual rates 20 may differ. Users Manual Wireless Transmitter WT-5 Ver. 0.13 Feb. 2012 Printed in Japan

		frequency	equipment class	purpose
1	2012-02-14	5755 ~ 5795	DTS - Digital Transmission System	Original Equipment
2		5270 ~ 5310	NII - Unlicensed National Information Infrastructure TX

Application Forms

app s	Applicant Information
1 2	Effective	2012-02-14
1 2	Applicant's complete, legal business name	Nikon Corporation
1 2	FCC Registration Number (FRN)	0009243569
1 2	Physical Address	Shinagawa Intercity Tower C, 2-15-3, Konan
1 2		Tokyo, N/A 108-6290
1 2		Japan

app s	TCB Information
1 2	TCB Application Email Address	e******@ul.com
1 2	TCB Scope	A4: UNII devices & low power transmitters using spread spectrum techniques

app s	FCC ID
1 2	Grantee Code	CGJ
1 2	Equipment Product Code	1148EA

app s	Person at the applicant's address to receive grant or for contact
1 2	Name	T** K****
1 2	Telephone Number	+81-3********
1 2	Fax Number	+81-3********
1 2	E-mail	T******@nikon.com

app s	Technical Contact
1 2	Firm Name	UL Japan, Inc.
1 2	Name	T** H******
1 2	Physical Address	4383-326 Asama-cho, Ise-shi
1 2		Mie-ken, 516-0021
1 2		Japan
1 2	Telephone Number	81 59********
1 2	Fax Number	81 59********
1 2	E-mail	T******@ul.com

app s	Non Technical Contact
		n/a

app s	Confidentiality (long or short term)
1 2	Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	Yes
1 2	Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	No
	if no date is supplied, the release date will be set to 45 calendar days past the date of grant.

app s	Cognitive Radio & Software Defined Radio, Class, etc
1 2	Is this application for software defined/cognitive radio authorization?	No
1 2	Equipment Class	DTS - Digital Transmission System
1 2	Equipment Class	NII - Unlicensed National Information Infrastructure TX
1 2	Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)	Wireless Transmitter
1 2	Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?	No
1 2	Modular Equipment Type	Does not apply
1 2	Purpose / Application is for	Original Equipment
1 2	Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?	Yes
1 2	Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?	No
1 2	Grant Comments	Power Output listed is Conducted. End-users must be provided with specific information required to satisfy RF exposure Compliance as noted in this filing. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. Maximum measured SAR value: 0.79 W/kg (Body).
1 2	Grant Comments	Power Output listed is Conducted. End-users must be provided with specific information required to satisfy RF exposure compliance as noted in this filing. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. Maximum measured SAR value: 0.52 W/kg (Body). Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.
1 2	Is there an equipment authorization waiver associated with this application?	No
1 2	If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?	No

app s	Test Firm Name and Contact Information
1 2	Firm Name	UL Japan, Inc. Head office EMC Lab.
1 2	Name	T****** H**
1 2	Telephone Number	+81-5********
1 2	Fax Number	+81-5********
1 2	E-mail	T******@jp.ul.com

Equipment Specifications
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
1	1	15C	CC	2412	2462	0.033
1	2	15C	CC	2412	2462	0.1611
1	3	15C	CC	2422	2452	0.0832
1	4	15C	CC	5745	5825	0.1303
1	5	15C	CC	5755	5795	0.1403
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
2	1	15E	CC ND	5180	5240	0.0108
2	2	15E	CC ND	5260	5320	0.0103
2	3	15E	CC ND	5190	5230	0.0094
2	4	15E	CC ND	5270	5310	0.009

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

recent releases: 2ASRT-NPX750 Screeneo Innovation SA 2BL6K-V06 Shenzhen Monkey Creative Technology Co., Ltd. 2AS9406 SG Wireless Limited 2BLLU-S21 Shenzhen KEP Technology CO., Ltd 2BDUR-3304449 RADIOSHACK WORLDWIDE CORP.