FCC ID: 2BC3N-NINA NINA V2

Instruction for Use Instruction for Use (IFU) for IoT Device for Large Venues Product Name: NINA V2 Model Number: NINA V2 FCC ID: 2BC3N-NINA Version: [Software/Firmware Version]

Table of Contents 1. Device Overview Intended Use Introduction 1.1. 1.2. Safety Information Product Description System Requirements Installation & Setup 2. 3. 4. 5. 6. Operational Guidelines 6.1. General 6.2. Troubleshooting LED Guide 7. 8. Maintenance 9. 10. 11. Warranty & Support Information 12. Disposal Technical Specifications Compliance & Regulatory Information 1. Introduction This manual is an instruction manual for NINA, a device specially designed to enhance connectivity and automation in large venues. Please read the entire IFU to ensure the safe and effective use of this device. 1.1. Device Overview NINA is an innovative IoT device crafted for the purpose of self service in the worlds of hospitality and large venues. Some key features include:

Wireless Connectivity: NINA offers WiFi connectivity for easy and quick connection to personal devices. NFC Reading: An NFC reader allows the NINA to know exactly which bottle the user wishes to pour from. Remote Control: With an easy-to-use web app compatible with all smart devices. Built-in Indicators: NINA is equipped with an LED ring which allows the user to know the devices real time status. 1.2. Intended Use NINA is a smart pourer intended for hard liquors. The device works in unison with a locking cap placed on each of the bottles intended for use, and a web app. Please use the device only for its intended purpose, and on bottles with fitted caps. 2. Safety Information WARNING: Always keep the device away from water and direct sunlight. CAUTION: Do not attempt to open or repair the device yourself. Refer to the authorized service provider. 3. Product Description The NINA Smart Pourer is provided along with a tted locking cap and a special charger:

4. System Requirements Power Source: The NINA Charger can connect to a standard 5V 1A wall plug. Connectivity: NINA connects to a 2.4GHz WiFi Storage: When not in use, please store the device away from excessive heat, moisture, or sunlight. Compatibility: The NINA Web App is compatible with all smart devices with an internet connection. 5. Installation & Setup Before getting started, a locking cap must be installed onto each of the bottles intended for use. Simply insert the lock into the neck of the bottle and twist the bronze colored top until resistance is met. To make sure the bottle is sealed properly, flip the bottle and make sure no liquid comes out. To start using NINA, you must first enter the web app. A printed QR code is placed next to the drinking setup, scan it with your mobile device and you should be transported to the corresponding website. To use the app, you must first sign in to your account. If this is your first time using NINA, the app will ask you several identification questions. After signing in you are good to go! To pour a drink, simply place the NINA device on top of a bottle of your choosing. A picture of your chosen bottle should now appear on your app screens selection bar, select the bottle and press the drink button. You can start pouring once the app tells you to and the LEDs on the NINA start lighting in a rotational motion. Tilt the bottle and NINA will automatically start pouring. The device stops the flow automatically after one shot, but you may stop ahead of that by simply returning the bottle to an upright position and pressing the Stop button. Once you are finished, you may place the NINA on any other bottle and repeat the process. If the NINA is not currently in use, it is best to place it on the charger. 6. Operational Guidelines 6.1. General At the bottom of the NINA device is a small, sunken button used to turn the device on and off. To access it you will need a pin similar to the one used to extract SIM cards. Press for 2 seconds to turn on/off. Press for 7 seconds to restart the device. NINA works with a WiFi connection. Firmware updates can be pushed remotely granted the device is connected to a network. 6.2. LED Guide NINA is equipped with an LED strip for indication of various statuses:

LED Blue White Red Rotating Orange Green Status Attempting to connect to WiFi Connected to WiFi Error Ready to pour Charging Fully Charged 7. Troubleshooting Problem Solution 8. Maintenance Cleaning: NINA is an IP55 device. In order to clean it, you may run only water through the liquid tube. The exterior may be cleaned with a damp rug or wipe. DO NOT submerge the device in water. Charging: The device is powered by a rechargeable 3.7V battery. It may only be charged by the provided charging port, which can be connected to a standard 5V 1A wall plug. To extend battery life, please store the device in a cool area with no direct sunlight exposure. Firmware: Updates are pushed remotely while the device is connected to a network. If the device seems to be having problems, please contact us. Do not attempt to fix it yourself!

9. Disposal 8. Disposal and Environmental Considerations 8.1. End-of-Life Instructions 8.2. Recycling Information Please dispose of the device in accordance with local electronic waste regulations. Do not dispose of in regular trash. 10. Technical Specications Parameter Value Dimensions

[H x W x D] cm Weight Connectivity Battery Life

[X] kg 2.4Ghz wi 20 Hours

... .. 11. Warranty & Support Information 7. Warranty and Support 7.1. Warranty Coverage 7.2. Contact Information for Support 7.3. Returns and Repairs Warranty Period: [X years/months]

Support Contact: [Phone number, email, website]

12. Compliance & Regulatory Information This device complies with [relevant regulations, e.g., FCC, CE, etc.]. For more information, visit [website or contact info]. Note: Always keep this IFU handy for future reference. Ensure all operators of the device are familiar with these instructions. Class B Warnings Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

a) Reorient or relocate the receiving antenna. b) Increase the separation between the equipment and receiver. c) Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. d) Consult the dealer or an experienced radio/TV technician. Modification statements NINA Labs LTD has not approved any changes or modifications to this device by the user. Any changes or modifications could void the users authority to operate the equipment. RF Exposure Warnings RF Exposure - This device has been tested for compliance with FCC RF exposure limits in a portable configuration. This device must not be used with any other antenna or transmitter that has not been approved to operate in conjunction with this device. Interference statement This device complies with Part 15 of the FCC Rules and standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Wireless notice This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and radio frequency

(RF) Exposure rules. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The distance between user and device should be no less than 20cm.

DATE : 2023-11-17 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Jason Wu of Global United Technology Services Co., Ltd.and No.

,d123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Roa siBaoan District, Shenzhen, Guangdong, China to act as our agent in the preparation of th cribesapplication for equipment certification. I certify that submitted documents properly de ch unitathe device or system for which equipment certification is sought. I also certify that e manufactured, imported or marketed, as defined in the Federal Communications rCommissions regulations will have affixed to it a label identical to that submitted fo

. approval with this application For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with NINA Labs LTD and 2 Menorat Ha'maor St.Tel Aviv, Israel 6744830 Signature:

Name: Tal Lotan Title: CTO Company: NINA Labs LTD

NINA Labs LTD DATE : 11/02/2023 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2BC3N-NINA Product Name: NINA V2 Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:

Schematics Block diagram Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Pursuant to Sections 0.457 and 0.459 of the commission rules, and in accordance with the FCC Public notice dated June 15, 2004 (DA 04-1705), we hereby request short-term confidentiality for the following items prior to marketing the device.:

Test Setup Photos External Photos Internal Photos User Manual The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Signature:

Name: Tal Lotan Title: CTO Company: NINA Labs LTD

NINA Labs LTD Covered Equipment Certification Attestation Letter Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: 2BC3N-NINA NINA Labs LTD certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not covered equipment. NINA Labs LTD certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Signed:

Printed name: Tal Lotan Title: CTO Company Name: NINA Labs LTD Date: 11/2/2023

NINA Labs LTD Section 2.911(d)(7) USA Agent for Service of Process Company name: NINA Labs LTD Address: 2 Menorat Ha'maor St.Tel Aviv, Israel 6744830 Product Name: NINA V2 FCC ID: 2BC3N-NINA Model(s): NINA V2 2.911(d)(7) USA Designated Agent for Service of Process We, [NINA Labs LTD] designate [NINA Inc.]NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent:We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation:We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email add ress for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Applicant Company name: NINA Inc. Address: 3265 RAMOS CIR SACRAMENTO CA 95827-2500, California, USA FRN: 0034584243 Contact Name: Ilan Frank Telephone No: (916) 743-8715 Email: usrep@drinknina.com Company name: NINA Labs LTD Address: 2 Menorat Ha'maor St.Tel Aviv, Israel 6744830 FRN: 0034172676 Contact Name: Tal Lotan Telephone No: 052-656-7378 Email: yoramfc@drinknina.com Signature:

Signature:

Title: Director Date: 11/14/2023 Title: CTO Date: 10/31/2023 NINA Labs LTD NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the