User Manual 1 Product overview Bluetooth Box is a data transmission device for Segway Dirt eBike.The device has Bluetooth ble communication function. It can communicate with the mobile phone via Bluetooth data, and transmit the real-time parameter information of the vehicle directly to the mobile phone.Users can view the vehicle location and status remotely through the mobile app.With the help of CAN bus on the equipment, Users can communicate with vehicle controller to obtain vehicle status parameters.Users can view the vehicle parameters (such as the remaining power of the whole vehicle, vehicle temperature, etc.) through the Mobile phone APP and control the vehicle. 2 Technical parameters Product nameBluetooth Box ModelNB-BTBOXW12 Rated voltageDC12V Rated current5mADC12V input Bluetooth band2.400GHz-2.4835GHz Bluetooth modeBLE4.0 dimension80*42*16.8mm working temperature-20~+65 Storage temperature-40~+85 3 Instructions The figure below shows the device interfaceincluding 12V power supply, GND,485-A and 485-B.Through this interface, the vehicle can send the data to Bluetooth Box.
Federal Communications Commission (FCC) Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. RF exposure warning This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This product may not be collocated or operated in conjunction with any other antenna or transmitter. Industry Canada (IC) CAN ICES-3 (B)/NMB-3(B) This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Cetappareilestconforme la norme RSS d'Industrie Canada. Son fonctionnementestsujet aux deux conditions suivantes:
(1) ledispositif ne doit pas produire de brouillageprjudiciable, et
(2) cedispositifdoit accepter tout brouillagereu, y compris un brouillage susceptible de provoquer un fonctionnementindsirable. IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.. Dclarationd'exposition aux radiations:
Cetquipementestconforme aux limitesd'exposition aux rayonnements IC tablies pour unenvironnement non contrl.