Ninebot Telematics Box specification Ninebot Telematics Box specification 1. Product overview Ninebot Telematics Box includes the functions of 4G networking, Bluetooth, mass storage and encryption.As the data transmission terminal of the electric motorcycle, Ninebot Telematics Box can Can control vehicle switch on / off through Bluetooth or remote network unlocking, and can realize the fast access unlocking function.It can also obtain the vehicle information through the serial port, and then report the vehicle status and position information to cloud server to realize the real-time monitoring of the whole vehicle. 2. Basic parameters Item Dimensions Rated voltage Rated current parameters 85mm*85mm*43mm DC:40-110V working condition72V@70mA Low power state4V@4mA
-20~+85 working temperature Charging temperature
<42 1 / 6 Ninebot Telematics Box specification 4. RF parameters Item parameters EC25-EUX(Europe / Middle East / Africa / Korea / Thailand EC25-AFX(North America EC25-AUX(South America/ Australia,/New Zealand) EC25-J(Japan EC21-KL(South Korea EC25-MXMexico EC20-CE(China / India LTE CAT4/UMTS/EGPRS Hardware version technical characteristics EC25-EUX:
LTE FDD: B1/B3/B7/B8/B20/B28A LTE TDD:B38/B40/B41 WCDMA: B1/B8 GSM: B3/B8 EC25-AFX:
LTE FDD: B2/B4/B5/B12/B13/B14/B66/B71 WCDMA: B2/B4/B5 EC25-AUX:
LTE FDD: B1/B2/B3/B4/B5/B7/B8/B28 LTE TDD: B40 WCDMA: B1/B2/B4/B5/B8 GSM: B2/B3/B5/B8 EC25-J:
LTE FDD: B1/B3/B8/B18/B19/B26 LTE TDD: B41 WCDMA: B1/B6/B8/B19 EC21-KL:
LTE FDD:B1/B3/B5/B7/B8 EC25-MX:
LTE FDD: B2/B4/B5/B7/B8/B66 WCDMA: B2/B4/B5 EC20-CE LTE FDD: B1/B3/B5/B8 LTE TDD: B34/B38/B39/B40/B41 WCDMA: B1/B8 TD-SCDMA: B34/B39 CDMA: BC0 GSM: 900/1800MHz EDGE: 296Kbps (DL)/ 236.8Kbps (UL) GPRS: 107Kbps (DL)/ 85.6Kbps (UL) 2 / 6 Working frequency band GSM features Ninebot Telematics Box specification UMTS features LTE features DC-HSDPA: 42Mbps (DL) HSUPA: 5.76Mbps (UL) WCDMA: 384Kbps (DL)/ 384Kbps (UL) LTE FDD: 150Mbps (DL)/ 50Mbps (UL) LTE TDD: 130Mbps (DL)/ 30Mbps (UL) Transmitting power Receiving sensitivity GSM850/GSM90033dBm2dB DCS1800/PCS1900 :30dBm2dB WCDMA:24dBm+1/-3dB LTE-FDD /LTE-TDD :23dBm2dB LTE:-102.5dB--99dB WCDMA:-110dB GSM850/EGSM900/DCS1800/PCS1900: -109dBm Network protocol TCP/UDP/PPP/FTP/FTPS/HTTP/HTTPS/NTP/PING/QMI/NITZ/
MMS/SMTP/SSL/MQTT/FILE 5. GPS parameters Item Model Frequency HDOP Item BLE Chip Frequency Receiving sensitivity parameters UM220-IV NL BD2 B1 GPS L1 GLONASS L1
<2.5m CEP parameters NRF51802 2.4GHz
-91dBm 6. BLE parameters 7. Other technical parameters Item parameters Main processor STM32G070CBT6:
Core: Cortex-M0+
Flash memory: 128K bytes Ram: 36k bytes Serial port 115200bps 3 / 6 Ninebot Telematics Box specification Federal Communications Commission (FCC) Compliance Statement for USA This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Industry Canada (IC) Compliance Statement for Canada This device contains licence-exempt transmitter(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1. Lappareil ne doit pas produire de brouillage;
2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Cet quipement est conforme aux limites d'exposition aux radiations IC CNR-102 tablies pour un environnement non contrl. Cet metteur ne doit pas tre situ ou fonctionner conjointement avec une autre antenne ou un autre metteur. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et votre corps. Nine Tech Co., Ltd. is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user's authority to operate the equipment. 4 / 6 Ninebot Telematics Box specification Ninebot Telematics Box(model N-A-LTEC72-U) FCC ID:2AU2Y-JH0001 IC:25633-JH0001 Contains FCC ID:XMR201909EC25AFX IC10224A-2019EC25AFX Important WEEE information WEEE Disposal and Recycling Information Correct Disposal of this product. This marking indicates that this product should not be disposal with other household wastes through out the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsible to promote the sustainable reuse of materials resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling. Battery recycling information for the European Union Batteries or packaging for batteries are labeled in accordance with European Directive 2006/66/EC and amendment 2013/56/EU concerning batteries and accumulators and waste batteries and accumulators. The Directive determines the framework for the return and recycling of used batteries and accumulators as applicable throughout the European Union. This label is applied to various batteries to indicate that the battery is not to be thrown away, but rather reclaimed upon end of life per this Directive. In accordance with the European Directive 2006/66/EC and amendment 2013/56/EU, batteries and accumulators are labeled to indicate that they are to be collected separately and recycled at end of life. The label on the battery may also include a chemical symbol for the metal concerned in the battery (Pb for lead, Hg for mercury, and Cd for cadmium). Users of batteries and accumulators must not dispose of batteries and accumulators as unsorted municipal waste, but use the collection framework available to customers for the return, recycling, and treatment of batteries and accumulators. Customer participation is important to minimize any potential effects of batteries and accumulators on the environment and human health due to the potential presence of hazardous substances. Before placing electrical and electronic equipment (EEE) in the waste collection stream or in waste collection facilities, the end user of equipment containing batteries and/or accumulators must remove those batteries and accumulators for separate collection. Restriction of Hazardous Substances (RoHS) Directive This Ninebot (Changzhou) Tech Co., Ltd. product, with included parts (cables, cords, and so on) meets the requirements of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment ( RoHS recast or RoHS 2). Radio Equipment Directive 5 / 6 Ninebot Telematics Box specification Segway Europe BV, Hogehilweg 8, 1101 CC Amsterdam, The Netherlands. Hereby, Ninebot (Changzhou) Tech Co., Ltd, declares that the wireless equipment listed in this section are in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. 6 / 6