x/x mm 80*120 mm L*W*H mm 480*120 mm 0.5mm 1mm EPE
+5mm/-3mm PE 0~200mm 2mm 20~500mm 3mm 500mm 5mm 3mm 5mm
(EPS/
:0~400mm 2mm 400~600mm 3mm 600mm 4mm
:+2/-0mm Product Overview First Use App Activation Registering a Fingerprint Thank you for choosing Segway Bluetooth Fingerprint U-Lock (referred to as When using for the rst time, you can use any ngerprint to unlock. Please
"the ngerprint lock" in this manual). This product is easy to use and energy follow the steps below:
ecient. It has high sensitivity, a high recognition rate, and can be unlocked in under a second. 1 Remove the protective cover from the ngerprint panel. Segway B lueto ot h F ingerprin t U - Lo ck Use r M anu al Lock shackle Lock head Keyhole Charging port Fingerprint panel Indicator light Accessories:
Segway-Ninebot App Scan the QR code above to install the Segway-Ninebot app (referred to as "the app" in this manual) . Follow the prompts to activate the ngerprint lock and complete owner authentication. Keep your phone close to the lock to ensure 2 Press the ngerprint panel until you hear a long beep and the indicator light Bluetooth signal. turns blue. 1 After installing the app, please register or log in. Blue Open the app and go to the ngerprint lock main page. Go to "Fingerprint Management" > "Add New Fingerprint" and follow the prompts. Blue light on + one beep Red light on + two beeps After a ngerprint has been successfully registered 6 times, it can be used to open the lock. The indicator light will turn blue and you will hear a long beep.
* When registering your ngerprint, make sure to fully cover the ngerprint sensor with your nger at dierent angles.
* Make sure your ngers are clean and dry. NOTE:
the app. soon. You can add, delete, and name the ngerprints, and view unlocking history in If the ngerprint lock does not respond, check its battery level in the app. If the indicator light flashes red and beeps continuously, please charge the device ngerprint lock interface, and then tap "Device Settings" > "Restore Factory Settings" to clear all records. Se gway Blue tooth Fingerprint U -Lock User Manu al Before using the product, please read the manual carefully and keep it for future reference. USB cable 1 Spare key * 2 User manual 1
* Please keep the spare keys in a safe place. Segway does not sell or provide replacement keys. your ngerprints. After unlocking, please follow the instructions to activate the lock and register 2 Tap "Search Device" to nd and connect your ngerprint lock. one beep. After connection is successful, the indicator light turns yellow, and you will hear Before giving away or reselling the ngerprint lock, tap the " " icon on the Before using the product, please read the manual carefully and keep it for future reference. The pictures in this manual are for illustration purposes only. The actual product, app features and interface may dier. 3 Follow the prompts to complete product activation and owner authentication. www.segway.com Unlocking Locking Charging Product Specications Certications You can use any of the following methods to open the ngerprint lock:
Pass the lock shackle through the wheel or hub, and then align it with the lock Use the USB cable to connect a USB charger to the charging port. Then, plug a. Verify the ngerprint. b. Open the app and tap c. Remove the rubber head. Press the shackle into the head to lock. the "Unlock" icon on the plug and use the spare Ninebot KickScooter series ngerprint lock interface. key to unlock. the charger into a power outlet. CAUTION The output voltage of the charging plug should not exceed 5 V, and the charging current should not exceed 1 A. 8.7 5.7 1.2 in (221 145 30 mm) FCC Caution: Any changes or modifications not expressly approved by the party Fingerprint Unlock Unlock Management Unlocking history NOTE:
If the verication fails 10 consecutive times, the ngerprint lock will be frozen for 60 seconds. During this time, you can open the lock via the app or with a spare key. Ninebot eMoped series CAUTION: To prevent damage, keep the ngerprint lock o the ground, avoid heavy rain and large puddles. The indicator light stays red during charging and turns o when charging is complete. WARNING materials. 1. Store the ngerprint lock in a dry place away from flammable and explosive paper towel. Do not wipe with water, alcohol or other chemicals. 3. Avoid exposure to liquids. 4. Keep the charging port and keyhole free from dust and debris. 5. Cover the ngerprint panel protective cover and keyhole when not in use. 2. Keep the ngerprint lock dry and clean. You can clean it with a dry cloth or Charging port Micro USB Product name Segway Bluetooth Fingerprint U-Lock Model PJ02ZWS Ninebot eMoped series Ninebot KickScooter series Applicable models Product dimensions
(L W H) Lock shackle diameter 0.5 in (12 mm) Net weight Materials Approx. 2.9 lbs (1.3 kg) Zinc alloy, TPU, stainless steel, ABS Storage temperature
-4185 F (-2085 C) Working temperature 14140 F (-1060 C) Charging time Approx. 4 hours Resolution Pixels 508 DPI 96*96 Fingerprint capacity 10 ngerprints IP rating IP65 Battery pack parameters Rated voltage: 3.7 V Charging temperature: -4140 F (-2060C) Rated capacity: 400 mAh Rated energy: 1.48 Wh Federal Communications Commission (FCC) Compliance Statement for USA This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. responsible for compliance could void the user's authority to operate this equipment NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. Cet quipement est conforme aux limites d'exposition aux radiations de la IC dnies pour un environnement non contrl. Industry Canada (IC) Compliance Statement for Canada This device complies with Industry Canada license-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-3 (B)/NMB-3(B) Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement."
Neither Segway Inc. nor Ninebot is responsible for any changes or modications not expressly approved by Segway Inc. or Ninebot. Such modications could void the user's authority to operate the equipment. FCC ID: 2AU2Y-JH0002 IC: 25633-JH0002 Trademark and Legal Statement Ninebot is the registered trademark of Ninebot (Tianjin) Tech. Co., Ltd.; The Rider Design is the registered trademarks of Segway Inc.; The respective owners reserve the rights of their trademarks referred to in this manual. We have attempted to include description and instructions for all the functions of Segway Bluetooth Fingerprint U-Lock at the time of printing. However, due to constant improvement of product features and changes of design, your Segway Bluetooth Fingerprint U-Lock may dier slightly from the one shown in this document. Please visit www.segway.com to download the latest user materials. 2020 Ninebot (Beijing) Tech Co., Ltd. All rights reserved. After-sales Service For after-sales service information, please visit our ocial website. The Americas:
Tel: 1-888-523-5583 Web: https://www.segway.com/consumertechsupport/
Others: www.segway.com 1105g 5:
6 2Pantone Cool Gray 11 C PANTONE 1505 C 3 4/
CE.00.0039.34 201221 201221 B A0 A0 1:1 1 1