FCC ID: 2AQJK-AST-WR129 Bamboo Wireless Charger

AST-WR129 Bamboo Wireless charger docking station User Manual NTC protection:

When the continuous working temperature is higher than 60 degrees Celsius, the electric current decreases and if the temperature exceeds 80 degrees Celsius, the charger will be turned off. When the temperature is under 60 degrees Celsius, the charger will resume to work normally. For pen Wireless charging area Indicator light Input port Specification:

Input: DC5V 2AMAX Output: DC5V 1A Wireless power: 5W Whats included:

1 x Bamboo Wireless charger docking station 1 x User Manual 1 x Charging Cable Using the wireless charging:

Plug the stand, using the included micro-USB cable, into the USB port of your adapter. The wireless charging indicator light flashing red and blue for three times, then turns to be red. Make sure your phone is compatible for wireless charging. Put your wireless charging enabled device on the wireless charging surface, the wireless charging indicator light turns to be blue. Warning:

Please pay attention to the following considerations, otherwise it may cause abnormal charging or disinfection. 1.Please put the mobile phone in the center of the charging area. 2.The sensing distance of wireless charging is 2-6mm. When charging the mobile phone wirelessly, please do not assemble the protective case with the thickness more than 3mm. 3.During wireless charging, there shall be no metal or magnetic objects within the distance range of 6cm in diameter from the center point on the back of the mobile phone. 4.The lower temperature, the faster charging speed. The charging speed is faster in winter than in summer. 5.Pay attention to waterproof of the wireless charger. 6.Do not use the device in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury. 7.Do not expose the device to moisture. 8.To reduce the risk of injury, close supervision is necessary when the product is used near children. FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. Indicator light:

When the red light is on, the wireless charger is stand by and the blue indicator lights on, means the wireless charger is working. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Foreign Object Detection:

When wireless charging; if the wireless charging indicator light flashing blue alternately, the device is either NOT a wireless charging device or there is an object between the device and charging surface interfering with the charging process. The distance between user and products should be no less than 20cm.

FCC ID : 2AQJK-AST-WR129 Model No.: AST-WR129 PO:

Input: DC 5V/2A Wireless Charging Output: 5W Made in China 5MM 7MM This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

December 02, 2021 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Shenzhen Timeway Testing Laboratories/ Zone C, 1st Floor, Block B, Jun Xiang Da Building, Zhongshan Park Road West, Tong Le Village, Nanshan District, Shenzhen, China. (Name of Agent company name and address) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commissions regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with NINGBO ALLSTAR O&E TECHNOLOGY CO.,LTD./

NO.19 HUIJIN ROAD,LUOTUO STREET,ZHENHAI, NINGBO, CHINA

<Signature>

NameTeresa Zhong Title CompanyNINGBO ALLSTAR O&E TECHNOLOGY CO., LTD.

December 02, 2021 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AQJK-AST-WR129 Product Name: Bamboo Wireless Charger Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:

(List here the documents for which you are seeking confidentiality for example ) Schematics Block diagram Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors.

<Signature>

NameTeresa Zhong Title CompanyNINGBO ALLSTAR O&E TECHNOLOGY CO., LTD.

FCC ID: 2AQJK-AST-WR129 Product Name: Bamboo Wireless Charger Model No.: AST-WR129, AST-WR129B, AST-WR165, AST-WR080, AST-WR021B,AST-WR081,AST-WR148, AST-WR147, AST-WR150, AST-WR127,AST-WR151, AST-WR018, AST-WR016, AST-WR021. All models are electrically identical , only model no is different.

<Signature>

NameTeresa Zhong CompanyNINGBO ALLSTAR O&E TECHNOLOGY CO., LTD.