55mm 70mm TRUE WIRELESS EARBUDS CHARGING YOUR EARBUDS GETTING STARTED 1 Micro USB charging port 2 Charging Case LED indicators 3 Left earbud LED indicator 4 Left control button 5 Right earbud LED indicator 6 Right control button 7 Left Mic 8 Right Mic 9 Charging Case Power Button For checking capacity only) Left Earbud / Right Earbud Pause/Play/Answer Call/End Call L R 4 3 7 6 5 8 1 2 9 Front MONO MODE
(SINGLE EARBUD USE) Remove earbud from charging case Once earbud is powered on, It will automatically proceed to PAIRING STEREO MODE
(DUAL EARBUD USE) Remove both earbuds from charging case and hold close each other Earbuds will automatically link together after a few seconds and you will hear an alert tone. One of the earbuds will ash red and blue, the other earbud will turn o LED indicator. Note: If the earbuds do not automatically pair after 20 seconds, double press the control button of one earbuds to make both earbuds pair with it. Once Earbuds are linked together you may proceed to pairing with your mobile device. Note: If you attempt to pair before the earbuds have paired to each other, the earbuds will go into single earbud use. In this case, restart the process (Select forget device from your Bluetooth List). Once they are paired successfully, the indicator of one earbuds will turn o. QUICK START GUIDE FCC ID: 2ABHA0069 CHARGING YOUR CASE
--- Charge the charging case, with the included micro-
USB cable for 1.5 hours. The LED indicator ash red during charging and solid red after fully charged Do not charge longer than suggested time. Do not charge overnight. Place Right and Left Earbuds in charging case Charging case LED indicator (2) will illuminate Blue and the earbud LED indicators (3, 5) will illuminate Red, indicating that the earbuds are charging properly. When Earbuds LEDs (3, 5) turns o, earbud batteries are fully charged. PAIRING TWS-i7 Enable Bluetooth search mode on your mobile device and search for pairing name True Wireless headset and select it on your mobile phone. Once the earbuds are successfully paired, a notication will sound . Now you can enjoy your true wireless Bluetooth Earbuds. Function Power On Power O
*Note: Once earbuds have been initially paired successfully with your mobile device, they will automatically pair the next time they are powered on. OPERATING BLUETOOTH EARBUDS Model: SL353 Item No.: 2443 Capacity(Cradle): 300mAh / 3.7V (1.11Wh) Capacity(Earbuds): 35mAh / 3.7V (0.1295Wh) Input of earbuds: 5V / 60mA Input of Cradle: 5V / 250mA Play/Pause Answer Reject Recall Earbuds Power On nk Mode Li Two earbuds paired successfully each other Paired Successfully Power O Earbuds in Cradle Charging Fully Charged Charging Case Operation Press (4) or (6) for 3 seconds or remove the earbuds from charging case Press (4) or (6) for 5 seconds or place the earbuds in the charging case Single press (4) or (6) Single press (4) or (6) Press (4) or (6) for 2 seconds Double (4) or (6) LED indications (3) & (5) Red and Blue LED will ash altemately Flashing Blue + Red One earbuds will ash red and blue, another earbuds will turn o LED indicator. LED O LED O Flash Red Solid Red See CHARGING YOUR CASE Back FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation. Warning:
Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 18 of the FCC Rules The interference potential of the device or system. Maintenance of the system. Simple measures that can be taken by the user to correct interference. For RF lighting devices, provide an advisory statement, either on the product packaging or with other user documentation, similar to the following:
This product may cause interference to radio equipment and should not be installed near maritime safety communications equipment or other critical navigation or communication equipment operating between 0.45-30 MHz. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by
(ShenZhen C-Star Electronic Tech. Co., Ltd.) is under license. Other trademarks and trade names are those of their respective owners. Troubleshooting Problem Reason Solution One earbuds is working but no sound in double earbuds use Two earbuds has not paired successfully each other before paired phone Clear the connecting record of device and follow the instruction to repair again No sound after pairing Incorrect pairing Try pairing process again No indicator during charging Earbuds positioned into cradle incorrectly Readjust earbuds in cradle until indicator glows Automatic shut down Low battery Charge earbuds and Noise, or interruption Earbuds are too far away from device Move device closer to earbuds Bluetooth Listing Declaration ID:D035790 Made in China