55mm TRUE WIRELESS EARBUDS 70mm 1 Micro USB charging port 2 Charging Case LED indicators 3 Left earbud LED indicator 4 Left control touch button 5 Right earbud LED indicator 6 Right control touch button Left Earbud / Right Earbud Pause/Play/Answer Call/End Call L R 4 3 6 5 2 1 GETTING STARTED CHARGING YOUR EARBUDS MONO MODE
(SINGLE EARBUD USE) TART GUIDE QUICK S FCC ID: 2ABHA0065 CHARGING YOUR CASE Charge the charging case, with the included micro USB cable for 1.5 hours. The LED indicator will be lit red during charging and turned o after fully charged Do not charge longer than suggested time. Do not charge overnight. Place Right and Left Earbuds in charging case Charging case LED indicator (2) will illuminate Blue and the earbud LED indicators (3, 5) will illuminate Red, indicating that the earbuds are charging properly. When Earbuds LEDs (3, 5) turns o, earbud batteries are fully charged. Front PAIRING Enable Bluetooth search mode on your mobile device and search for and select pairing name EB45 it on your mobile phone. Once the earbuds are successfully paired, a notication will sound . Now you can enjoy your true wireless Bluetooth Earbuds. TWS-i7
*Note: Once earbuds have been initially paired successfully with your mobile device, they will automatically pair the next time they are powered on. OPERATING BLUETOOTH EARBUDS Model: SL317 Item No.: EB45 Capacity(Cradle): 250mAh / 3.7V (0.925Wh) Capacity(Earbuds): 35mAh / 3.7V (0.1295Wh) Input: 5V/25mA (Earbuds) Input: 5V/300mA (Cradle) Function Power On Power O Play/Pause Answer Reject Recall Earbuds Power On Link Mode Paired Successfully Power O Earbuds in Cradle Charging Fully Charged Operation Press (4) or (6) for 3 seconds or remove the earbuds from charging case Press (4) or (6) for 3 seconds or place the earbuds in the charging case Single press (4) or (6) Single press (4) or (6) Press (4) or (6) for 2 seconds Double (4) or (6) LED indications (3) & (5) Red and Blue LED will ash altemately Flashing Blue + Red Flashing Blue LED O Solid Red LED o Charging Case See CHARGING YOUR CASE Back FCC STATEMENT Note:This equipment has been tested and found to comply with the limits for a class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequence energy and,if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.However,there is no guarantee that interference will not occur in a particular installation.if this equipmemt does cause harmful interference to radio or television reception,which can be determined by turning the equipment o and on,the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an autlet on a circuit dierent from that to which the receiver is connectec. Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The devicecan be used in portable exposure condition without restriction. Remove earbud from charging case Once earbud is powered on, It will automatically proceed to PAIRING STEREO MODE
(DUAL EARBUD USE) Remove both earbuds from charging case E and close each other arbuds will automatically link together after a few seconds, and earbuds will have a tone One earbuds will ash red and blue, another earbuds will ash blue only. Note: Please doule press the control button of one earbuds to make both earbuds pairing each other if they still not paired automatically after 20 seconds. Once Earbuds are linked together you may proceed to pairing with your mobile device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation. Warning:
Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Made in China