55mm TRUE WIRELESS EARBUDS GETTING STARTED CHARGING YOUR CASE CHARGING YOUR EARBUDS 1 Micro USB charging port 2 Charging Case LED indicators 3 Charging Case Power Button 4 Left earbud LED indicator 5 Left control button 6 Right earbud LED indicator 7 Right control button Charge on the go charging case, with the included micro USB cable for 2-3 hours. Do not charge longer than suggested time. Do not charge overnight. When LED is illuminated solid red battery case is fully charged. MONO MODE
(SINGLE EARBUD USE) 70mm L Left Earbud
/
R Right Earbud Pause/Play/Answer Call/End Call, Next Track R L 7 6 5 4 QUICK START GUIDE FCC ID : 2ABHA0066 1 2 3 Charging LED Indicators Flashing RED- Battery Case is charging Solid RED- Battery Case is fully charged Solid BLUE- Battery Case is charging earbuds OFF- Battery Case is o Front Place Right and Left Earbuds in battery case charging cradle and press the power button on the battery case (3) Charging case LED indicator will illuminate Blue and the earbud LED indicators (4, 6) will illuminate Red, indicating that the earbuds are charging properly. When Earbuds LEDs (4, 6) turn solid blue, earbud batteries are fully charged. After earbuds are fully charged, press the charging case power button (3) to turn the charging case OFF. Remove earbud from charging cradle power on by pressing the control button or (5) for 3 seconds depending on whic earbud your using. Once earbud is powered on, proceed STEREO MODE
(DUAL EARBUD USE) Remove both earbuds from charging cradle and place them in your ears. Make sure Bluetooth Search Mode is turned o on your mobile device. Hold the right earbud button (7) for 3 seconds and then press left earbud button
(5) for 3 seconds until they are powered on.
(Earbud LEDs will ash Red and Blue to indicate that they are in Link mode.) Earbuds will automatically link together after a few seconds,and earbuds will have a tone, One earbud will ash red and blue,and the other earbud will ash blue only. Once Earbuds are linked together you may proceed to pairing with your mobile device. PAIRING Enable Bluetooth search mode on your mobile device and search for pairing name CPP-4635 and select it on your mobile phone. Once the earbuds are successfully paired a notication will sound . Now you can enjoy your true wireless Bluetooth Earbuds. TWS-i7
*Note: Once earbuds have been initially paired successfully with your mobile device they will automatically pair the next time they are powered on. Model: CT04001 Item No.: CPP-4635 Capacity(Cradle): 350mAh / 3.7V (1.295Wh) Capacity(Earbuds): 50mAh /3.7V (0.185Wh) Input of earbuds: 5V / 60mA Input of Cradle: 5V / 300mA Back OPERATING BLUETOOTH EARBUDS Function Power On Power O Play/Pause Answer Reject Operation Press (5) or (7) for 3 seconds Press (5) or (7) for 5 seconds Single press (5) or (7) Single press (5) or (7) Press (5) or (7) for 2 seconds Solid Red Solid Blue LED indications (4) & (6) Red and Blue LED will ash altemately One earbud will ash red and blue, and the other earbud will ash blue only. Flashing Blue LED O Earbuds Power On Two earbuds paired each other successfully Paired Successfully Power O Earbuds in Cradle Charging Fully Charged Charging Case FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation. Warning:
Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. See CHARGING YOUR CASE Note:This equipment has been tested and found to comply with the limits for a class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequence energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.However,there is no guarantee that interference will not accor in a particular installation.if this equipmemt does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on,the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an autlet on a circuit dierent from that to which the receiver is connectec. Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The devicecan be used in portable exposure condition without restriction. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by
(ShenZhen C-Star Electronic Tech. Co., Ltd.) is under license. Other trademarks and trade names are those of their respective owners.