55mm
TRUE WIRELESS EARBUDS
GETTING STARTED
CHARGING YOUR EARBUDS
1 Micro USB charging port
2 Charging Case LED indicator
3 Charging Case Power Button
(cid:1)(cid:1)(cid:269)For activing and checking
power)
4 Left earbud LED indicator
5 Left control button
6 Right earbud LED indicator
7 Right control button
8 Left microphone
9 Right microphone
Left Earbud / Right Earbud
70mm
TART GUIDE
QUICK S
FCC ID: 2ABHA0071
Pause/Play/Answer Call/End Call
L
R
4
5
6
7
2
1
3
CHARGING YOUR CASE
8
9
— Charge the charging case, with the included micro
USB cable for 2 hours. The LED indicator will be flashing red
during charging and turn to solid red after fully charged
Do not charge longer than suggested time. Do not charge overnight.
Front
— Place Right and Left Earbuds in charging case
— Charging case LED indicator (2) will illuminate Blue and the
earbud LED indicators (4, 6) will illuminate Red, indicating that
the earbuds are charging properly. When Earbuds LEDs (4, 6)
turns off, earbud batteries are fully charged.
MONO MODE
(SINGLE EARBUD USE)
— Remove earbud from charging case
— Once earbud is powered on, It will automatically
proceed to PAIRING
your mobile device.
You may proceed to pairing with
STEREO MODE
(DUAL EARBUD USE)
— Remove both earbuds from charging case
— E
and close each other
arbuds will automatically link together after
a few seconds, and earbuds will have a tone
One earbuds will flash red and blue,
another earbuds will trun off.
Earbuds are linked together you may
— Once
proceed to pairing with your mobile device.
Note: If you attempt to pair before the earbuds have paired to each
other, the earbuds will go into single earbud use not both. In this
case, restart the process (Please clear the connecting record of
device first if it has paired record).
PAIRING
OPERATING BLUETOOTH EARBUDS
TWS-i7
— Enable Bluetooth search mode on
your mobile device and search for
pairing name “ 32399 ”
and select
it on your mobile phone.
Once the earbuds are successfully
paired, a notification will
sound .
— Now you can enjoy your true
wireless Bluetooth Earbuds.
*Note: Once earbuds have been initially paired successfully with
your mobile device, they will automatically pair the next time
they are powered on.
Item No.: 32399
Charging Time: 1 hours
Playing Time: 3 hours
Capacity(Charging case): 240mAh / 3.7V (0.888Wh)
Capacity(Earbuds): 50mAh / 3.7V (0.185Wh)
Input: 5V/60mA (Earbuds)
Input: 5V/300mA (Charging case)
Function
Power On
Power Off
Play/Pause
Answer
Reject
Operation
Press (5) or (7) for 3 seconds or
remove the earbuds from
charging case
Press (5) or (7) for 5 seconds or
place the earbuds in the charging
case
Single press (5) or (7)
Single press (5) or (7)
Press (5) or (7) for 2 seconds
Earbuds
Power On
Link Mode
Two earbuds paired successfully
each other
LED indications (4) & (6)
Red and Blue LED will flash altemately
Flashing Blue + Red
One earbuds will flash red and blue,
another earbuds will turn off LED indicator.
ired Successfully
Pa
Power Off
Charging case
Charging
Fully Charged
Trun off
LED Off
Flashing red
Solid red
Back
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1)This device may not cause harmful interference(cid:15)
(2)This device must accept any interference received, including
interference that may cause undesired operation.
RF warning for Portable device:
The device has been evaluated to meet general RF exposure
requirment. The device can be used in portable exposure
condition without restriction.
Troubleshooting
Problem
Reason
Solution
One earbuds is working
but no sound in double
earbuds use
Two earbuds has not paired
successfully each other
before paired phone
Clear the connecting record of
device and follow the instruction
to repair again
No sound after
pairing
No indicator
during charging
Incorrect pairing
Try pairing process again
Earbuds positioned into
cradle incorrectly
Readjust earbuds in cradle
until indicator glows
Automatic shut down
Low battery
Charge earbuds and charging case
Noise, or interruption
Earbuds are too far away
from device
Move device closer to earbuds
Warning : Never store or use this product in temperatures below
32°F (0°C)or above 115°F (45°C)
FCC ID: 2ABHA0071
Made in China