Bluetooth Earbuds 4 3 1 2 1. Phone/music Button 2. Next/Previous song
(Volume Up+/Down-) Button 3. LED Indicator 4. Charging Port Whats included:
1 x Bluetooth Earbuds 1 x USB to Micro-USB charging cable 1 x Instruction Manual 1 x Box Technical Specifications:
- Model: CT172054
- Frequency response: 20Hz-20kHz
- Built-in 55mAh/3.7V lithium polymer battery
- Charging input: 5V/55mA It takes 2 hours to recharge from 0 to 100%. Playback at middle volume: up to 1 hour. LED Indicators:
- Solid Red: Earbuds are being charged
- Solid Blue: Charging completed ON/OFF
- Press and hold phone/music button 5 seconds Bluetooth Set Up:
During the connection process the Red and Blue LED will flash alternately. Search the possible Bluetooth connections from a Bluetooth enabled device. Select pairing name xxxxxx from list of available devices. Once selected, the Earbuds will announce, connected. Now you can play music. Phone/music Button Function:
- Short press phone/music button: Play/Pause,
- Short press +/- button: Next/Previous song
- Long press +/- button: valume up/down Phone Functions:
When a phone call comes in while the Earbuds are connected:
- Press and hold the Phone/music button to reject
- Press once to answer
- Press once to hang up when finishing the call
- Double press to redial the last Number called SAFETY PRECAUTIONS:
1. Please read all the instructions carefully before using the product. 2. The units full performance is achieved only after 2 or 3 completed charge and discharge cycles. 3. To reduce the risk of injury, close supervision is necessary when the product is used near children. 4. Do not expose the device to moisture. 5. Do not use the device if damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury. 6. Do not disassemble the device. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire . 7. Do not expose the device to fire or excessive temperatures. Exposure to fire or temperatures above 212F/100C may cause explosion. 8. Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Warning:
Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note:This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequence energy and,if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.However,there is no guarantee that interference will not accor in a particular if this equipmemt does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna. installation.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an autlet on a circuit different from that to which the receiver is connectec.
- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The devicecan be used in portable exposure condition without restriction. FCC ID:2ABHA0037