55mm TRUE WIRELESS EARBUDS WITH SPEAKER CASE 70mm GETTING STARTED 1 Type-C charging port 2 Speaker Case LED indicators 3 Left earbud LED indicator 4 Left control button 5 Right earbud LED indicator 6 Right control button 7 Left Mic 8 Right Mic 9 Speaker Case Power Button Left Earbud / Right Earbud Pause/Play/Answer Call/End Call L R 4 3 7 6 5 8 CHARGING YOUR EARBUDS MONO MODE
(SINGLE EARBUD USE) Remove earbud from charging case Once earbud is powered on, It will automatically proceed to PAIRING STEREO MODE
(DUAL EARBUD USE) Remove both earbuds from charging case and hold close each other Earbuds will automatically link together after a few seconds and you will hear an alert tone. One of the earbuds will ash red and blue, the other earbud will turn o LED indicator. Once Earbuds are linked together you may proceed to pairing with your mobile device. Note: If you attempt to pair before the earbuds have paired to each other, the earbuds will go into single earbud use. In this case, restart the process (Select forget device from your Bluetooth List). Once they are paired successfully, the indicator of one earbuds will turn o. QUICK START GUIDE FCC ID: 2ABHA0069 (Earbuds) FCC ID: 2ABHA0113 (Speaker case) 9 1 2 CHARGING YOUR CASE
--- Charge the speaker case, with the included Type-C -
cable for 2 hours. The LED indicator will light red during charging and turned o after fully charged Do not charge longer than suggested time. Do not charge overnight. Place Right and Left Earbuds in speaker case The earbud LED indicators (3, 5) will illuminate Red, indicating that the earbuds are charging properly. (Special note : if the Led indicator ashing blue and red , place it correctly until Led indicator lights become solid red). When Earbuds LEDs (3, 5) turns o, earbud batteries are fully charged. Front PAIRING TWS-i7 Enable Bluetooth search mode on your mobile device and search for pairing name True Wireless headset and select it on your mobile phone. Once the earbuds are successfully paired, a notication will sound . Now you can enjoy your true wireless Bluetooth Earbuds.
*Note: Once earbuds have been initially paired successfully with your mobile device, they will automatically pair the next time they are powered on. SPECIFICATION:
Earbuds:
Model: SL353 Item No.:2441 Capacity:35mAh/3.7V(0.1295Wh) Input:5V/60mA Speaker case:
Model: SL528 Item No.:25802 Capacity:1000mAh/3.7V(3.7Wh) Input:5V/700mA Function Earbuds Power On Power O Play/Pause Answer Reject Recall Earbuds Power On nk Mode Li Two earbuds paired successfully each other Paired Successfully Power O Charging Fully Charged Operation Press (4) or (6) for 3 seconds or remove the earbuds from charging case Press (4) or (6) for 5 seconds or place the earbuds in the charging case Single press (4) or (6) Single press (4) or (6) Press (4) or (6) for 2 seconds Double (4) or (6) LED indications (3) & (5) Red and Blue LED will ash altemately Flashing Blue + Red One earbuds will ash red and blue, another earbuds will turn o LED indicator. LED O LED O Flash Red LED o Back Speaker Power ON/OFF Play/Pause Long press the power button (9) Press once the power button (9) SPEAKER CASE OPERATION Long press the power button to turn on the speaker Enable Bluetooth search mode on your mobile device and search for pairing name 25802and select it on your mobile phone. Once the earbuds are successfully paired, a notication will sound .Now you can enjoy your speaker case.
*Note: Once speaker have been initially paired successfully with your mobile device,it will automatically pair the next time when it is power on. FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation. Warning: Any changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by
(ShenZhen C-Star Electronic Tech. Co., Ltd.) is under license. Other trademarks and trade names are those of their respective owners. Bluetooth Listing Declaration ID:D050169 Made in China