Lantern Speaker Instruction Manual SL332 Whats included:
1 x Speaker 1 x USB to Micro-USB Charging Cable 1 x Instruction Manual LED will flash blue slowly if it is successfully paired. Speaker will automatically pair if the mobile device has been paired before. Long press the Play/Pause/ON/OFF button (5) again to turn off the speaker. To reduce the risk of injury, close supervision is necessary when the product is used near children. Do not expose the device to moisture. Do not use the device in excess of its output rating. Overload outputs above 3. Model: SL332 Item No.: BC20789 Input: DC 5V/2A Battery capacity: 3.7V/3600 mAh Speaker output power: 3W Instructions:
(Be sure to fully charged the speaker before 1. Charging the Speaker Connect the provided charging cable to a power source and micro USB port on the speaker (1).The LED indicator will flash red when charging and turned into solid when fully charged. Playing Music:
Short press Play/Pause key to pause or Play music. Vol+/Next track:
Short press - next track. Long press - increase volume. Vol-/Previous track:
Short press - previous track Long press - reduce volume 4. Lantern:
Short press Lantern ON/OFF button sequentially to enable the High lightness Low lightness Flash Lantern off. Long press Lantern ON/OFF button to turn on the SOS function. 11. 12. 5. 6. 7. 9. 8. Do not use the device if damaged or explosion or risk of injury. Do not disassemble the device. For 10. professional. Incorrect reassembly may or temperatures above 113F may cause explosion. use only identical replacement parts to ensure product safety FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Functions:
1. Micro-USB charging port 2. Charging LED Indicator 3. Vol-/Previous Track 4. Lantern ON/OFF button 5. Play/Pause/ON/OFF 6. Vol +/Next Track 7. Bluetooth LED Indicator 8. Lantern 2. Pairing Setup:
Long press the Play/Pause/ON/OFF button (5), the Bluetooth LED Indicator (8) will flash blue. Turn on the Bluetooth function on mobile device, select BC20789 pairing name, the SAFETY PRECAUTIONS:
1. 2. 3. 4. WARNING-When using this product, basic precautions should always be followed:
Read all the instructions before use. Never store or use this product in temperatures below 32F(0C) or above 113F(45C). Do not overcharge Phone. Unit may get hot with excessive use. Remove Phone when it is fully charged. Never charge for more than 7 hours at a time. The units full performance is achieved only after 2 or 3 completed charge and discharge cycles. Front
(1)However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
(2)- Reorient or relocate the receiving antenna.
(3)- Increase the separation between the equipment and receiver.
(4)- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
(5)- Consult the dealer or an experienced radio/TV technician for help To assure continued compliance, any changes or modifications not expressly approved by the party.Responsible for compliance could void the users authority to operate this equipment. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. FCC ID : 2ABHA0101 MADE IN CHINA Back