Omni Outdoor Omni Outdoor Bluetooth Speaker Bluetooth Speaker Instruction Manual Instruction Manual SM-2927 SM-2927 Functions:
Functions:
1.Caribiner 1.Carabiner 2LED Indicator 2.LED Indicator 3Micro-USB input port 3.Type-C input port 4.ON/OFF Switch 4.ON/OFF Switch Whats included:
Whats included:
1 x IPX4 Water Resistant Speaker 1 x IPX4 Water Resistant Speaker 1 x USB to Micro-USB Charging Cable 1 x USB to Type-C Charging Cable 1 x Instruction Manual 1 x Instruction Manual 1 x Caribiner 1 x Carabiner Playing time: up to 1.5 hr at max volume Playing time: up to 1.5 hr at max volume Charging time: up to 1.5 hr Charging time: up to 1.5 hr Pairing Name: Omni Outdoor Pairing Name: Omni Outdoor Waterproof Rating : IPX4 Waterproof Rating : IPX4 105g Size165.1x88.9mm Instructions:
Instructions:
(Be sure to fully charge the speaker before
(Be sure to fully charge the speaker before 1. 1. 2. 2. Charging the Speaker Charging the Speaker Connect the provided charging cable to a Connect the provided charging cable to a power source and to the micro USB port on power source and to the Type-C port on the speaker (3). the speaker (3). The LED indicator light will glow red when The LED indicator light will glow red when charging and turn off when fully charged. charging and turn off when fully charged. Bluetooth Setup:
Bluetooth Setup:
Turn ON/OFF switch(4) to ON position, Turn ON/OFF switch(4) to ON position, 2 2 Turn on the Bluetooth function on mobile Turn on the Bluetooth function on mobile device, Select Omni Outdoor device, Select Omni Outdoor pairing name. pairing name. The LED(2) will turn solid Blue and a The LED(2) will turn solid Blue and a
successfully paired. successfully paired. Speaker will automatically pair if the mobile Speaker will automatically pair if the mobile device has been paired before. device has been paired before. Turn ON/OFF switch(4) to OFF position to Turn ON/OFF switch(4) to OFF position to turn off the device. turn off the device. If the bluetooth is disconnect the speaker If the bluetooth is disconnect the speaker will auto shut off after 5 mins. will auto shut off after 5 mins. SAFETY PRECAUTIONS:
WARNING-When using this product, basic precautions should always be followed:
Read all the instructions before use. Never store or use this product in temperatures below 32F(0C) or above 115F(45C). The units full performance is achieved only after 2 or 3 completed charge and discharge cycles. Keep out of reach of children. Do not use the device in excess of its output rating. Overload outputs above 1. 2. 3. 4. 5. SAFETY PRECAUTIONS:
6. WARNING-When using this product, basic Do not use the device if damaged or precautions should always be followed:
Read all the instructions before use. Never store or use this product in temperatures below 32F(0C) or above explosion or risk of injury. 115F(45C). Do not disassemble the device. For The units full performance is achieved only after 2 or 3 completed charge and professional. Incorrect reassembly may discharge cycles. Keep out of reach of children. Do not use the device in excess of its output rating. Overload outputs above or temperatures above 104F may cause explosion. Do not use the device if damaged or 1. 7. 2. 8. 3. 4. 9. 5. 6. 10. 7. use only identical replacement parts to ensure product safety explosion or risk of injury. Do not disassemble the device. For 8. FCC Statement:
professional. Incorrect reassembly may approved by the party responsible for compliance could void the users authority to 9. operate the equipment. This equipment has been tested and found or temperatures above 104F may cause to comply with the limits for a Class B digital explosion. device, pursuant to Part 15 of the FCC 10. Rules. These limits are designed to provide use only identical replacement parts to reasonable protection against harmful ensure product safety interference in a residential installation. This equipment general uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or FCC Statement:
television reception, which can be determined by turning the equipment off and on, the user approved by the party responsible for is encouraged to try to correct the interference compliance could void the users authority to by one or more of the following measures:
operate the equipment. Reorient or relocate the receiving antenna. This equipment has been tested and found Increase the separation between the to comply with the limits for a Class B digital equipment and receiver. device, pursuant to Part 15 of the FCC Connect the equipment into an outlet on a Rules. These limits are designed to provide circuit different from that to which the receiver reasonable protection against harmful is connected. interference in a residential installation. Consult the dealer or an experienced radio/TV This equipment general uses and can technician for help. radiate radio frequency energy and, if not This device complies with part 15 of the FCC installed and used in accordance with the rules. Operation is subject to the following instructions, may cause harmful interference two conditions (1) this device may not cause to radio communications. However, there is harmful interference, and (2)this device must no guarantee that interference will not occur accept any interference received, including in a particular installation. If this equipment interference that may cause undesired does cause harmful interference to radio or operation. television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. MADE IN CHINA MADE IN CHINA 20mm 31.2mm FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is Increase the separation between the equipment and receiver. connected. Consult the dealer or an experienced radio/TV technician for help. RF Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.