GETTING STARTED CHARGING YOUR EARBUDS MONO MODE
(SINGLE EARBUD USE) TRUE WIRELESS EARBUDS TART GUIDE QUICK S FCC ID: 2ABHA0059 1 Micro USB charging port 2 Charging Case LED indicators 3 Charging Case Power Button For checking power only) 4 Left earbud LED indicator 5 Left control button 6 Right earbud LED indicator 7 Right control button Left Earbud / Right Earbud Pause/Play/Answer Call/End Call R L 7 3 6 5 4 1 2 CHARGING YOUR CASE Charge the charging case, with the included micro USB cable for 2 hours. The LED indicator will be lit red during charging and turned o after fully charged Do not charge longer than suggested time. Do not charge overnight. Insulating trip Please remove the insulating trip before charging earbuds. Place Right and Left Earbuds in charging case Charging case LED indicator (2) will illuminate Blue and the earbud LED indicators (4, 6) will illuminate Red, indicating that the earbuds are charging properly. When Earbuds LEDs (4, 6) turns o, earbud batteries are fully charged. PAIRING OPERATING BLUETOOTH EARBUDS TWS-i7 Enable Bluetooth search mode on your mobile device and search for pairing name Tempo Earbuds and select it on your mobile phone. Once the earbuds are successfully paired, a notication will sound . Now you can enjoy your true wireless Bluetooth Earbuds.
*Note: Once earbuds have been initially paired successfully with your mobile device, they will automatically pair the next time they are powered on. Model: SL319 Item No.: XXXX Capacity(Cradle): 350mAh / 3.7V (1.295Wh) Capacity(Earbuds): 50mAh / 3.7V (0.185Wh) Input: 5V/60mA (Earbuds) Input: 5V/300mA (Cradle) Function Power On Power O Play/Pause Answer Reject Earbuds Power On Link Mode Paired Successfully Power O Earbuds in Cradle Charging Fully Charged Operation Press (5) or (7) for 3 seconds or remove the earbuds from charging case Press (5) or (7) for 3 seconds or place the earbuds in the charging case Single press (5) or (7) Single press (5) or (7) Press (5) or (7) for 2 seconds LED indications (4) & (6) Red and Blue LED will ash altemately Flashing Blue + Red Flashing Blue LED O Solid Red LED o Charging Case See CHARGING YOUR CASE FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation. Warning:
Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note:This equipment has been tested and found to comply with the limits for a class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequence energy and,if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.However,there is no guarantee that interference will not accor in a particular installation.if this equipmemt does cause harmful interference to radio or television reception,which can be determined by turning the equipment o and on,the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an autlet on a circuit dierent from that to which the receiver is connectec. Remove earbud from charging case Once earbud is powered on, It will automatically proceed to PAIRING STEREO MODE
(DUAL EARBUD USE) Remove both earbuds from charging case E and close each other arbuds will automatically link together after a few seconds, and earbuds will have a tone One earbuds will ash red and blue, another earbuds will ash blue only. Note: Please doule press the control button of one earbuds to make both earbuds pairing each other if they still not paired automatically after 20 seconds. Once Earbuds are linked together you may proceed to pairing with your mobile device. Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The devicecan be used in portable exposure condition without restriction Made in China