Metal Bluetooth Speaker and Wireless Charging Pad Instruction Manual 7198-64 Play/Pause/ON/OFF Bluetooth LED Indicator Vol +/Next Track Wireless Charging LED Indicator Vol-/Previous Track Micro-USB charging port Charging LED Indicator Wireless Charging Pad Functions:
1. 2. 3. 4. 5. 6. 7. 8. Whats included:
1 x Metal Speaker (7198-64) 1 x USB to Micro-USB Charging Cable 1 x Instruction Manual Playing time: up to 2hrs at max volume Charging time: up to 1.5hrs Pairing Name: Metal Wireless Instructions:
(Be sure to fully charge the speaker before 1. 2. 3. 4. Charging the Speaker Connect the provided charging cable to a power source and to the micro USB port on the speaker (6). The LED indicator light will glow red when charging and turn off when fully charged. Wireless Charging:
Connect speaker to a 2A output with the provided cable, Wireless Charging LED(4) will glow red once connected. Place wireless charging supported mobile device on top charging pad, LED will glow green when device is charging. Phone will begin to charge automatically. Bluetooth Setup:
Press and hold Power Button(1) to turn ON the speaker, Bluetooth LED Indicator(2) will Turn on the Bluetooth function on mobile device, Select Metal Wireless pairing name. LED will turn solid BLUE if successfully paired. Speaker will automatically pair if the mobile device has been paired before. Press and hold Power Button(1) to turn off the device. Playing Music:
Short press Play/Pause key to pause music. A second short press will resume playing music again. Vol+/Next track:
Short press - next track. Long press - increase volume. Vol-/Previous track:
Short press - previous track Long press - reduce volume SAFETY PRECAUTIONS:
WARNING-When using this product, basic precautions should always be followed:
Read all the instructions before use. Never store or use this product in temperatures below 32F(0C) or above 115F(45C). Do not overcharge Phone. Unit may get hot with excessive use. Remove Phone when it is fully charged. Never charge for more than 7 hours at a time. The units full performance is achieved only after 2 or 3 completed charge and discharge cycles. To reduce the risk of injury, close supervision is necessary when the product is used near children. Do not expose the device to moisture. Do not use the device in excess of its output rating. Overload outputs above 1. 2. 3. 4. 5. 6. 7. 8. Do not use the device if damaged or 9. explosion or risk of injury. Do not disassemble the device. For 10. professional. Incorrect reassembly may 11. 12. or temperatures above 104F may cause explosion. use only identical replacement parts to ensure product safety MADE IN CHINA FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference.
(2)This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note:This equipment has been tested and found to comply with the limits for a class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequence energy and,if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.However,there is no guarantee that interference will not accor in a particular installation.if this equipmemt does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an autlet on a circuit different from that to which the receiver is connectec. Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The devicecan be used in portable exposure condition without restriction.