FCC ID: 2BCGV0002 Wireless Power Bank

90mm UL Listed 10000 mAh Solar 15W Wireless Power Bank Model: SP0610 Item No.: 7122-12BK Type-C Input: 5Vdc / 2.4A, 9Vdc / 2A, 12Vdc / 1.5A Solar input: 5Vdc / 0.2A Type-C / USB output: 5Vdc / 2.4A, 9Vdc / 2A, 12Vdc / 1.5A Wireless Output: 5W/7.5W/10W/15W Battery/Cell Capacity: 37Wh, 3.7V/10000mAh Product Capacity (USB-A / Type-C): 28Wh,5Vdc / 5600mAh Operating temperature: 5~40C tor Charging 0~40C for Discharging Risk of Fire and Burns, dont open, crush, EN CAUTION:

disassemble and dispose of in fire. Accessible surfaces held or touched for short periods only. Dont heat above 45 C or Incinerate. Follow Manufacturers Instructions FR DANGER: risque dincendie et de brlures, ne pas ouvrir, dmonter, craser ni jeter au feu. Ne pas toucher ou tenir les surfaces accessibles sur une longue dure. MADE IN CHINA 55mm 7. Use of a power supply or charger not recommended or sold by power pack manufacturer may result in a risk of fire or injury to persons. 8. Do not use the power bank in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury to persons. 9. Do not use the power bank that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury. 10.Do not disassemble the power bank. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons. 11.Do not expose a power pack to fire or excessive temperature. Never store or use this product in temperatures below 32F (0C) or above 113F (45C). 12.Have servicing performed by a qualified repair person using only identical replacement parts.This will ensure that the safety of the product is maintained. 13.Do not charge the power bank while using the power bank to charge a device. Do not charge the power bank for more than 10 hours and do not leave unattended. 14.Disconnect the power bank when not in use. FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the 165mm 6 7 1 5 4 9 8 3 2 1. Power button 2. TYPE-C Input/output 3. Output( USB A-Type) 4. LED indicator(Wireless) 5. Wireless charging area 6. Carabiner 7. LED indicator (Solar) 8. LED indicator (advise of remaining charge number of illuminated lights decreases as power supply dwindles.) 9. Solar panel Button and Indicator Status Charging Fully charged Working Charging (Wireless) Charging (Solar) Power On Power Off How to use LED Indicator flash(White) lit(White) lit(White) lit(Blue) lit(Green) Press once Double press Type-C cable instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help. RF Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. IC STATEMENT

- English: "

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device."

- French:"

Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil nedoit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement."

This equipment complies with IC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. ce matriel est conforme aux limites d'exposition aux rayonnements rf de ic noncs dans un autre environnement. ce matriel doit tre install et exploit une distance minimale de 20 cm entre le radiateur et votre corps. "

1. Charging the portable Power bank a. Using your mobile phones USB adapter. Connect a USB cable to your phones USB adapter. Using the Type-C connector, connect the other end of the USB cable to the IN port on the portable Power bank. Plug the USB adapter into the outlet to begin charging. 2. Charging mobile phones and other electronic devices with USB output. a. Connect to USB cable to your mobile phone/device using the appropriate connector. Connect the other end of the USB cable to the OUT port of the portable Power bank. Your mobile phone/device should display the status of charging. b. Remove the USB cable from your mobile device when it is fully charged. 3. Charging mobile phones and other electronic devices with wireless output. To use the wireless charging mode the mobile device needs to be a Qi-enabled device. If necessary, enable wireless charging in the settings of your mobile device. Next simply stick your device to the charging area and the wireless charging will start. Note: In order to charge device use only accessory cable

(provided with power bank) or the cable included with your own device by the manufacturer. WARNING When using this product, basic precautions should always be followed, including the following:

1. Read all the instructions before using the product. 2. Power bank main unit contains an internal lithium ion battery. Upon initial use or after a prolonged storage period, fully charge it once. The units full performance is achieved only after 2 or 3 completed charge and discharge cycles. 3. Power banks are not allowed in checked luggage on commercial airline flights. Handle with care and dispose of in accordance to local regulations. Carry-on only. 4.To reduce the risk of injury, close supervision is necessary -

when the product is used near children. 5. Do not put ngers or hands into the product. 6. Do not expose power bank to rain or snow. carrosserie. CAN ICES-3 (B) / NMB-3 (B) This Class B digital apparatus complies with Canadian ICES-003.

(Cet appareil numrique de la Classe B conforme la norme NMB-003 du Canada). FCC ID: 2BCGV0002 IC: 31955-00001 HVIN: 001 SAVE THESE INSTRUCTIONS

33mm 44mm UL Listed 10000 mAh IPX5 Solar 15W Wireless Power Bank Model: SP0610 Item No.: 7122-12BK Type-C Input: 5Vdc/2.4A, 9Vdc/2A, 12Vdc/1.5A Solar Input: 5Vdc/ 0.2A Type-C/USB-A Output: 5Vdc/2.4A, 9Vdc/2A12Vdc/1.5A Wireless Output: 5W/7.5W/10W/15W Battery/Cell Capacity: 37Wh, 3.7V/10000mAh Product Capacity (USB-A / Type-C): 28Wh,5Vdc/5600mAh S/N: 24-03-2048719 HVIN: 001 UL 2056 certified CAUTION: Risk of Fire and Burns MADE IN CHINA FCC ID:2BCGV0002 IC: 31955-00001 12mm Indicator light

(NINGBO CSTAR IMPRINT E-COMMERCE CO.,LTD) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03-26-2024 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: (2BCGV0002)

[NINGBO CSTAR IMPRINT E-COMMERCE CO.,LTD] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely,

(Applicant signature)

(Foster Li) Rev 1/26/2023

(NINGBO CSTAR IMPRINT E-COMMERCE CO.,LTD) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03-26-2024 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: (2BCGV0002)

[NINGBO CSTAR IMPRINT E-COMMERCE CO.,LTD] (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Sincerely,

(Applicant signature)

(Foster Li) Rev 1/26/2023

Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2BCGV0002 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Block Diagram Schematics Operational Description File Name Block Diagram Schematics Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commissions public notice, We also requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after the Grant Date of Equipment Authorizations. Exhibit Type File Name Sincerely, Foster Li 2024.03.26 Rev 11/20/07

Declaration on model difference We the undersigned hereby confirm that these models are identical, and all models have the same RF module, PCB layout , Antenna, schematics and component. Only different on model name. Production name Wireless Power Bank Trademark N/A FCC 2BCGV0002 Model no. SP0610, 7122-12 Confirmed by:

Foster Li NINGBO CSTAR IMPRINT E-COMMERCE CO.,LTD 2024.03.26

NINGBO CSTAR IMPRINT E-COMMERCE CO.,LTD Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: 2024-03-26 SUBJECT: FCC ID: 2BCGV0002 To Whom It May Concern:

I, the undersigned, hereby states this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules, and will apply the Supplier's Declaration of Conformity procedure to the class B computer peripheral portion of this composite device. I understand the following FCC requirements:

1. Devices subject to the SDoC procedure are required to be tested to show compliance with the FCC technical regulations by a recognized accredited testing laboratory. The testing laboratory must be accredited by a Commission approved accreditation body or designated under the terms of a government-to-government Mutual Recognition Agreement (MRA). A listing of those accredited testing laboratories that have been recognized by the Commission is published on the FCC Webpage: https://apps.fcc.gov/oetcf/eas/reports/TestFirmSearch.cfm (Select the

"accredited" option to search for FCC recognized accredited test firms.) 2. Pt 2.1077 contains the list of information that must be included in the Supplier's Declaration of Conformity, which must be supplied with each product sold. The SDoC compliance info shall be included in the Users Manual or as a separate sheet. The info must contain the name, address, and phone number of the responsible party, which must be located within the United States. According to 2.909(b), the responsible party is either the Manufacturer or if the product is imported the Importer. Regards, NINGBO CSTAR IMPRINT E-COMMERCE CO.,LTD

Foster Li

NINGBO CSTAR IMPRINT E-COMMERCE CO.,LTD Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date:2024-03-26 SUBJECT: FCC Application for (FCC ID: 2BCGV0002) To Whom It May Concern:

We, the undersigned, hereby authorize Sam Lv at EMTEK (DONGGUAN) CO., LTD. on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by EMTEK (DONGGUAN) CO., LTD. on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Sincerely, Foster Li 2024.03.26

NINGBO CSTAR IMPRINT E-COMMERCE CO., LTD. Section 2.911(d)(7) USA Agent for Service of Process Company name: NINGBO CSTAR IMPRINT E-COMMERCE CO., LTD. Address: B46, BUILDING B, INDUSTRIAL BLOCK, QIAOTOUHU STREET, NINGHAI COUNTY, NINGBO CITY, ZHEJIANG PROVINCE, CHINA GC: 2BCGV

: 0034122457 FRN 2.911(d)(7) USA Designated Agent for Service of Process We, [NINGBO CSTAR IMPRINT E-COMMERCE CO., LTD.] (the applicant) designate [PROSTOCK LLC] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: PROSTOCK LLC Address: 10 Pines Lake Drive East Wayne, NJ.07470, USA FRN0033411935 Contact Name: Marc Puglisi Telephone No: 973-865-8262 Email: marcp@prostockus.com Signature:

Title: General Manager Applicant Company name: NINGBO CSTAR IMPRINT E-COMMERCE CO., LTD. Address: B46, BUILDING B, INDUSTRIAL BLOCK, QIAOTOUHU STREET, NINGHAI COUNTY, NINGBO CITY, ZHEJIANG PROVINCE, CHINA Contact Name: Foster Li Telephone No: +86-755-29063393 Email: FoLi@szcstar.cn Signature:

Title: Compliance Manager 2.911 (d)(7)USA Agent v1.2 Date: Sep 13, 2023 Date: Sep 13, 2023 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the 2.911 (d)(7)USA Agent v1.2