FCC ID: 2BCGV0004 Wireless Power Bank

UL Listed Connect 5000 mAh Wireless Power Bank Instruction Manual 7122-11 Model #: SP0611 6 4 5 USB-A Output Port Wireless Charging LED Indicator LED Indicators Type-C Input Port ON/OFF Button Wireless Charging Surface Functions:

1. 2. 3. 4. 5. 6. Whats included:

1 x Wireless Power Bank 1 x Charging Cable 1 x Instruction Manual Type-C Input/output: 5Vdc / 2A USB-A Output: 5Vdc / 2.1A Wireless Output: 5W Battery/Cell Capacity: 18.5Wh, 3.7V / 5000mAh Product Capacity(USB-A/Type-C):

XXWh, 5Vdc / XXXXmAh Operating temperature: 5~40C tor Charging 0~40C for Discharging Product Name: Power Bank Instructions:

1. Charging the Powerbank:

Be sure the power bank is fully charged before usage. The LED Indicators(3) display the battery capacity of the powerbank. Using the included Type-C to USB-A charging cable, insert the USB-A tip of the USB-A port of a computer and the Type-C tip into Type-C Input(4). Once connected, the LED indicator(3) will Once fully charged the LED indicator will charging cable from the power bank. Charging Mobile Phones and Other Electronic Devices:

Connect the charging cable to your mobile phone/device using the appropriate connector and connect the USB-A tip of the cable into either USB-A Output(1). This device will begin to charge automatically, the LED indicators(3) will glow. Remove the charging cable from your device when it is fully charged. Power bank can be turned OFF by double pressing the ON/OFF button(5). Wireless Charging Mobile phones and other electronic devices:

Press the ON/OFF button to turn ON the powerbank. Place the wireless charging supported mobile device on the wireless charging surface(6), LED indicator(2) will glow GREEN when device is charging. Phone will begin to charge automatically. Once fully charged remove the device. 2. 3. Note: When wireless charging, if the LED a wireless charging device or there is an object between the device and charging surface interfering with the charging. process. SAFETY PRECAUTIONS:

WARNING-When using this product, basic precautions should always be followed:

Read all the instructions before use. Never store or use this product in temperatures below 32F(0C) or above 113F(45C). Do not overcharge your phone. The unit may become hot under excessive use. Remove your phone once it is fully charged. Never charge your phone for more than 7 hours at a time. To reduce the risk of injury, close supervision is required when the product is used near children. Do not expose the device to moisture. Do not use the device in excess of its output rating. Overload outputs above the Do not use the device if damaged or explosion or risk of injury. Do not disassemble the device. For professional. incorrect reassembly may 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. or temperatures above 104F may cause explosion. To ensure product safety, ensure that identical replacement parts. Attachments on the back of your phone 11. 12. can impede the effectiveness of the wireless charger, and lead to overheating. You must remove attachments from the phone before charging on this device.

:tnemetatS CCF This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. Warning:

(1)

(2)

1. 2. 1. 2. approved by the party responsible for compliance could void the users authority to operate the equipment. Note :

This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/

TV technician for help. tnemetatS erusopxE noitaidaR CCF The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. IC Statement :

This device contains licence-exempt transmitter (s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference. This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:

L appareil ne doit pas produire de brouillage;

L appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d en compromettre le fonctionnement. Radio Frequency Exposure Statement for IC This equipment complies with IC exposure limits set forth for an uncontrolled environment. le dispositif a t valu satisfaire l'exigence gnrale de l'exposition aux rf. l'appareil peut tre utilis dans des conditions d'exposition portatif sans restriction. carrosserie. CAN ICES-3 (B) / NMB-3 (B) This Class B digital apparatus complies with Canadian ICES-003.

(Cet appareil numrique de la Classe B conforme la norme NMB-003 du Canada). CAUTION: Risk of Fire and Burns, dont open, crush, EN Accessible surfaces held or touched for short periods only. Dont heat above 45 C or Incinerate. Follow Manufacturers Instructions FR DANGER: risque dincendie et de brlures, ne pas ouvrir, dmonter, craser ni jeter au feu. Ne pas toucher Name of the Distributor:

Leedsworld Inc Address of the Distributor:

400 Hunt Valley Road, New Kensington, PA 15068 USA. WWW.PCNA.COM Made in China FCC ID: 2BCGV0004 IC: 31955-00002 HVIN: 002 Paper from responsible sources C170910

ON/OFF Button 29mm Type-C Input/output: 5Vdc / 2A USB-A output: 5Vdc / 2.1A B-A/Type-C) 5Vdc / XXXmAh 002 2BCGV0004 31955-00002 42mm 15mm

(NINGBO CSTAR IMPRINT E-COMMERCE CO.,LTD) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03-21-2024 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: (2BCGV0004)

[NINGBO CSTAR IMPRINT E-COMMERCE CO.,LTD] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely,

(Applicant signature)

(Foster Li) Rev 1/26/2023

(NINGBO CSTAR IMPRINT E-COMMERCE CO.,LTD) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03-21-2024 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: (2BCGV0004)

[NINGBO CSTAR IMPRINT E-COMMERCE CO.,LTD] (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Sincerely,

(Applicant signature)

(Foster Li) Rev 1/26/2023

Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2BCGV0004 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Block Diagram Schematics Operational Description File Name Block Diagram Schematics Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commissions public notice, We also requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after the Grant Date of Equipment Authorizations. Exhibit Type File Name Sincerely, Foster Li 2024.03.21 Rev 11/20/07

Declaration on model difference We the undersigned hereby confirm that these models are identical, and all models have the same RF module, PCB layout , Antenna, schematics and component. Only different on model name. Production name Wireless Power Bank Trademark N/A FCC 2BCGV0004 Model no. SP0611, 7122-11 Confirmed by:

Foster Li NINGBO CSTAR IMPRINT E-COMMERCE CO.,LTD 2024.03.21

NINGBO CSTAR IMPRINT E-COMMERCE CO.,LTD Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date:2024-03-21 SUBJECT: FCC Application for (FCC ID: 2BCGV0004) To Whom It May Concern:

We, the undersigned, hereby authorize Sam Lv at EMTEK (DONGGUAN) CO., LTD. on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by EMTEK (DONGGUAN) CO., LTD. on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Sincerely, Foster Li 2024.03.21

NINGBO CSTAR IMPRINT E-COMMERCE CO., LTD. Section 2.911(d)(7) USA Agent for Service of Process Company name: NINGBO CSTAR IMPRINT E-COMMERCE CO., LTD. Address: B46, BUILDING B, INDUSTRIAL BLOCK, QIAQTOUHU STREET, NINGHAI COUNTY, NINGBO CITY, ZHEJIANG PROVINCE, CHINA GC: 2BCGV FRN: 0034122457 2.911(d)(7) USA Designated Agent for Service of Process We, [NINGBO CSTAR IMPRINT E-COMMERCE CO., LTD.] (the applicant) designate [PROSTOCK LLC] '' for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Applicant Company name: PROSTOCK LLC Company name: NINGBO CSTAR Address: 10 Pines Lake Drive East Wayne, IMPRINT E-COMMERCE CO., LTD. NJ.07470, USA Address: B46, BUILDING B, INDUSTRIAL FRN: 0033411935 BLOCK, QIAOTOUHU STREET, NINGHAI COUNTY, NINGBO CITY, Contact Name: Marc Puglisi ZHEJIANG PROVINCE, CHINA Telephone No: 973-865-8262 Email: marcpo@prostockus.com Contact Name: Foster Li Telephone No: +86-755-29063393 Email: FoLi@szcstar.cn Signature: Mare Puslist Spout Title: General Manager Signature:

Title: Compliance Manager 2.911 (d)(7)USA Agent v1.2 Date: Sep 13, 2023 Date: Sep 13, 2023 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/ protecting-aqgainst-nation al-security-threats-to-the-communications-supply-chain-through-the 2.911 (d)(7)USA Agent v1.2