Important Safety Guidelines
Outdoor WIFI Smart Plug
Outdoor WIFI Smart Plug
Outdoor WIFI Smart Plug
WHAT'S IN THE BOX
Please consult this checklist for all parts.
CONNECT
Download
Link2Home Pro is available for both iOS and Android OS. Search the
name 'Link2Home Pro'in the App Store or Android Market, or scan the
QR code below to download the App.
Registration process
Step 1 Open the Link2Home Pro App, click "Register", read the "Privacy
Policy" and click "Agree" .
Outdoor WIFI Smart Plug
2 Grounded Outlets
·Support
Outdoor WIFI Smart Plug
ADD A DEVICE MANUALLY
Getting started
1. Please follow the instructions and make sure the passwords are input
correctly.
2. One device can only be added with one App account, if the device
has been added with another account already, then it can't be
added to any other account again. Devices can be shared with other
users in the Home Management settings.
3. If the device has been added to another account it will need to be
removed first. After the device has been removed it will reset
automatically and the status light will change from solid blue to
flashing red.
Process
Step 1 Open the Link2Home Pro App, click "+" (in the upper right hand
corner of the screen) or "Add Device". Then select "Add
Manually".
Smart Plug
Instructions
WARNING:
1. For safety, always switch off your appliances before connecting.
2. For indoor use only.
3. Whenever you change a Wi-Fi network, reconnection is required.
4. Do not plug in and out the device continually. Always wait for an
interval of 10 seconds.
DESCRIPTION
Status light
Blinking light: awaiting WiFi connection
Led light on: device is on
Reset
Press and hold the reset button for 5
seconds to restore to factory defaults.
Dowoload App(IOS&android)
Set up router
This device supports 2.4GHz frequency's only. It does not support 5GHz.
Most household routers are dual band and so you should not need to
change your routers settings. If however you do not have a dual band
router please select an appropriate 2.4GHz network before WiFi
configuration. When you set up your device ensure your mobile device,
router and Link2Home device are as close as possible. You can move
the device after set up.
Step 2
Input a valid email address and click continue. Then enter the
verification code from your email back into the App.
(check you junk folder).
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols and
words to alert you to hazardous situations and your risk of personal
injury or property damage.
DANGER: Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
(Used without word) Indicates a safety related message.
NOTICE: Indicates a practice not related to personal injury which,
if not avoided, may result in property damage.
WARNING: PLEASE READ THIS INSTRUCTION MANUAL
THOROUGHLY AND COMPLETELY BEFORE INSTALLATION &
USE. FAILURE TO DO SO COULD CAUSE DAMAGE TO
PROPERTY, SERIOUS INJURY OR DEATH, AND VOID YOUR
WARRANTY.
WARNING:CancerandReproductiveHarm-
www.P65Warnings.ca.gov.
AVERTISSEMENT: Cancer et Troubles de l'appareil reproducteur -
www.P65Warnings.ca.gov.
ADVERTENCIA:CánceryDañoReproductivo-
www.P65Warnings.ca.gov.
For California residents / Pour les résidents de la Californie / Para residentes en California
01
02
03
04
05
Please keep
network available
Step 2 Select "Electrician". Power the device on and make sure the
blue indicator is flashing quickly.If you do not blue see a
flashing blue light press and hold the reset button for 5
seconds.
Outdoor WIFI Smart Plug
Outdoor WIFI Smart Plug
Outdoor WIFI Smart Plug
Outdoor WIFI Smart Plug
Outdoor WIFI Smart Plug
Outdoor WIFI Smart Plug
Step 4 The device is added, and the device nickname can also be
FUNCTIONS
changed in this interface.
1. Control you devices from anywhere using your phone with the Smart
Plug. You can turn devices on/off, check status, create schedules and
set timers using the Link2Home Pro App.
2. Add voice control to any plugged device by pairing with Amazon
Alexa and Google Assistant.
3. Manually turn your plug on or off using the switch.
4. Set up a Timer.
a) On the individual device screen
b) Tap the Timer button or Countdown button to set a timer/
countdown for the plug
5. Set up a Smart Setting.
Smart settings allow you to group devices together and set up
various triggers such as time of day, location and be trigged by other
devices.
a) Tap Smart button on the first page to enter Smart scene page
b) Tap "+" on the top right to enter setting page
c) You can set your personal routine scene control here
Specifications
125V~60Hz, 15A, 1/2HP, 1875W(Resistive), 1250W(Tungsten)
Frequency: 2.4GHz (meets the requirements of
IEEE802.11/b/g/n standard)
GROUNDING INSTRUCTIONS
In the event of malfunction or breakdown, grounding provides a path of
least resistance for electric current to reduce the risk of electric shock.
The plug must be connected to a cord having an equipment-grounding
conductor and a grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance
with all local codes and ordinances.
DANGER:
Improper connection of the equipment grounding
conductor can result in a risk of electric shock. The conductor with
insulation having an outer surface that is green with or without yellow
stripes is the equipment grounding conductor. If repair or replacement
of the cord or plug is necessary, do not connect the equipment-ground-
ing conductor to a live terminal. Check with a qualified electrician or
service person if the grounding instructions are not completely
understood, or if in doubt as to whether the plug is properly grounded.
Do not modify the plug connected to the plug – if it will not fit the
outlet, have a proper outlet installed by a qualified electrician.
FOR GROUNDED, CORD-CONNECTED PLUG RATED LESS THAN 15A
AND INTENDED FOR USE ON A NOMINAL 125V SUPPLY CIRCUIT
The plug is for use on a nominal 125V circuit, and should be connected
to a grounding outlet that looks like that illustrated in sketch a. A
temporary adaptor, which looks like the adaptor illustrated in sketch b,
may be used to connect this plug to a 2-pole receptacle as shown in
sketch b if a properly grounded outlet is not available. The temporary
adaptor should be used only until a properly grounded outlet can be
installed by a qualified electrician. The green colored rigid ear, lug, and
the like, extending from the adaptor must be connected to a permanent
ground such as a properly grounded outlet box cover. Whenever the
adaptor is used, it must be held in place by the metal screw.
brouillageradioélectriquesubi, mêmesi le brouillageest susceptible
d'encompromettre le fonctionnement.
This Class B digital apparatus complies with Canadian ICES-003.
Cetappareilnumérique de la classe B estconformeà lanorme NMB-003
du Canada.
Les communications effectuées au moyen de cetappareil ne sont pas
nécessairement protégées des indiscrétions.
The equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment.The equipment should be installed
and operated with minimum distance 20cm between the radiator and
your body.
Déclarationd'exposition aux radiations:
Cetéquipementestconforme aux limitesd'exposition aux rayonnements
ISEDCanada établies pour unenvironnementnon contrôlé.
Cetéquipementdoitêtreinstalléetutilisé avec un minimum de20cm de
distance entre la source de rayonnement et votre corps.
MANUFACTURER
Ningbo EverFlourish Smart Technology Corp. Ltd.
Address: 77 Wuxiang East Road, Yinzhou, Ningbo, 315111, P.R.China
FCC CAUTION
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment.
The equipment should be installed and operated with minimum
distance 20cm between the radiator and your body.
ISED WARNING:
This device complies with Innovation, Science and Economic
Development Canada
licence-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may
cause undesired operation of the device.
Le présentappareilestconforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitationestau-
torisée aux deux conditions suivantes : (1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout
10
Choose the Auto Scan
Feature from the add
device screen
The Auto Scan feature will scan your local
network for searching devices. Ensure the device
is in scan mode (Step 2) and ensure you have the
correct Wi-Fi network selected. You can change
the Wi-Fi network by clicking Modify Wi-Fi
config. When the device or devices are found
you will see them on your screen. Then complete
the set up from Step 4.
07
06
NOTE: IN CANADA, THE USE OF A TEMPORARY ADAPTOR IS NOT
PERMITTED BY THE CANADIAN ELECTRICAL CODE. Ensure that the
timer is connected to an outlet having the same configuration as the
plug.
09
08
Step 3 Your device WiFi network will be the default network
displayed. Simply add your WiFi password or choose another
network. After confirming your password hit confirm and your
device will connect.
USE THE AUTO SCAN FEATURE TO ADD A PRODUCT
Instruction manual
ITEM N°: 30UL/WFO
4
Select your device type.
In this case Socket (Wi-Fi)