Instruction Manual Remote control Item no. Transmitter RF101T1L A. Functions 1. Learning code system 2. Manual button on each receiver for ON/OFFcontrol. B. Diagram 1 No. Description Function 1 ON OFF Switch ON/OFF the paired receiver C. Instruction 1. Pairing a) Plug the receiver into an outlet, the LED indicator flashes (under pairing mode), press the ON or OFF button on the transmitter. If the LED is not under pairing mode, press the manual button over 3 seconds to turn the receiver into pairing mode. b) LED stop flashing, pairing success. c) Pairing mode can last for 15 seconds, if no operation on transmitter after 15 seconds, the receiver will exist the pairing mode, LED stops flashing. 2. Control a) Press ON/OFF button on the transmitter to switch the related channel's receiver ON/OFF D. Caution 1. Do follow product parameter for functionally use 2. Product is non-waterproof, require using in dry environment 3. When the battery of transmitter is in low voltage, it influences product transmitting distance E. Specification Receiver battery: 125VAC, 60Hz Transmitter battery: CR2032L DC3V Frequency: 433.92 MHz Distance: Up to 30 meters in open area FCC CAUTION:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IC WARNING:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitationestautorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout brouillageradiolectriquesubi, mmesi le brouillageest susceptible d'encompromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES-003. Cetappareilnumrique de la classe B estconforme la norme NMB-003 du Canada. Les communications effectues au moyen de cetappareil ne sont pas ncessairement protges des indiscrtions. the device is compliance with RF exposure guidelines, user can obtain Canadian information on RF exposure and compliance. Le prsentappareilestconforme Aprs examen de ce materiel aux conformitou aux limitesd'intensit de champ RF, Les utilisateurspeuventsurl'exposition aux radiofrquenceset la conformit and compliance d'acqurir. Manufacturer :
Manufacturer: Ningbo EverFlourish Smart Technology Corp. Ltd. Adress: 77 Wuxiang East Road, Yinzhou, Ningbo, 315111, P.R.China