Instruction Manual for WI-FI Smart Socket
(APP: Jasco myTouchSmart APP ) Type: 26UL-WF(Indoor) A. Function 1. The myTouchSmart APP Wi-Fi plug connects your home Wi-Fi network to your appliances for easy control of home automation, energy saving and home security. 2. App controls any connected electrical appliances via your smart device. Wherever and whenever you choose to control the on/off, timer setting and group setting. Applicable for both IOS and Android system. 3. By refreshing the screen, you can see your plugs on/off status from the APP. 4. With push button, control power on/off manually. 5. Timer setting function via the APP is easy and convenient. 6. Available to add multiple Wi-Fi plugs to suit your need. Manual power on/off with Outlet socket light indicator B. Connection 1. Download myTouchSmart from APP store or Google Play on your smart phone, open the APP and follow the procedure to register your account with a valid email address. 2. Add new device to your smart phone by following the procedure demonstrated in the APP. 3. Once connected, you can either control the appliances via your smart phone or manually. C. Setting Procedures 1. Find New Device a) After downloading the APP and register your account, plug in the device to a main plug, myTS LED flashes quickly continuously (few times per second). b) Click Find New Device. Then, enter the Wi-Fi password if it is the first time to add the device. c) After searching, choose the device found, then click button connect to add the device to your smart phone. d) Click on home page to refresh the device status. 2. Edit Device a) Click the pen icon
, then enter into Edit device page. b) Change picture and device name. c) View firmware version and MAC. 3. My programs Setting a) Click My programs button, then + Add program to add new program. b) Click on the block with the Device ON / Device OFF to set your time. c) Choose to repeat in weekly or only once. d) Press Save to activate. e) Repeat the same schedule to add more time settings. 4. Morning Setting a) Click Morning button. b) Click on the block with the Device ON / Device OFF to set your morning time. c) Choose to repeat in which days. d) Press Save to activate. 5. Evening setting a) Click Evening button. b) Click on the block with the Device ON / Device OFF to set your evening time. c) Choose to repeat in which days. d) Press Save to activate. 6. Countdown setting a) Click Countdown button. b) Scroll up and down to choose hour and minute to countdown. c) Press Start to activate. 7. All programs setting a) Click All programs button to review all timers. b) Slide to activate/deactivate morning program, evening program and my programs. c) Click Delete to delete timer. 8. Group Setting Group Setting allows you to combine different devices into the same on/off timer. Ideal for special occasion on/off control (eg. Going out for a holiday). a) Go to GROUP icon on the first page. b) Click Add New Group, choose icon for the group. c) Click the pen icon
, then enter into Edit group page to change picture and group name. d) Group program setting of my programs, Morning, Evening and Countdown is the same as device program setting. e) Click Change device on Programs page to replace the device in the group. Group setting notes:
a) There must be above 2 devices added in the App. b) Clink the bulb icon to control the devices on/off at the same time in one group. 9. Reset a) Press and hold the manual button on the device for 10 seconds, the device will be deleted automatically, then the device is free for any other new account to add. b) To change user account to control the devise, click the pen icon of each device to delete device, then the device is open for any other new account to add. MyTS LED Description Flashes slowly
- Smart plug is searching for the Wi-Fi network.
(once per
- Press and hold the button for 3 seconds until the LED flashes quickly second)
(few times per second), device enter into the connection mode.
- Follow the procedure on the APP to activate the new device and enter Flashes quickly
- Device is in connection Mode. the Wi-Fi password for connection.
(few times per
- Follow the instruction Find New Device and enter the Wi-Fi password second) for connection.
- When adding device successfully, the LED will stay ON or OFF, without On or OFF
- Power on /off status indicator. flashing.
- Connection successful (after connection mode as above). D.FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The distance between user and products should be no less than 20cm IC WARNING This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. The distance between user and products should be no less than 20cm Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. la distance entre l'utilisateur et les produits devraient tre au moins 20 cm Cautions:
1. For safety, always switch off your appliances before connecting. 2. For indoor use only. 3. Whenever you change a Wi-Fi network, reconnection is required. 4. Do not plug in and out the device continually. Always wait for an interval of 10 seconds. Attention:
1. Pour votre scurit, teignez toujours vos appareils avant de les connecter. 2. Pour usage intrieur seulement. 3. Chaque fois que vous changez un rseau Wi-Fi, la reconnexion est ncessaire. 4. Ne pas brancher et dbrancher l'appareil en permanence. Toujours attendre un intervalle de 10 secondes Specifications 1. 125V~ 60Hz, 15A Resistive, 1/2HP 2. 1875W, 15A (Resistive), 1250W, 10A (Tungsten) 3. Frequency: 2.4GHz (meets the requirements of IEEE802.11/b/g/n standard) 4. Compatible Platforms: Google Home (assistant) , Amazon Echo 5. UL, FCC/IC certified 6. For indoor use only 7. Operation temperature: 0~40. System Requirements 1. Wi-Fi router 2. iOS 10.0 and higher 3. Android 6.0 or later