PPHP1241WMU Wireless & Portable Loudspeaker Active PA Speaker System Kit, Built-in Rechargeable Battery (12" Subwoofer, 1000 Watt) INDEX Operation .................................................................................................................. 2 Users General Instructions ....................................................................................... 3 Controls and Connections ................................................................................... 4 Specifications ............................................................................................................ 6 CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER [OR BACK]
THIS PRODUCT MUST BE EARTHED NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL OPERATION 1. Prior to switching ON, turn volume down to minimum. 2. Connect the audio source to the appropriate input socket. 3. Connect to the mains supply. 4. Switch ON the audio source followed by the active speaker. 5. Set the volume with the applicable control. 6. Adjust the bass + treble. 7. When using the speaker using the built-in battery, if you find the MP3 screen flickering which indicates the battery voltage is low, turn OFF the speaker box and charge battery. 8. If you don't use the unit frequently, please do remember to charge the unit every three months to keep the battery in good condition. Note: Please turn OFF the product when fully charged. www.PyleUSA.com 2 INSTRUCTIONS Do not overload the box to avoid damage to the speakers. Do not place to an open fire (candles etc) on top or next to the box- FIRE HAZARD Only connect to an earthed mains outlet of 110Vac/60Hz. For indoor use only. If the box will be used outdoors, you need to make sure that no humidity can enter the box. When not in use, unplug the unit from the mains. Unplug the unit from the mains prior to checking or replacing the fuse. Make sure that the box is placed on a stable, strong surface. The boxes can be hung. Use only strong and approved mounting material. During the mounting, make sure that nobody is standing below the mounting area. Do not place liquids on the box and protect it against humidity. Humidity can shorten the life time considerably. Only use suitable means of transportation if you want to move the box -
USE EXTRA CAUTION HANDLING THE BACK PANEL. Always unplug the unit during a thunderstorm or when it is not in use. If the unit has not been used for a long period of time, condensation can occur inside the housing. Please let the unit reach room temperature prior to use. Never try to repair the unit yourself. It does not contain any user serviceable parts. Run the mains lead in such a way that nobody can fall over it and nothing can be put in it Set the unit to the lowest volume prior to switching it on. Keep the unit out of the reach of children. 3 www.PyleUSA.com 22. Chanel A wireless Mic power LED 23. Wireless microphone antenna 24. Wireless microphone select:
Press it to power ON/OFF the wireless microphone 25. ON/OFF Power switch 26. Battery charge switch 27. External Power DC 12V Input 28. AC Power: Connect the incorporated AC power cord 29. Batterry Electric quantity Instructions Change Low electronic- full electronic CONTROLS AND CONNECTIONS 1. LED Screen 2. Mp3 control 3. SD Card Slot 4. USB PORT 5. Bass Control 6. Treble Control 7. ECHO EFFECT FOR MICROPHONE 8. Mic Level: It is used to adjust the signal level from the microphone input 9. Master Volume: It is used to adjust the signal level from the Mp3/Line input 10. Mp3 Level: It is used to adjust the signal level from the Mp3 11. Guitar Level: It is used to adjust the signal level from the Guitar input 12. Mic input: 6.35mm Jack for a microphone input 13. RCA Line input 14. Microphone Select: Press it to power ON/OFF the wire microphone 15. 3.5mm AUX input 16. RCA line output 17. 6.35mm Guitar input 18. B-VOL: It is used to adjust the signal level of B wireless microphone 19. Wireless Mic power LED 20. Chanel B wireless Mic power LED 21. A-VOL: It is used to adjust the signal level of A wireless microhpne www.PyleUSA.com 4 CONTROLS AND CONNECTIONS 5 www.PyleUSA.com PPHP1241WMU Wireless & Portable Loudspeaker Active PA Speaker System Kit, Built-in Rechargeable Battery
(12" Subwoofer, 1000 Watt) Features:
Versatile High-Powered Mobile Cabinet Speaker System Rugged, Durable & Reliable Sound Speaker System: 12'' Woofer, 1'' Tweeter Compression Driver with Titanium Diaphragm Built-in Rechargeable Battery 2-Way Full Range Audio Projection Built-in Digital Audio Amplifier RCA (L/R) Stereo Line Input Connectors RCA (L/R) Stereo Line Output Connectors Connect & Stream Audio from External Devices USB Flash Drive & SD Memory Card Readers USB Reader Doubles as Device Charging Port FM Radio with Digital LCD Display ID3 Tag Song Readout Info: LCD Displays Song Title/Song Artist Rear Panel Rotary Dial & Button Control Center Master Volume, Mic Volume, Echo, Treble, Bass Setting
(2) 1/4'' Microphone Inputs Convenient Carry Handles 35mm Speaker Stand Mount Engineered Heavy Duty ABS Housing www.PyleUSA.com 6 What's in the Box:
PA Speaker Wireless Handheld Microphone frequencyVHF 212MHz Modulation modeBroadband FM Frequency interval300KHz Frequency stability0.005%
Dynamic range100dB Maximum modulation45KHz Audio frequency response80Hz~18KHz3dB Integrated signal to noise ratio105dB Composite distortion0.5%
Working environment temperature0~40 Maximum output level10dBV Transmitter indicator Antenna Handheld, microphone builtin spiral antenna Output power High power 1mWow power 3mW Spurious rejection60dB Power supply Two 5th 1.5VAA batteries Headset Microphone Beltpack Transmitter Remote Control Power Cable
(4) x '12V.5A' Batteries Technical Specs:
Max Power Output: 0.001 Watt Amplifier Class: D Impedance: 4 Ohm T.H.D.: <0.5%
Sensitivity: 95dB (+/-2dB) Mic Input Level: <15mV Line Input/Output Level: >250mV Frequency Response: 80-20kHz Digital Audio File Compatibility: MP3, WMA Maximum SD/USB Flash Memory Support: 32GB Power: 100-240V Dimensions (L x W x H): 18.9'' x 14.6'' x 24.8''
7 www.PyleUSA.com FCC warning:
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 74 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interferenc e that may cause undesired operation. NOTE 1: The manufacturer is not responsible for any changes or mo difications not expressly approved by the manufacturer for compliance, such modifications could void the users authority to operate the equipment. NOTE 2: This device complied with FCC radiation exposure limits as set forth for an uncontrolled environment. This device should be installed and operated so that its antenna(s) are not co located or operating in conjunction with any other antenna or transmitt er