FCC ID: 2ACNS-GTPR1 Garage light

LED Laser Light Galaxy Speaker Product Instruction Manual Please read carefully prior to use. LED laser projects an intense green star grid onto wall and ceiling. Position the LED laser side of the housing against a wall to help ensure you don t accidentally stare at direct or reflected beams. Exposure to beam can cause eye injury. Avoid reflected beams from glass and shiny surfaces. Choosing Safe Location 1.Select a level location near a wall with clear line of sight upwards to the ceiling that is also away from glass or shiny surfaces. 2. Position the laser light against the wall with the controls facing outward. 3. If possible, locate above eye level or in the corner of a room for added safety. 4. Never shine LED laser in eyes or out a window towards a street, moving vehicle or aircraft. 5. LED lighting effects work best in darker spaces and low light conditions. 6. Toggle dimmer wheel to low light output during setup to avoid accidental exposure. Please call customer service at 1-800-865-6799 with any questions Specifications Power Input: USB DC 5V, 2A Speaker Output: 4 Ohms, 5 Watts Wireless: Bluetooth 4.0 Power Cord: 5FT USB-A to USB-C LED Nebula: RGBW LEDs Diode Laser: Max Output 15mW - Wavelength 532nm The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. FCC Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER AUTHORITY TO OPERATE THE EQUIPMENT. Connecting Speaker and Playing Music 1. Open Bluetooth settings on smartphone and connect to BTK10. 2. Play music using your favorite App and control speaker volume with your phone. 3. Speaker has onboard controls for play, pause, selecting tracks and volume. 4. Connect directly to the speaker using the USB input port. 5. Press microphone button on the remote control to make the lights sound reactive and move to the music. For best results, point remote control at remote sensor on the Galaxy Speaker. Press the power button for LED nebula, laser light and / or speaker to turn the feature on or off Press any 2 of the red, green, blue and white light buttons at once for more LED nebula colors Control nebula light wave motion by pressing S+ to increase speed and S- to decrease speed Press laser light button to make the green stars stay on constantly or fade in nd out Press microphone music mode button to make lights sound reactive and move to the music Use audio controls on remote to play, pause, select tracks and adjust volume once your device is paired and streaming music LED nebula, laser light and speaker can all be powered on/off separately to use features independently Care Instructions Power off and unplug the speaker. Wipe clean or dust with a soft cloth. Dampen cloth as needed. Do not get the housing wet. Allow to air dry completely prior to use. WARNING! IMPORTANT CARE AND SAFEGUARDS Failure to follow the safety instructions can lead to fire, electrical shock, personal injury or property damage and damage to this product. Do not use galaxy speaker for anything Other than its intended use Keep away from children. This is not a toy. Children should not be permitted to use Class 3B lasers Any teenager using a Class 3B laser should be continuously supervised by a responsible adult Do not use near babies, children or individuals with certain disabilities Always be aware of beam location. Keep away from heads and eyes Watch out for reflected beams from glass and shiny surfaces Never point any laser toward an aircraft, vehicle in motion, towards a street or out a window Never use a Class 3B laser as a laser pointer Do not get wet or expose this product to rain, water or excessive humidity Keep away from extreme heat sources and intense sunlight Always use this product in operating temperatures of 32F (0C) - 95F (35C) Keep surface free of dust and dirt, clean periodically Never take this device apart or attempt to repair yourself Never shine LED light in anyones eyes Eye injury can result from exposure to beam or improper use RF Exposure Statement The distance between user and products should be no less than 20cm. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE Any questions, please call customer service at 1-800-865-6799 8:30am - 5pm, PST. Monday - Friday, or email us at customerservice@jlrgear.com Operating Instructions 1. Plug USB power cord into speaker (Fig A). 2. Connect to a USB power source rated 2 amps of greater. Power source not included (Fig B). 3. Locate battery compartment on the back of the remote control. Install 2 AAA batteries in the proper orientation (batteries not included). 4. Locate power switch on the speaker and power on. 5. Locate Laser button on remote or speaker and turn on LED laser to project a green star grid (Fig C). 6. Locate LED button on remote or speaker and turn on the multicolor nebula wave light.

AMY yg nye NN \ AW SY 7 8 7 PES 1217 13-14 15 1G 11 18 19 29 Ae shi Lut Aratutnti Latin sire ANN cm JF Sf 6

NINGBO JINGHUI OPTO-ELECTRONIC CO., LTD Letter of Authorization Company: NINGBO JINGHUI OPTO-ELECTRONIC CO., LTD Address: No.616 Qingqing Road, The District B, Zhenhai Economic Development Zone, Ningbo, China Product Type: LED LASER LIGHT GALAXY SPEAKER Model Number(s): STG-6816-KB, GT-PR-1 Product Description: LED LASER LIGHT GALAXY SPEAKER We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: 2022-06-09 Name:

Gordon Bai Title:

General Manager Company: NINGBO JINGHUI OPTO-ELECTRONIC CO., LTD

Differences Declaration To whom concern, We company NINGBO JINGHUI OPTO-ELECTRONIC CO., LTD hereby declares: The product models STG-6816-KB, GT-PR-1 are identical in the same PCB layout, interior structure and electrical circuits, The differences are appearance color and model number for commercial purpose. Authorized signature:

Date: 2022-06-09

NINGBO JINGHUI OPTO-ELECTRONIC CO., LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2022-06-09 Subject; Request for Confidentiality FCC ID: 2ACNS-GTPR1 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description External Photos Test Setup Photos Internal Photos User Manual In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Gordon Bai Title: General Manager