FCC ID: 2AIWW-PD-V5-N Microwave Sensor

High-frequency Microwave Sensor PD-V5-N instruction PD-V5-N 360 5.8GHz Microwave Motion Sensor Application Intelligent switch Automatic light Intruder detect Feature and advantage Low wireless power output Low power consumption Non-contact detection Easy to match with the external circuit High anti-jamming ability Suit various harsh environment Low noise output Detecting Pattern 15 14 13 12 11 10 9 12345678 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 PD-V5-N 360 5.8GHz Microwave Motion Sensor is a C-Band Bi-Static Doppler transceiver modlue .It adopts built-in Resonator Oscillator (CRO) amplificated signal external circuit,It is convenient for the customers to develop various products. This module is ideally suiable for occupancy sensor in automatic lighting switches.It can also be used for ceiling mount intruder detectors. According with EN 300440EN 62479 RED directive - 2014/53/EU According with FCC Part 15.249 According with EN 62321,ROHS directive - 2011/65/EU According with REACH directive - 1907/2006/EC Products size 17.2mm m m 2

. 7 1 m m 5 2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 X1 X2 X3 Signal output GND Vcc X1: 4.5mm X2: 5.2mm X3: customizable M o v e m e n t d i r e c t i o n

(unit:m) Parameter Notes Frequency Setting Radiated Power (EIRP) Received Signal Strength Supply Voltage Current Consumption Operating Temperature 1 1 2 Min 5.750 0.18 150 4.75 18.5

-30 Typ 5.80 0.20 200 5.00 19 25 Max 5.850 0.22 300 5.25 19.5 105 Units GHz mW Vp-p V mA Note1: The radiated emissions is designed to meet FCC and CE rules. Note2: The Received Signal Strength(RSS) is measured at the total 1 Ways path loss of 64dB. Add: Room 1212, Building B, Ningbo Chamber of Commerce Building, 588 Tiantong South Road, Ningbo City, Zhejiang Province Tel: 86-574-83008608(20 lines) Email: pdlux@pdlux.com Web: www.pdlux-solution.com www.pdlux.com www.pdlux-solution.com www.pdlux.com Tel: 86-574-83008608 High-frequency Microwave Sensor PD-V5-N instruction This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the device and receiver.

--Connect the device into an outlet on a circuit different from that to which the receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment Add: Room 1212, Building B, Ningbo Chamber of Commerce Building, 588 Tiantong South Road, Ningbo City, Zhejiang Province Tel: 86-574-83008608(20 lines) Email: pdlux@pdlux.com Web: www.pdlux-solution.com www.pdlux.com www.pdlux-solution.com www.pdlux.com Tel: 86-574-83008608

PD-V5-N Microwave Sensor Model:PD-V5-N HF:5.8GHz Ta:-30~+105C FCC ID:2AIWW-PD-V5-N www.pdlux-solution.com 15.5x15.5mm

3 3 s= i

2 aoe 8 =

Ss pi inj Prep PTET] EET YY FTEY VT {UVUTPE UNTO ETT WW

=8 Oe Ja OL 08 06 QQyOt &

=8

= 09-02 08 06 00101 oz oF oY 05 09

\v\\

Z0z O Ov Wrilintuwntun praratturtunattuthatu titty

January 10, 2024 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Shenzhen Timeway Testing Laboratories/ Zone C, 1st Floor, Zone C, 1st Floor, Block B, Jun Xiang Da Building, Zhongshan Park Road West, Tong Le Village, Nanshan District, Shenzhen, China (Name of Agent company name and address) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commissions regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with N i n g b o P d l u x E l e c t r o n i c T e c h n o l o g y C O . , L T D . / 17F, Commerce building of Ningbo, No 588, south Tiantong road,yinzhou district Ningbo, China

<Signature>

NameShihai Xu TitleEngineer Applicant CompanyNingbo Pdlux Electronic Technology CO., LTD.

January 10, 2024 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AIWW-PD-V5-N Product Name: Microwave Sensor Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:

Schematics Block diagram Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors.

<Signature>

NameShihai Xu TitleEngineer Applicant CompanyNingbo Pdlux Electronic Technology CO., LTD.

Ningbo Pdlux Electronic Technology CO.,LTD. Covered Equipment Certification Attestation Letter 1/4/2024 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: 2AIWW-PD-V5-N Ningbo Pdlux Electronic Technology CO.,LTD. (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not covered equipment. Ningbo Pdlux Electronic Technology CO.,LTD. (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Signed:

Printed name: Shihai Xu Title: Engineer Company Name: Ningbo Pdlux Electronic Technology CO.,LTD. Date: 1/4/2024

Ningbo Pdlux Electronic Technology CO.,LTD. U.S. Agent Designation for Service of Process -

Certification Attestation Letter 1/4/2024 TO: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 ATTN.: Reviewing Engineer FCC ID: 2AIWW-PD-V5-N FRN of applicant: 0025694423 Per section 2.911(d)(7) of the FCC rules, NINGBO PDLUX ELECTRONIC TECHNOLOGY CO.,LTD. (the applicant) certifies that the equipment for which authorization is sought is designated to the following U.S. agent* for service of process:

Company Name: Stariver Consulting Company FCC Registration Number (FRN): 0033610684 Physical U.S. Company Address: 2363 James St #1098 Syracuse, NY 13206, USA Contact Person: Chong He Agent Email Address: stariverusagent@gmail.com The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed:

Agent Signed:

Signed:

Printed name: Shihai Xu Title: Engineer Company Name: NINGBO PDLUX ELECTRONIC TECHNOLOGY CO.,LTD. Date: 1/4/2024 Signed:

Printed name: Chong He Title: Manager Company Name: Stariver Consulting Company Date: 1/19/2024

* the applicant must designate a contact located in the United States for purposes of acting as the applicants agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process.