FCC ID: 2AIQW-V2312 Active Speaker

OWNERS MANUAL SimmonsDrums.net 19376886 Simmons DA2012B manual.indd 1 4/1/19 2:20 PM QUICK START GUIDE SETTING UP / HELPFUL TIPS Position the DA2012B in the desired location, and ensure the amp is stable. Make sure the Power Switch is off. Turn Channel 1, 2, and 3 knobs to minimum. Turn Bass and Treble to center/straight up. DA2012B can be used as an upward-angled oor monitor, on a pole, or standing vertically on the oor or other stable surface. MAKING THE CONNECTIONS Connect sources to Channel 1, 2 and 3 input jacks as desired.

(All these input jacks can be used at once, along with Bluetooth audio input.) CHECK SWITCHES Check that Mono / Stereo Master / Link In switch is set to Mono. POWERING UP Power on any devices connected to input jacks. Turn up the output volume of all sources. Turn Channel 1, 2 and 3 knobs to desired levels. FOR FLOOR MONITOR USE Press rear panel VOICINGS button to light one of the FLOOR LEDs. FOR USE ON POLE OR FREE STANDING VERTICALLY Press rear panel VOICINGS button to light one of the POLE LEDs. Floor Monitor Main BLUETOOTH AUDIO INPUT From your Bluetooth audio source device, look for DA2012B and See next page for Bluetooth Troubleshooting in case of difculty. FRONT LED LIGHT Check that rear panel button for FRONT LED is pressed in (On/Limit When front LED lights red, limiter is being triggered, and Channel 1, 2, and 3 knobs may need to be turned down select it. position) 2 Speaker stand not included 19376886 Simmons DA2012B manual.indd 2 4/1/19 2:20 PM DA2012B ADVANCED DRUM AMPLIFIER SMART STEREO WITH DA2012B 4 1 2 3 A pair of DA2012B drum ampliers can operate together as a Smart Stereo system, giving you control of the sound and volume of both ampliers from the rst master amplier, and optimally distributing all audio inputs to both ampliers for rich stereo sound. 1 Connect all inputs and make all sound settings on the rst (left) unit only. The second (right) units inputs and controls are all disabled when it is set to Link In. 2 Set the switch on rst unit to Stereo Master. 3 Set the switch on second unit to Link In. 4 Connect an XLR (microphone) cable from the rst units OUT jack to the second units LINK IN. BLUETOOTH TROUBLESHOOTING These steps should resolve any Bluetooth trouble you may encounter:

Power off the DA2012B and leave it off On your Apple iOS device 1. Open Settings app, select Bluetooth 2. If DA2012B is listed under MY DEVICES, touch info button, tap to Forget This Device 3. Turn off Bluetooth, wait 10 seconds, turn on Bluetooth On your Android device 1. Open Settings, select Bluetooth 2. If DA2012B is listed under Paired Devices, touch gear Icon, and tap to Unpair 3. Turn off Bluetooth, wait 10 seconds, turn on Bluetooth Then power on your DA2012B, and Bluetooth LED should ash You should now be able to connect to DA2012B via Bluetooth 19376886 Simmons DA2012B manual.indd 3 3 4/1/19 2:20 PM DA2012B BACK PANEL 1 2 4 5 3 6 7 10 8 9 11 12 13 1 VOICINGS Pressing the button selects from the available voicings (tunings) for different applications:

- FLOOR Normal: standard tuning, for use as a oor monitor

- FLOOR Boost: boosts lows and highs, which can be useful for low volume use, or to hear yourself better alongside other musicians amps

- POLE Normal: standard tuning, for use on a pole, or when standing vertically

- POLE Boost: boosts lows and highs, which can be useful for low volume use, or to hear yourself better alongside other musicians amps 2 CHANNEL 1, 2 and 3 KNOBS These knobs set the volume for the inputs below them. Channel 3 knob sets the level of Bluetooth audio as well as the other Channel 3 audio inputs. 3 BALANCED LINE INPUTS Balanced or unbalanced line level sources can be connected here Bluetooth audio input is automatically enabled each time you turn the amplier on, will automatically reconnect to the previous Bluetooth audio source if it is available, and will otherwise be available for Bluetooth pairing from a source audio device such as a smartphone

- To pair, look for DA2012B from your Bluetooth audio source device.

- LED is lit solid when currently paired, blinking when available for pairing, and off if Bluetooth has been disabled by a press of the Bluetooth Off button.

- On/Pair button forces any currently connected Bluetooth audio source to disconnect, and makes the speaker available for pairing.

- Off button disables Bluetooth. (Bluetooth will be re-enabled next time you turn power off and on, or if you press the On/Pair button.) 5 AUX INPUT Audio from smartphones, computers and other consumer audio devices can be connected here 6 BASS AND TREBLE KNOBS Adjust the sound of your amplier 7 MONO / STEREO MASTER / LINK IN SWITCH

- Mono: This DA2012B will output mono audio, and send mono audio to the OUT jack so its available for any other amplier or sound system.

- Stereo Master: This DA2012B will operate as the master unit of a Smart Stereo pair. Use a mic cable to connect this DA2012Bs OUT to the LINK IN jack of a second DA2012B. All inputs should be connected to the rst master amplier, which will also set the volume and tone of both DA2012Bs.

- Link In: Use this setting for the second DA2012B of a Smart Stereo pair. The audio from the LINK IN will be routed directly to the power amp and speaker, with all other inputs and controls being ignored. 8 OUT JACK Congured by 7 switch

- Mono: sends out mono audio

- Stereo Master: sends out right audio, for second DA2012Bs

- Link In: sends out the same audio received at the LINK IN jack 9 LINK IN JACK Activated only when 7 switch is set to LINK IN 10 FRONT LED SWITCH

- On: Front LED is lit white when power is on

- On/Limit: LED lights red when limiter is active, and otherwise is lit white If limiter is continuously or frequently active, turn down Channel 1, 2 or 3 knobs to reduce volume 11 Connect power cable here 12 If the DA2012B will not power on and you suspect its fuse may have blown, turn off the power switch, and open the fuse compartment using a small at blade screwdriver. If metal strip in fuse is broken, replace with T5AL 250V fuse. 13 Switches the power on and off 4 BLUETOOTH AUDIO INPUT LINK IN 4 19376886 Simmons DA2012B manual.indd 4 4/1/19 2:20 PM SPECIFICATIONS DA2012B ADVANCED DRUM AMPLIFIER Amplier DSP Limiter Smart Stereo Input 1 Input 2 Input 3 Link In Out Jack Power Output Bass EQ Knob Treble EQ Knob Volume Power Input Selectable Voicing (Floor Normal, Floor Boost, Pole Normal, Pole Boost) and Bass and Treble knobs all control the internal DSP to customize the sound Transparent, dynamic DSP limiter for ideal sound quality and system protection at maximum volume A pair of DA2012B ampliers can be connected for unied volume and tone control from the rst master amplier, with optimal distribution of mono and audio signals between both ampliers Stereo Line: Left/mono and right 1/4-inch TRS balanced/unbalanced compatible audio line inputs Stereo Line: Left/mono and right 1/4-inch TRS balanced/unbalanced compatible audio line inputs Stereo Line: Left/mono and right 1/4-inch TRS balanced/unbalanced compatible audio line inputs Aux: 1/8-inch mini TRS unbalanced input Bluetooth Audio: with On/Pair and Off buttons plus LED XLR balanced +4dBv audio input XLR balanced +4dBv audio output 2000 Watts Peak

+/-12dB Shelf, 100Hz

+/-12dB Shelf at 10kHz volume control per channel 115V/60 Hz Removable AC Power Cord Features Front LED, congurable to indicate power or power/limiter Voicing button and 4 voicing indicator LEDs Speaker Type 12 2-way vented design Frequency Response Max SPL@1M 40-20K Hz 126dB HF Driver LF Driver Cabinet Grille Compression Driver, 8 Ohm 12 Driver, 4 Ohm Polypropolene, with rubber surfaced handles and feet 1.2mm steel Suspension Points DA2012B Is Not Designed For Suspension Pole Mount 35mm stand pole with M6 screw Product Dimensions 14.2 x 14.2 x 24.1 Dimensions and Weights Packaging Size Net Weight Gross Weight 18.1 x 18.1 x 28.1 35 pounds 45 pounds 19376886 Simmons DA2012B manual.indd 5 5 4/1/19 2:20 PM IMPORTANT SAFETY INSTRUCTIONS Please keep this instruction manual for future reference and for the duration of owning the Simmons DA2012B Advanced Drum Amplier. Please carefully read and understand the instructions inside this owners manual before attempting to operate your new powered loudspeaker. This instruction manual includes essential safety information regarding the use and maintenance of the amplier. Take special care to heed all warning symbols and signs inside this manual and those printed on the amplier on the back of the loudspeaker. WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE AMPLIFIER TO WATER/MOISTURE, NOR SHOULD YOU OPERATE THE AMPLIFIER NEAR ANY WATER SOURCE. The exclamation point triangular symbol is intended to alert the user to the presence of important operating and maintenance(servicing) instructions in the user manual accompanying the Amplier. The lightning ash with an arrow triangular symbol is intended to alert the user to the presence of non-insulated dangerous voltage within the products enclosure, and may be of sufcient magnitude to constitute a risk of electric shock. WARNING Handle the power supply cord with care. Do not damage or deform it as it may cause electric shock or malfunction when used. Hold the plug attachment when removing from wall outlet. Do not pull on the power cord. IMPORTANT SAFETY PRECAUTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all Instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. DO NOT turn on the amplier module before connecting all other external devices. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachment/accessories specied by the manufacturer. 12. Use only the cart, stand, tripod, bracket or table specied by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-

supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. POWER SOURCES This product should be operated only from the type of power source indicated on the rating label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. 16. WALL OR CEILING MOUNTING The product should never be mounted to a wall or ceiling. 17. Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. 18. OBJECT AND LIQUID ENTRY Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. 19. Water and Moisture: This product should be kept away from direct contact with liquids. The apparatus shall not be exposed to dripping or splashing and that no objects lled with liquids, such as vases, shall be placed on the apparatus. 20. Keep the speaker system out of extended or intense direct sun light. 21. No containers lled with any type of liquid should be placed on or near the speaker system. 22. SERVICING The user should not attempt any service to the speaker and/or amplier beyond that described in the operating instructions. All other servicing should be referred to qualied service personnel. 23. VENTILATION Slots and openings in the amplier are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack. 24. Protective earthing terminal: The apparatus should be connected to a main socket outlet with a protective earthing connection. 25. ACCESSORIES Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. 26. When moving or not using the appliance, secure the power cord

(e.g., wrap it with a cable tie). Be careful not to damage the power cord. Before using it again, make sure the power cord has not been damaged. If the power cord has been damaged at all, bring the unit and cord to a qualied service technician for repair or replacement as specied by the manufacturer. 27. LIGHTNING For added protection during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the product due to lightning and power-line surges. 28. REPLACEMENT PARTS When replacement parts are required, be sure the service technician has used replacement parts specied by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in re, electric shock, or other hazards. 6 19376886 Simmons DA2012B manual.indd 6 4/1/19 2:20 PM IMPORTANT SAFETY INSTRUCTIONS DA2012B ADVANCED DRUM AMPLIFIER To prevent electric shock, do not use a polarized plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure. RISK OF ELECTRIC SHOCK DO NOT OPEN RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: To reduce the risk of electric shock, do not remove chassis. No user-serviceable parts inside. Refer servicing to qualified service personnel. AVERTISEEMENT: Pour rduire les risques dincendie et dlectrocution, ne pas exposer ce matrial la pluie ou lhumidit. THIS SYMBOL IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE UNIT. APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. HEARING DAMAGE AND PROLONGED EXPOSURE TO EXCESSIVE SPLs Simmons DA2012B Advanced Drum Ampliers are capable of producing extremely loud volume levels that can cause permanent hearing damage to performers, production crews or the audience. Hearing protection is recommended during long-term exposure to high SPLs (sound pressure levels). Remember, if it hurts, it is denitely too loud! Long term exposure to high SPLs rst causes temporary threshold shifts; limiting your ability to hear the actual loudness and exercise good judgment. Repeated long term exposure to high SPLs will cause permanent hearing loss. Please note the recommended exposure limits in the accompanying table. More information about these limits is available on the US government Occupational Safety and Health (OSHA) website at: www.osha.gov. Permissible Noise Exposures (1) Duration per day, hours Sound level dBA slow response 8 6 4 3 2 1.5 1 0.5 0.25 or less 90 92 95 97 100 102 105 110 115 19376886 Simmons DA2012B manual.indd 7 7 4/1/19 2:20 PM WARRANTY Two (2) Years limited warranty Subject to the limitations set forth below, Simmons hereby represents and warrants that the components of this product shall be free from defects in workmanship and materials, including implied warranties of merchantability or tness for a particular purpose, subject to normal use and service, for three

(3) years to the original owner from the date of purchase. Retailer and manufacturer shall not be liable for damages based upon inconvenience, loss of use of product, loss of time, interrupted operation or commercial loss or any other incidental or consequential damages including but not limited to lost prots, downtime, goodwill, damage to or replacement of equipment and property, and any costs of recovering, reprogramming, or reproducing any program or data stored in equipment that is used with Simmons products. This guarantee gives you specic legal rights. You may have other legal rights which vary from state to state. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Simmons P.O. Box 5111 Thousand Oaks, CA 91359-5111 All trademarks and registered trademarks mentioned herein are recognized as the property of their respective holders. FCC STATEMENT 1. Caution: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 2. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuming the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician and receiver. for help. Warning: Changes or modications to this unit not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. FCC Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used xed/mobile (min20cm) exposure condition without restriction. MISSING damaged parts?

CALL 888-621-4008 TOLL FREE assembly questions?

OR VISIT OUR WEBSITE AT: simmonsdrums.net 8 19376886 Simmons DA2012B manual.indd 8 1904-19376886 4/1/19 2:20 PM

CAUTION To prevent electric shock hazard, do not connect to mains power supply while grille is removed.

-The use of apparatus in moderate climates;

-No naked ame sources, such as lighted candles, should be placed on the apparatus;

- Minimum distances 10cm around the apparatus for sucient ventilation;

-The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table cloths, curtains etc.

-WARNING: To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture. This device complies with part15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference,and

(2)this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement This equipment complied with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

(@1M)

FCC ID: 2AIQW-V2312 Label FCC ID: 2AIQW-V2312 Label This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

External photos FCC ID: 2AIQW-V2312 External photos FCC ID: 2AIQW-V2312 External photos FCC ID: 2AIQW-V2312 External photos FCC ID: 2AIQW-V2312

Internal photos FCC ID: 2AIQW-V2312 Internal photos FCC ID: 2AIQW-V2312 FW3230 ANT1(24022480MHz) Internal photos FCC ID: 2AIQW-V2312 Internal photos FCC ID: 2AIQW-V2312

Ningbo Tonwel Audio Co., Ltd Declaration concerning Antenna Specification It is hereby declared that the product Model No.: DA2012B FCC ID: 2AIQW-V2312 fulfills the requirement in FCC test relating to the antenna type. The device specified above confirms to the FCC recommendations for PCB antenna type(s) described below:

Model No. of antenna: ANT1 Type of antenna:

PCB antenna Gain of the antenna:

Frequency range:

1 dBi 2402-2480MHz The mounting of the antenna is fixed to the radio module and no other antenna should be used. Company name: Ningbo Tonwel Audio Co., Ltd Address:

City:

ZIP / Postal code:

Country:

Place:

China Zhihong Fu Date: 2019-06-24 No. 28, Xiyi Road, Jiangshan Town, Yinzhou, Ningbo, China Ningbo

Ningbo Tonwel Audio Co., Ltd Date Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Request of Class II Permissive Change Company name Ningbo Tonwel Audio Co., Ltd FCC ID: 2AIQW-V2312 FCC Part 15 Certification Gentlemen, This is to request a Class II Permissive Change for FCC ID: 2AIQW-V2312 originally granted on 01-29-2019 The major change filed under application is:

Change 1: Trademark and model name are different Change 2: CH1 and CH2 channels have different functions, V2312 is multi-function adjustable socket, DA2012B is TRS6.35 stereo socket, Please see the picture below(marked red). V231 2 version01 DA2012B If you have any questions regarding this application, please feel free to contact Contact name Zhihong Fu Company name Ningbo Tonwel Audio Co., Ltd Phone No.:

+86-0574-88160000 version01