FCC ID: 2AXSO-JH-01 Zigbee Plug

Product Parameter Conguration Steps Model: JH-01 zigbee In/Out:125V AC/50/60Hz Max.Current: 10A RF Standard:Zigbee IEEE 802.15.4 Powered by:Live and Neutral Material: pc,ABS VO Weight:60g Size:48X48X52mm Distinguishing Feature Without other Zigbee hub, directly support Amazon Echo Smart Speaker to cong the controller. After paired, you can use theAlexa APP or Voice to control the device. Support access to Samsung SmartThings hub, Amazon Echo Plus, Amazon Echo Show(2nd) ,eWeLink hub or other HA and 3.0 hub. 5 You can use Amazon Alexa App to and group,routines of modify device names such as bedroom plug,At this point you can use Alexa App or Voice to control the devices. Work with Samsung SmartThings hub&Amazon Alexa Works with Amazon Alexa Conrm that the Blue LED of Zigbee Plug is ashing.If the indicator is always on, press and hold the button until it is ashing or powered o the Zigbee Plug and then power on for 3-8s. Repeat ve times, then the Plug enter cong mode, the Green LED will ash. Wait for the Zigbee Plug Blue LED indicator to be always on, and the Plug is connected to echo plus or echo show(2nd). 1 2 3 4

.secived ym revocsid ,axelA ,ksA plug is ashing.If the indicator is 1 Conrm that the Blue LED of Zigbee always on,press and hold the button until it is ashing or powered o the Zigbee plug and then power on for 3-8s.Repeat ve times,then the plug enter cong mode, the green LED Zigbee plug can be controlled by the button on itself. sihT.gulp tsr no mut ,axelA ,ksA will tum the Plug on. will ash. FCC ID: 2AXSO-JH-01 2 3 4 5 Open the SmartThingS App and add the Zigbee plug.When the green LED indicator is always on ,the plug has bee added to the smartThings hub,If the App does not recognize the device type, please refer to the SmartThings Congn, pdf document. Enable SmartThings Skill in the Amazon Alexa APP or alexa.ama-

zon.com dda nac .secived ym revocsid ,ksA zigbee Plug to amzon smart home. You can use SmartThings App or Amazon Alexa APP to add group,routines or modify device names such as bedroom plug,At this point you can use Alexa App or Voice to control the devices. SmartThings App and Alexa App operation(Add device,group, routines) Alexa APP I: In the Alexa App interface click+ icon, You can add devices and groups. In the device list interface you can control or modify the device type and name, as shown in the following picture. SmartThings App 5:Choose the room you want after entering this interface ,or clickadd new roomthen click next ro dda ot+:kcilC:1 reset the device at the upper right corner on the all device list screen in the smartThings APP. 6:Do what app tells you and wait patiently. 2:In the Alexa App Smart Home interface you can operate the devices conveniently nieciveD ddA tceleS:2 the pop-out window 7: After the device is successfully connected name the device and enoD kcilc noci knileWe tceleS:3 to add device on the add device screen 8: Return to the main interface, device has been added, and you will see the device and you can begin to set. 3:In the Alexa App routines interface you can set up some devices

,axelA ,ksA(stneve dna good morning,It will turn on the bedroom lights,open the curtains, and forecast the weather,trac conditions, to-do items, etc.. eht notxeN kcilC:4 default hub connection interface This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC warning:

Any Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

(Ningbo Xiaojiang IoT Technology Co Ltd) Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AXSO-JH-01 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Block Diagram, Schematics, Operational Description, Schematic Zigbee module BOM File Name Block Diagram .pdf, Schematics .pdf , Operation Description .pdf, Schematic Zigbee module BOM.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commissions public notice, we also request temporary confidential treatment of information accompanying this application as outlined below:

Short-term confidentiality requested: 180 days Exhibit Type External Photos , Internal Photos, Test Setup Photos, Manual Sincerely, File Name External Photos.pdf, Internal Photos.pdf, Test Setup Photos.pdf, User Manual.pdf Jizong chen/Manager Ningbo Xiaojiang IoT Technology Co Ltd Rev 11/20/07

Ningbo Xiaojiang IoT Technology Co Ltd Date: 2020-11-03 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD FCC ID: 2AXSO-JH-01 To Whom It May Concern:

This letter is to ascertain that Ningbo Xiaojiang IoT Technology Co Ltd EUT

: Zigbee Plug

JH-01 zigbee Model Name We will apply for FCC SDOC. If you have any question or concerns, pls. contact us. Sincerely, Clients signature Clients name / title Jizong chen/Manager Contact information / address: Ningbo Xiaojiang IoT Technology Co Ltd /Room 2302-2303,Jiayin Building,No.455,Keji Road,Yinzhou District,Ningbo

Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: November 03, 2020 SUBJECT: FCC Application for FCC ID: 2AXSO-JH-01 To Whom It May Concern:

We, the undersigned, hereby authorize Tony Wei at EMTEK(NINGBO) CO., LTD. on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by EMTEK(NINGBO) CO., LTD. on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Jizong chen/Manager Ningbo Xiaojiang IoT Technology Co Ltd Z:\2020\Xiaojiang()\EN200902006W(ES200902019W)\2.Technical Document\Timco\POA.docx