FCC ID: 2AHGM-S-PFW07-U WIFI Socket

Function Key and Indicator Description:

Short press the power button, Blue indicator lights up means power on, blue indicator lights off means power off. Long press the power button for about 5 seconds, blue indicator flashes means the product begin enter into the distribution network mode. Blue indicator flashes slowly means the network connection is abnormal, please check the router or network configuration. Technical Parameters:

Maximum current: 10A/15A Rated voltage: 110-130V Rated power: 1200W/1800WMax Input voltage: 110-130V Wireless Type: Wi-Fi 2.4GHz Operating temperature: -10 - 50 Support system: Android \IOS Turn On Intelligence Software The free smart life App is required to operate your Wi-

Fi Smart Socket. Its available on the App store and Google Play store for Android and IOS devices. 1.Ensure your IOS / Android device is connected to the internet using a Wi-Fi network. 2.Open the App store/Google Play store on your phone. 3.Search for smart life in the App store/Google Play store. 4. Download the smart life App to your phone. WIFI SMART SOCKET Work with Amazon Echo And Google Home On/Off Plug-In Switch Registration Connecting your Smart Socket to Wi-Fi Youll need to register an account on your smart life app before you can connect your Wi-Fi Smart Socket. 1. 2. Open the App on your IOS / Android device Ensure you click on ALLOW to enable you to control your Wi-

Fi Smart Socket. Please register by clicking on Register in the top right corner of the App. You will be prompted to enter your mobile number or email address to register. Note: If you use a Mobile number you will be sent a text message with your confirmation code to complete your account registration. Once you receive your confirmation code type it in along with a password for the smart life App and select confirm. You can use this to log in to APP. You are now ready to set up your Wi-Fi Smart Socket. 3. 4. 5. 1. Plug your Wi-Fi Smart Socket into an electrical socket and Switch it on. 3. 2. Open up your app and select the + Icon on the top right of the App to add device. Select Plug as the Device Type. The App can also be used to control other compatible Smart Devices. Select Plug as the Device Type. The App can also be used to control other compatible Smart Devices. Select Finish Network Configuration when the blue LED 4. is flashing quickly. If the blue LED light isnt flashing quickly when youve plugged in your Smart Socket keep the Power button in the centre of your Wi-Fi Smart Socket pressed for 5 seconds to reset the device. 5. The App will automatically detect the Wi-Fi network you are connected to. Enter the password of the Wi-Fi Router you are connected to. Click Next when youve entered your Wi-Fi password and the blue LED light is flashing every two seconds 6. Once paired, you will see the following screen with the device you have successfully added. If you do not see this message repeat from Step 1 or refer to the FAQS at the back of the manual for more information. Note: The configuration process should take about 1 minute Max. CORRECT DISPOSAL OF BATTERIES IN THIS PRODUCT This marking on the product, accessories or literature indicates that the product and its electronic accessories should not be disposed of with other household waste. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other wastes for disposal. This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Reference No.: WTX21X08082105W-1 Page 1 of 12 ANNEX EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format FCC ID: 2AHGM-S-PFW07-U Specifications: The label shall be securely affixed to a permanently attached part of the device, in a location where it is visible or easily accessible to the user, and shall not be readily detachable. The label shall be sufficiently durable to remain fully legible and intact on the device in all normal conditions of use throughout the devices expected lifetime. Proposed Label Location on EUT FCC ID Label Location Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn

NINGBO YUSING LIGHTING CO.,LTD.

'No.1199,MINGGUANG RD.JIANGSHAN TOWN, Ningbo, China Date: 2021-09-15 Federal Communications Commission Authorization and Evaluation Division

| Mills Road Confidentiality Request

: 0.457 and 0,459 of the Commission's Rules, we hereby request confidential ion accompanying this application as outlined below:

@ Block Diagram 1D Tune-Up Information B Operational Description O Security Information 1 Schematics 1 Software Defined Radio (SDR) Information Gl Parts List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors, The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. i Sincerely, NINGBO YUSING LIGHTING CO.,LTD.

(2: Ge

NINGBO YUSING LIGHTING co. , LTD. No.1199,MINGGUANG RD

(PCO 1D: 2aHiGM-s~PEWO7-v) hereby authorize Waltek Testing Group (Shenzhen) Co., Ltd. aI, to apply to the Federal Communications Commission on oir eee. BCLS Carried out by Waltek Testing Group (Shenzhen) Co., Jandy So on our behalf shall have the same effect as acts of our own. is to advise that we are in full compliance with the anti-prug Abuse Act We, NINGEO YUSING LIGHTING CO.,LTD. are not subject to a denial of federal Benefits pursuant to Section 5401 of the Anti-Drug Act of 1986, 21 UsceS3a, and HO party to the application is subject to a denial of federal benefit to that section. pursuant Sincerely, NINGEO YUSING LIGHTING Co.,LTD. ler Ca fei cai/MANAGER